[PATCH 0/2] Enable MMIO GPIO on BCMBCA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Broadcom BCA (Broadband Access) SoC:s all have a dirt-simple
MMIO GPIO.

It's exposed as a direction register per 32-bit block at
(base) and a data register per 32-bit block at (block+0x20).

However I wouldn't want to use any of the old compatibles
becaus for this undocumented SoC I have a gut feeling that
there may be registers we don't know about at (block+0x40)
etc and a separate compatible will be needed to slot in
a more elaborate driver later.

Let's do this the hard way and create a new compatible,
and probe regular MMIO with that for now.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
Linus Walleij (2):
      dt-bindings: gpio: Add BCMBCA to MMIO compatibles
      gpio: mmio: Support BCMBCA GPIO compatible

 Documentation/devicetree/bindings/gpio/gpio-mmio.yaml | 1 +
 drivers/gpio/gpio-mmio.c                              | 1 +
 2 files changed, 2 insertions(+)
---
base-commit: 98f7e32f20d28ec452afb208f9cffc08448a2652
change-id: 20240917-bcmbca-gpio-mmio-5da863cf5a5d

Best regards,
-- 
Linus Walleij <linus.walleij@xxxxxxxxxx>





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux