Re: [PATCH v2 3/3] arm64: dts: amlogic: a4: add pinctrl node

[Krzysztof Kozlowski <krzk@xxxxxxxxxx>]

On Mon, Oct 14, 2024 at 05:05:53PM +0800, Xianwei Zhao wrote:
> Add pinctrl device to support Amlogic A4.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 36 +++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> index de10e7aebf21..a748351e8b1b 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> @@ -5,6 +5,7 @@
>  
>  #include "amlogic-a4-common.dtsi"
>  #include <dt-bindings/power/amlogic,a4-pwrc.h>
> +#include <dt-bindings/gpio/amlogic-a4-gpio.h>
>  / {
>  	cpus {
>  		#address-cells = <2>;
> @@ -48,3 +49,38 @@ pwrc: power-controller {
>  		};
>  	};
>  };
> +
> +&apb {
> +	periphs_pinctrl: pinctrl@4000 {
> +		compatible = "amlogic,a4-periphs-pinctrl";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0x0 0x0 0x0 0x4000 0x0 0x02e0>;
> +
> +		gpio: bank@0 {
> +			reg = <0x0 0x0 0x0 0x0050>,
> +			      <0x0 0xc0 0x0 0x0220>;
> +			reg-names = "mux", "gpio";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&periphs_pinctrl 0 0 PERIPHS_PIN_NUM>;

Really? Number of pins is coming from the binding?

Best regards,
Krzysztof