[PATCH v2 7/8] riscv: dts: thead: Add TH1520 pinctrl settings for UART0

[Drew Fustini <dfustini@xxxxxxxxxxxxxxx>]

From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>

Add pinctrl settings for UART0 used as the default debug console on
both the Lichee Pi 4A and BeagleV Ahead boards.

Tested-by: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
Signed-off-by: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
---
 arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 26 ++++++++++++++++++++++
 arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts  | 26 ++++++++++++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index c48f6fd6387b..c5356f674f85 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -82,6 +82,32 @@ &sdio0 {
 	status = "okay";
 };
 
+&padctrl0_apsys {
+	uart0_pins: uart0-0 {
+		tx-pins {
+			pins = "UART0_TXD";
+			function = "uart";
+			bias-disable;
+			drive-strength = <3>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		rx-pins {
+			pins = "UART0_RXD";
+			function = "uart";
+			bias-disable;
+			drive-strength = <1>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
+};
+
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
index 0ae2c20d5641..932838c55f90 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
@@ -29,6 +29,32 @@ chosen {
 	};
 };
 
+&padctrl0_apsys {
+	uart0_pins: uart0-0 {
+		tx-pins {
+			pins = "UART0_TXD";
+			function = "uart";
+			bias-disable;
+			drive-strength = <3>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		rx-pins {
+			pins = "UART0_RXD";
+			function = "uart";
+			bias-disable;
+			drive-strength = <1>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
+};
+
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };

-- 
2.34.1