[PATCH v2 18/21] dt-bindings: qcom: geni-se: document support for SA8255P

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add "qcom,sa8255p-geni-se-qup" compatible for representing QUP on
SA8255p.

Clocks are being managed by the firmware VM and not required on
SA8255p Linux VM hence removing it from required list.

CC: Praveen Talari <quic_ptalari@xxxxxxxxxxx>
Signed-off-by: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
---
 .../bindings/soc/qcom/qcom,geni-se.yaml       | 45 ++++++++++++++++++-
 1 file changed, 43 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 7b031ef09669..86eb2b3832cb 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -22,6 +22,7 @@ properties:
     enum:
       - qcom,geni-se-qup
       - qcom,geni-se-i2c-master-hub
+      - qcom,sa8255p-geni-se-qup
 
   reg:
     description: QUP wrapper common register address and length.
@@ -57,8 +58,6 @@ properties:
 required:
   - compatible
   - reg
-  - clock-names
-  - clocks
   - "#address-cells"
   - "#size-cells"
   - ranges
@@ -83,6 +82,17 @@ patternProperties:
     $ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
 
 allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: qcom,sa8255p-geni-se-qup
+    then:
+      required:
+        - clocks
+        - clock-names
+
   - if:
       properties:
         compatible:
@@ -162,4 +172,35 @@ examples:
         };
     };
 
+  - |
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        geniqup@9c0000 {
+            compatible = "qcom,sa8255p-geni-se-qup";
+            reg = <0 0x9c0000 0 0x6000>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+
+            i2c1: i2c@984000 {
+                compatible = "qcom,sa8255p-geni-i2c";
+                reg = <0 0x984000 0 0x4000>;
+                interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                power-domains = <&scmi9_pd 1>;
+            };
+
+            uart4: serial@990000 {
+                compatible = "qcom,sa8255p-geni-uart";
+                reg = <0 0x990000 0 0x4000>;
+                interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+                power-domains = <&scmi11_pd 4>, <&scmi11_dvfs 4>;
+                power-domain-names = "power", "perf";
+            };
+        };
+    };
 ...
-- 
2.34.1





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux