Re: [PATCH v4 2/4] dt-bindings: gpio: add support for NXP S32G2/S32G3 SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 26, 2024 at 05:31:19PM +0300, Andrei Stefanescu wrote:
> Add support for the GPIO driver of the NXP S32G2/S32G3 SoCs.
> 
> Signed-off-by: Phu Luu An <phu.luuan@xxxxxxx>
> Signed-off-by: Larisa Grigore <larisa.grigore@xxxxxxx>
> Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxx>
> Signed-off-by: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>

What's up with this SoB chain? You're the author what did
the other 3 people do? Are they missing co-developed-by tags?

> ---
>  .../bindings/gpio/nxp,s32g2-siul2-gpio.yaml   | 110 ++++++++++++++++++
>  1 file changed, 110 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/nxp,s32g2-siul2-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/gpio/nxp,s32g2-siul2-gpio.yaml b/Documentation/devicetree/bindings/gpio/nxp,s32g2-siul2-gpio.yaml
> new file mode 100644
> index 000000000000..4556505ee9c9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/nxp,s32g2-siul2-gpio.yaml
> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +# Copyright 2024 NXP
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/nxp,s32g2-siul2-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP S32G2 SIUL2 GPIO controller
> +
> +maintainers:
> +  - Ghennadi Procopciuc <Ghennadi.Procopciuc@xxxxxxx>
> +  - Larisa Grigore <larisa.grigore@xxxxxxx>
> +  - Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
> +
> +description:
> +  Support for the SIUL2 GPIOs found on the S32G2 and S32G3
> +  chips. It includes an IRQ controller for all pins which have
> +  an EIRQ associated.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: nxp,s32g2-siul2-gpio
> +      - items:
> +        - const: nxp,s32g3-siul2-gpio
> +        - const: nxp,s32g2-siul2-gpio
> +
> +  reg:
> +    items:
> +      - description: PGPDO (output value) registers for SIUL2_0
> +      - description: PGPDO (output value) registers for SIUL2_1
> +      - description: PGPDI (input value) registers for SIUL2_0
> +      - description: PGPDI (input value) registers for SIUL2_1
> +      - description: EIRQ (interrupt) configuration registers from SIUL2_1
> +      - description: EIRQ IMCR registers for interrupt muxing between pads
> +
> +  reg-names:
> +    items:
> +      - const: opads0
> +      - const: opads1
> +      - const: ipads0
> +      - const: ipads1
> +      - const: eirqs
> +      - const: eirq-imcrs
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    const: 2
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 2
> +
> +  gpio-ranges:
> +    minItems: 2
> +    maxItems: 2
> +
> +  gpio-reserved-ranges:
> +    minItems: 2
> +
> +patternProperties:
> +  "-hog(-[0-9]+)?$":
> +    required:
> +      - gpio-hog
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - gpio-controller
> +  - "#gpio-cells"
> +  - gpio-ranges
> +  - gpio-reserved-ranges
> +  - interrupts
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    gpio@4009d700 {
> +        compatible = "nxp,s32g2-siul2-gpio";
> +        reg = <0x4009d700 0x10>,
> +              <0x44011700 0x18>,
> +              <0x4009d740 0x10>,
> +              <0x44011740 0x18>,
> +              <0x44010010 0xb4>,
> +              <0x44011078 0x80>;

Huh, I only noticed this now. Are you sure that this is a correct
representation of this device, and it is not really part of some syscon?
The "random" nature of the addresses  and the tiny sizes of the
reservations make it seem that way. What other devices are in these
regions?

Additionally, it looks like "opads0" and "ipads0" are in a different
region to their "1" equivalents. Should this really be represented as
two disctint GPIO controllers?


Cheers,
Conor.

> +        reg-names = "opads0", "opads1", "ipads0",
> +                    "ipads1", "eirqs", "eirq-imcrs";
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +                      /* GPIO 0-101 */
> +        gpio-ranges = <&pinctrl 0 0 102>,
> +                      /* GPIO 112-190 */
> +                      <&pinctrl 112 112 79>;
> +        gpio-reserved-ranges = <102 10>, <123 21>;
> +        interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-controller;
> +        #interrupt-cells = <2>;
> +    };
> -- 
> 2.45.2
> 
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux