On Thu, 26 Sep 2024 17:31:19 +0300, Andrei Stefanescu wrote: > Add support for the GPIO driver of the NXP S32G2/S32G3 SoCs. > > Signed-off-by: Phu Luu An <phu.luuan@xxxxxxx> > Signed-off-by: Larisa Grigore <larisa.grigore@xxxxxxx> > Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxx> > Signed-off-by: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx> > --- > .../bindings/gpio/nxp,s32g2-siul2-gpio.yaml | 110 ++++++++++++++++++ > 1 file changed, 110 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/nxp,s32g2-siul2-gpio.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/gpio/nxp,s32g2-siul2-gpio.yaml:25:9: [warning] wrong indentation: expected 10 but found 8 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240926143122.1385658-3-andrei.stefanescu@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.