Re: [PATCH 03/21] dt-bindigs: arm64: adi,sc598 bindings

[Rob Herring <robh@xxxxxxxxxx>]

On Thu, Sep 12, 2024 at 07:24:48PM +0100, Arturs Artamonovs wrote:
> Bindigs for ADI ADSP-SC5xx reset controller

Typo. Here and the subject. Please write complete sentences.

> 
> Signed-off-by: Arturs Artamonovs <Arturs.Artamonovs@xxxxxxxxxx>
> Co-developed-by: Utsav Agarwal <Utsav.Agarwal@xxxxxxxxxx>
> Signed-off-by: Utsav Agarwal <Utsav.Agarwal@xxxxxxxxxx>
> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@xxxxxxxxxxx>
> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@xxxxxxxxxxx>
> Co-developed-by: Greg Malysa <greg.malysa@xxxxxxxxxxx>
> Signed-off-by: Greg Malysa <greg.malysa@xxxxxxxxxxx>
> ---
>  .../bindings/soc/adi/adi,reset-controller.yaml     | 38 ++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/adi/adi,reset-controller.yaml b/Documentation/devicetree/bindings/soc/adi/adi,reset-controller.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..7a6df1cfb709d818d5e3dbcd202938d6aaaaaa9b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/adi/adi,reset-controller.yaml
> @@ -0,0 +1,38 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/adi/adi,reset-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices Reset Controller for SC5XX processor family
> +
> +maintainers:
> +  - Arturs Artamonovs <arturs.artamonovs@xxxxxxxxxx>
> +  - Utsav Agarwal <Utsav.Agarwal@xxxxxxxxxx>
> +
> +description: |

Don't need '|'

> +  SHARC and ARM core reset control unit for starting/stopping/resetting
> +  processors

Complete sentences for top-level description.

> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,reset-controller

Too generic.

> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    rcu: rcu@3108c000 {
> +      compatible = "adi,reset-controller";
> +      reg = <0x3108c000 0x1000>;
> +      status = "okay";

Don't need status in examples.

Shouldn't a reset controller use the reset binding (i.e. #reset-cells)?

All you patches seem to have similar issues, so I'm not going to comment 
on all of them. Please read the documentation in 
Documentation/devicetree/bindings/. It doesn't seem like you have.

Rob