Re: [PATCH v2 2/2] pinctrl: qcom: add the tlmm driver for QCS8300 platforms

[Jingyi Wang <quic_jingyw@xxxxxxxxxxx>]

On 10/10/2024 8:56 PM, Dmitry Baryshkov wrote:
> On Wed, Oct 09, 2024 at 03:13:34PM GMT, Jingyi Wang wrote:
>> Add support for QCS8300 TLMM configuration and control via the
>> pinctrl framework.
>>
>> Signed-off-by: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
>> ---
>>  drivers/pinctrl/qcom/Kconfig.msm       |    7 +
>>  drivers/pinctrl/qcom/Makefile          |    1 +
>>  drivers/pinctrl/qcom/pinctrl-qcs8300.c | 1246 ++++++++++++++++++++++++++++++++
>>  3 files changed, 1254 insertions(+)
>>
> 
> [...]
> 
>> +	[125] = PINGROUP(125, phase_flag, _, _, _, _, _, _, _, _, _, egpio),
>> +	[126] = PINGROUP(126, _, _, _, _, _, _, _, _, _, _, egpio),
>> +	[127] = PINGROUP(127, _, _, _, _, _, _, _, _, _, _, egpio),
>> +	[128] = PINGROUP(128, _, _, _, _, _, _, _, _, _, _, egpio),
>> +	[129] = PINGROUP(129, _, _, _, _, _, _, _, _, _, _, egpio),
>> +	[130] = PINGROUP(130, _, _, _, _, _, _, _, _, _, _, egpio),
>> +	[131] = PINGROUP(131, _, _, _, _, _, _, _, _, _, _, egpio),
>> +	[132] = PINGROUP(132, _, _, _, _, _, _, _, _, _, _, egpio),
>> +	[133] = UFS_RESET(ufs_reset, 0x92000),
>> +	[134] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x89000, 15, 0),
>> +	[135] = SDC_QDSD_PINGROUP(sdc1_clk, 0x89000, 13, 6),
>> +	[136] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x89000, 11, 3),
>> +	[137] = SDC_QDSD_PINGROUP(sdc1_data, 0x89000, 9, 0),
>> +};
>> +
> 
> [...]
> 
>> +
>> +static const struct msm_pinctrl_soc_data qcs8300_pinctrl = {
>> +	.pins = qcs8300_pins,
>> +	.npins = ARRAY_SIZE(qcs8300_pins),
>> +	.functions = qcs8300_functions,
>> +	.nfunctions = ARRAY_SIZE(qcs8300_functions),
>> +	.groups = qcs8300_groups,
>> +	.ngroups = ARRAY_SIZE(qcs8300_groups),
>> +	.ngpios = 134,
> 
> I believe this should be 133.
> 
133 should be right, thanks for review, will fix that.
>> +	.wakeirq_map = qcs8300_pdc_map,
>> +	.nwakeirq_map = ARRAY_SIZE(qcs8300_pdc_map),
>> +	.egpio_func = 11,
>> +};
>> +
> 
Thanks,
Jingyi