Re: [PATCH v6 2/5] arm64: dts: qcom: add Linksys EA9350 V3

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

On Tue, Oct 08, 2024 at 12:34:11AM GMT, Karl Chan wrote:
> Add device tree source for Linksys EA9350 V3
> which is a WiFi router based on the IPQ5018 SoC.
> As of now , only the UART,USB,USB LED,buttons is working.
> The front PWM LED require the IPQ PWM driver.
> Therefore the PWM LED isn't configed in the tree.
> 
> The original firmware of EA9350V3 from Linksys can only boot ARM32 kernels.
> However there seem to a identical device that come with 64bit firmware.
> Also There are seems to be no way to boot ARM64 kernels on EA9350.
> 
> Therefore,the only way to boot on EA9350 V3 is using this tree and a 32bit kernel.
> 
> Signed-off-by: Karl Chan <exxxxkc@xxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../boot/dts/qcom/ipq5018-linksys-jamaica.dts | 109 ++++++++++++++++++
>  2 files changed, 110 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-linksys-jamaica.dts

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

-- 
With best wishes
Dmitry