On Sun, Aug 25, 2024 at 01:10:03PM GMT, Yixun Lan wrote:
> SpacemiT's K1 SoC has a pinctrl controller which use single register
> to describe all functions, which include bias pull up/down, drive
> strength, schmitter trigger, slew rate, strong pull up, mux mode.
>
> Signed-off-by: Yixun Lan <dlan@xxxxxxxxxx>
> ---
> drivers/pinctrl/Kconfig | 1 +
> drivers/pinctrl/Makefile | 1 +
> drivers/pinctrl/spacemit/Kconfig | 17 +
> drivers/pinctrl/spacemit/Makefile | 3 +
> drivers/pinctrl/spacemit/pinctrl-k1.c | 1012 +++++++++++++++++++++++++++++++++
> drivers/pinctrl/spacemit/pinctrl-k1.h | 36 ++
> 6 files changed, 1070 insertions(+)
>
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index 7e4f93a3bc7ac..8358da47cd00d 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -583,6 +583,7 @@ source "drivers/pinctrl/qcom/Kconfig"
> source "drivers/pinctrl/realtek/Kconfig"
> source "drivers/pinctrl/renesas/Kconfig"
> source "drivers/pinctrl/samsung/Kconfig"
> +source "drivers/pinctrl/spacemit/Kconfig"
> source "drivers/pinctrl/spear/Kconfig"
> source "drivers/pinctrl/sprd/Kconfig"
> source "drivers/pinctrl/starfive/Kconfig"
> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
> index cc809669405ab..553beead7ffa0 100644
> --- a/drivers/pinctrl/Makefile
> +++ b/drivers/pinctrl/Makefile
> @@ -73,6 +73,7 @@ obj-y += qcom/
> obj-$(CONFIG_ARCH_REALTEK) += realtek/
> obj-$(CONFIG_PINCTRL_RENESAS) += renesas/
> obj-$(CONFIG_PINCTRL_SAMSUNG) += samsung/
> +obj-y += spacemit/
> obj-$(CONFIG_PINCTRL_SPEAR) += spear/
> obj-y += sprd/
> obj-$(CONFIG_SOC_STARFIVE) += starfive/
> diff --git a/drivers/pinctrl/spacemit/Kconfig b/drivers/pinctrl/spacemit/Kconfig
> new file mode 100644
> index 0000000000000..168f8a5ffbb95
> --- /dev/null
> +++ b/drivers/pinctrl/spacemit/Kconfig
> @@ -0,0 +1,17 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Sophgo SoC PINCTRL drivers
> +#
> +
> +config PINCTRL_SPACEMIT_K1
> + tristate "SpacemiT K1 SoC Pinctrl driver"
> + depends on ARCH_SPACEMIT || COMPILE_TEST
> + depends on OF
> + select GENERIC_PINCTRL_GROUPS
> + select GENERIC_PINMUX_FUNCTIONS
> + select GENERIC_PINCONF
> + help
> + Say Y to select the pinctrl driver for K1 SoC.
> + This pin controller allows selecting the mux function for
> + each pin. This driver can also be built as a module called
> + pinctrl-k1.
> diff --git a/drivers/pinctrl/spacemit/Makefile b/drivers/pinctrl/spacemit/Makefile
> new file mode 100644
> index 0000000000000..fede1e80fe0ff
> --- /dev/null
> +++ b/drivers/pinctrl/spacemit/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_PINCTRL_SPACEMIT_K1) += pinctrl-k1.o
> diff --git a/drivers/pinctrl/spacemit/pinctrl-k1.c b/drivers/pinctrl/spacemit/pinctrl-k1.c
> new file mode 100644
> index 0000000000000..9ed9530c78150
> --- /dev/null
> +++ b/drivers/pinctrl/spacemit/pinctrl-k1.c
> @@ -0,0 +1,1012 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2024 Yixun Lan <dlan@xxxxxxxxxx> */
> +
> +#include <linux/bitfield.h>
> +#include <linux/export.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/seq_file.h>
> +#include <linux/spinlock.h>
> +#include <linux/module.h>
> +
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/pinctrl/machine.h>
> +#include <linux/pinctrl/pinconf-generic.h>
> +#include <linux/pinctrl/pinconf.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +
> +#include <dt-bindings/pinctrl/spacemit,k1-pinctrl.h>
> +
> +#include "../core.h"
> +#include "../pinctrl-utils.h"
> +#include "../pinconf.h"
> +#include "../pinmux.h"
> +#include "pinctrl-k1.h"
> +
> +/*
> + * +---------+----------+-----------+--------+--------+----------+--------+
> + * | pull | drive | schmitter | slew | edge | strong | mux |
> + * | up/down | strength | trigger | rate | detect | pull | mode |
> + * +---------+----------+-----------+--------+--------+----------+--------+
> + * 3 bits 3 bits 2 bits 1 bit 3 bits 1 bit 3 bits
> + */
> +
> +#define PAD_MUX GENMASK(2, 0)
> +#define PAD_STRONG_PULL BIT(3)
> +#define PAD_EDGE_RISE BIT(4)
> +#define PAD_EDGE_FALL BIT(5)
> +#define PAD_EDGE_CLEAR BIT(6)
> +#define PAD_SLEW_RATE GENMASK(12, 11)
> +#define PAD_SLEW_RATE_EN BIT(7)
> +#define PAD_SCHMITT GENMASK(9, 8)
> +#define PAD_DRIVE GENMASK(12, 10)
> +#define PAD_PULLDOWN BIT(13)
> +#define PAD_PULLUP BIT(14)
> +#define PAD_PULL_EN BIT(15)
> +
> +#define spacemit_pin_to_reg(pctrl, pin) ((pctrl)->regs + (pin << 2))
> +
> +struct spacemit_pin {
> + u16 pin;
> + u16 flags;
> +};
> +
> +struct spacemit_pinctrl {
> + struct device *dev;
> + struct pinctrl_dev *pctl_dev;
> + const struct spacemit_pinctrl_data *data;
> + struct pinctrl_desc pdesc;
> +
> + struct list_head gpiofuncs;
> +
> + struct mutex mutex;
> + raw_spinlock_t lock;
> +
> + void __iomem *regs;
> +};
> +
> +struct spacemit_pinctrl_data {
> + const struct pinctrl_pin_desc *pins;
> + const struct spacemit_pin *data;
> + u16 npins;
> +};
> +
> +struct spacemit_gpiofunc_range {
> + u32 offset;
> + u32 npins;
> + u32 gpiofunc;
> + struct list_head node;
> +};
> +
> +struct spacemit_pin_mux_config {
> + const struct spacemit_pin *pin;
> + u32 config;
> +};
> +
> +struct spacemit_pin_drv_strength {
> + u8 val;
> + u32 mA;
> +};
> +
> +static unsigned int spacemit_dt_get_pin(u32 value)
> +{
> + return (value >> 16) & GENMASK(15, 0);
> +}
> +
> +static unsigned int spacemit_dt_get_pin_mux(u32 value)
> +{
> + return value & GENMASK(15, 0);
> +}
> +
> +static const struct spacemit_pin *spacemit_get_pin(struct spacemit_pinctrl *pctrl,
> + unsigned long pin)
> +{
> + const struct spacemit_pin *pdata = pctrl->data->data;
> + int i;
> +
> + for (i = 0; i < pctrl->data->npins; i++) {
> + if (pin == pdata[i].pin)
> + return &pdata[i];
> + }
> +
> + return NULL;
> +}
> +
> +static inline enum spacemit_pin_io_type spacemit_to_pin_io_type(
> + const struct spacemit_pin *pin)
> +{
> + return K1_PIN_GET_IO_TYPE(pin->flags);
> +}
> +
> +/* External: IO voltage via external source, can be 1.8V or 3.3V */
> +static const char * const io_type_desc[] = {
> + "None",
> + "Fixed/1V8",
> + "Fixed/3V3",
> + "External",
> +};
> +
> +static void spacemit_pctrl_dbg_show(struct pinctrl_dev *pctldev,
> + struct seq_file *seq, unsigned int pin)
> +{
> + struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> + const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> + enum spacemit_pin_io_type type = spacemit_to_pin_io_type(spin);
> + void __iomem *reg;
> + u32 value;
> +
> + seq_printf(seq, "pin: %u ", spin->pin);
> +
> + seq_printf(seq, "type: %s ", io_type_desc[type]);
> +
> + reg = spacemit_pin_to_reg(pctrl, spin->pin);
> + value = readl(reg);
> + seq_printf(seq, "mux: 0x%08x ", value);
> +}
> +
> +/* use IO high level output current as the table */
> +static struct spacemit_pin_drv_strength spacemit_ds_1v8_tbl[4] = {
> + { (0 << 1), 11 },
> + { (1 << 1), 21 },
> + { (2 << 1), 32 },
> + { (3 << 1), 42 },
> +};
> +
> +static struct spacemit_pin_drv_strength spacemit_ds_3v3_tbl[8] = {
> + { 0, 7 },
> + { 2, 10 },
> + { 4, 13 },
> + { 6, 16 },
> + { 1, 19 },
> + { 3, 23 },
> + { 5, 26 },
> + { 7, 29 },
> +};
Why these two use different format?
> +
> +static inline u8 spacemit_get_ds_value(struct spacemit_pin_drv_strength *tbl,
> + u32 num, u32 mA)
> +{
> + int i;
> +
> + for (i = 0; i < num; i++)
> + if (mA <= tbl[i].mA)
> + return tbl[i].val;
> +
> + return tbl[num - 1].val;
> +}
> +
> +static inline u8 spacemit_get_driver_strength(enum spacemit_pin_io_type type,
> + u32 mA)
> +{
> + switch (type) {
> + case IO_TYPE_1V8:
> + return spacemit_get_ds_value(spacemit_ds_1v8_tbl,
> + ARRAY_SIZE(spacemit_ds_1v8_tbl),
> + mA);
> + case IO_TYPE_3V3:
> + return spacemit_get_ds_value(spacemit_ds_3v3_tbl,
> + ARRAY_SIZE(spacemit_ds_3v3_tbl),
> + mA);
> + default:
> + return 0;
> + }
> +}
> +
> +static int spacemit_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
> + struct device_node *np,
> + struct pinctrl_map **maps,
> + unsigned int *num_maps)
> +{
> + struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> + struct device *dev = pctrl->dev;
> + struct device_node *child;
> + struct pinctrl_map *map;
> + const char **grpnames;
> + const char *grpname;
> + int ngroups = 0;
> + int nmaps = 0;
> + int ret;
> +
> + for_each_available_child_of_node(np, child)
> + ngroups += 1;
> +
> + grpnames = devm_kcalloc(dev, ngroups, sizeof(*grpnames), GFP_KERNEL);
> + if (!grpnames)
> + return -ENOMEM;
> +
> + map = devm_kcalloc(dev, ngroups * 2, sizeof(*map), GFP_KERNEL);
> + if (!map)
> + return -ENOMEM;
> +
> + ngroups = 0;
> + mutex_lock(&pctrl->mutex);
> + for_each_available_child_of_node(np, child) {
> + int npins = of_property_count_u32_elems(child, "pinmux");
> + unsigned int *pins;
> + struct spacemit_pin_mux_config *pinmuxs;
> + u32 config;
> + int i;
> +
> + if (npins < 1) {
> + dev_err(dev, "invalid pinctrl group %pOFn.%pOFn\n",
> + np, child);
> + ret = -EINVAL;
> + goto dt_failed;
> + }
> +
> + grpname = devm_kasprintf(dev, GFP_KERNEL, "%pOFn.%pOFn",
> + np, child);
> + if (!grpname) {
> + ret = -ENOMEM;
> + goto dt_failed;
> + }
> +
> + grpnames[ngroups++] = grpname;
> +
> + pins = devm_kcalloc(dev, npins, sizeof(*pins), GFP_KERNEL);
> + if (!pins) {
> + ret = -ENOMEM;
> + goto dt_failed;
> + }
> +
> + pinmuxs = devm_kcalloc(dev, npins, sizeof(*pinmuxs), GFP_KERNEL);
> + if (!pinmuxs) {
> + ret = -ENOMEM;
> + goto dt_failed;
> + }
> +
> + for (i = 0; i < npins; i++) {
> + ret = of_property_read_u32_index(child, "pinmux",
> + i, &config);
> +
> + if (ret)
> + goto dt_failed;
> +
> + pins[i] = spacemit_dt_get_pin(config);
> + pinmuxs[i].config = config;
> + pinmuxs[i].pin = spacemit_get_pin(pctrl, pins[i]);
> +
> + if (!pinmuxs[i].pin) {
> + dev_err(dev, "failed to get pin %d\n", pins[i]);
> + ret = -ENODEV;
> + goto dt_failed;
> + }
> + }
> +
It will be better to check the power-source before inserting a map.
> + map[nmaps].type = PIN_MAP_TYPE_MUX_GROUP;
> + map[nmaps].data.mux.function = np->name;
> + map[nmaps].data.mux.group = grpname;
> + nmaps += 1;
> +
> + ret = pinctrl_generic_add_group(pctldev, grpname,
> + pins, npins, pinmuxs);
> + if (ret < 0) {
> + dev_err(dev, "failed to add group %s: %d\n", grpname, ret);
> + goto dt_failed;
> + }
> +
> + ret = pinconf_generic_parse_dt_config(child, pctldev,
> + &map[nmaps].data.configs.configs,
> + &map[nmaps].data.configs.num_configs);
> + if (ret) {
> + dev_err(dev, "failed to parse pin config of group %s: %d\n",
> + grpname, ret);
> + goto dt_failed;
> + }
> +
> + if (map[nmaps].data.configs.num_configs == 0)
> + continue;
> +
> + map[nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
> + map[nmaps].data.configs.group_or_pin = grpname;
> + nmaps += 1;
> + }
> +
> + ret = pinmux_generic_add_function(pctldev, np->name,
> + grpnames, ngroups, NULL);
> + if (ret < 0) {
> + dev_err(dev, "error adding function %s: %d\n", np->name, ret);
> + goto function_failed;
> + }
> +
> + *maps = map;
> + *num_maps = nmaps;
> + mutex_unlock(&pctrl->mutex);
> +
> + return 0;
> +
> +dt_failed:
> + of_node_put(child);
> +function_failed:
> + pinctrl_utils_free_map(pctldev, map, nmaps);
> + mutex_unlock(&pctrl->mutex);
> + return ret;
> +}
> +
> +static const struct pinctrl_ops spacemit_pctrl_ops = {
> + .get_groups_count = pinctrl_generic_get_group_count,
> + .get_group_name = pinctrl_generic_get_group_name,
> + .get_group_pins = pinctrl_generic_get_group_pins,
> + .pin_dbg_show = spacemit_pctrl_dbg_show,
> + .dt_node_to_map = spacemit_pctrl_dt_node_to_map,
> + .dt_free_map = pinctrl_utils_free_map,
> +};
> +
> +static int spacemit_pmx_set_mux(struct pinctrl_dev *pctldev,
> + unsigned int fsel, unsigned int gsel)
> +{
> + struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> + const struct group_desc *group;
> + const struct spacemit_pin_mux_config *configs;
> + unsigned int i, mux;
> + void __iomem *reg;
> +
> + group = pinctrl_generic_get_group(pctldev, gsel);
> + if (!group)
> + return -EINVAL;
> +
> + configs = group->data;
> +
> + for (i = 0; i < group->grp.npins; i++) {
> + const struct spacemit_pin *spin = configs[i].pin;
> + u32 value = configs[i].config;
> + unsigned long flags;
> +
> + reg = spacemit_pin_to_reg(pctrl, spin->pin);
> + mux = spacemit_dt_get_pin_mux(value);
> +
> + raw_spin_lock_irqsave(&pctrl->lock, flags);
> + value = readl_relaxed(reg) & ~PAD_MUX;
> + writel_relaxed(mux | value, reg);
> + raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> + }
> +
> + return 0;
> +}
> +
> +static int spacemit_request_gpio(struct pinctrl_dev *pctldev,
> + struct pinctrl_gpio_range *range,
> + unsigned int pin)
> +{
> + struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> + struct spacemit_gpiofunc_range *frange = NULL;
> + struct list_head *pos, *tmp;
> + void __iomem *reg;
> +
> + list_for_each_safe(pos, tmp, &pctrl->gpiofuncs) {
> + frange = list_entry(pos, struct spacemit_gpiofunc_range, node);
> + if (pin >= frange->offset + frange->npins
> + || pin < frange->offset)
> + continue;
> +
> + reg = spacemit_pin_to_reg(pctrl, pin);
> + writel(frange->gpiofunc | PAD_EDGE_CLEAR, reg);
> +
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static const struct pinmux_ops spacemit_pmx_ops = {
> + .get_functions_count = pinmux_generic_get_function_count,
> + .get_function_name = pinmux_generic_get_function_name,
> + .get_function_groups = pinmux_generic_get_function_groups,
> + .set_mux = spacemit_pmx_set_mux,
> + .gpio_request_enable = spacemit_request_gpio,
> +};
> +
> +#define PIN_CONFIG_K1_SLEW_RATE_ENABLE (PIN_CONFIG_END + 1)
> +#define PIN_CONFIG_K1_STRONG_PULL_UP (PIN_CONFIG_END + 2)
> +
> +static const struct pinconf_generic_params spacemit_pinconf_custom_params[] = {
> + { "spacemit,slew-rate-disable", PIN_CONFIG_K1_SLEW_RATE_ENABLE, 0 },
> + { "spacemit,slew-rate-enable", PIN_CONFIG_K1_SLEW_RATE_ENABLE, 1 },
> + { "spacemit,strong-pull-up", PIN_CONFIG_K1_STRONG_PULL_UP, 1 },
default enable?
> +};
> +
> +static int spacemit_add_gpio_func(struct device_node *node, struct spacemit_pinctrl *pctrl)
> +{
> + const char *propname = "spacemit,gpio-range";
> + const char *cellname = "#spacemit,gpio-range-cells";
> + struct of_phandle_args gpiospec;
> + struct spacemit_gpiofunc_range *range;
> + int ret, i;
> +
> + for (i = 0; ; i++) {
> + ret = of_parse_phandle_with_args(node, propname, cellname,
> + i, &gpiospec);
> + /* Do not treat it as error. Only treat it as end condition. */
> + if (ret) {
> + ret = 0;
> + break;
> + }
> + range = devm_kzalloc(pctrl->dev, sizeof(*range), GFP_KERNEL);
> + if (!range) {
> + ret = -ENOMEM;
> + break;
> + }
> + range->offset = gpiospec.args[0];
> + range->npins = gpiospec.args[1];
> + range->gpiofunc = gpiospec.args[2];
> + mutex_lock(&pctrl->mutex);
> + list_add_tail(&range->node, &pctrl->gpiofuncs);
> + mutex_unlock(&pctrl->mutex);
> + }
> +
> + return ret;
> +}
> +
> +static int spacemit_pinconf_get(struct pinctrl_dev *pctldev,
> + unsigned int pin, unsigned long *config)
> +{
> + struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> + int param = pinconf_to_config_param(*config);
> + u32 value, arg;
> +
> + if (!pin)
> + return -EINVAL;
> +
> + value = readl(spacemit_pin_to_reg(pctrl, pin));
> +
> + switch (param) {
> + case PIN_CONFIG_BIAS_DISABLE:
> + arg = !FIELD_GET(PAD_PULL_EN, value);
> + break;
> + case PIN_CONFIG_BIAS_PULL_DOWN:
> + arg = FIELD_GET(PAD_PULLDOWN, value);
> + break;
> + case PIN_CONFIG_BIAS_PULL_UP:
> + arg = FIELD_GET(PAD_PULLUP, value);
> + break;
> + case PIN_CONFIG_DRIVE_STRENGTH_UA:
> + arg = FIELD_GET(PAD_DRIVE, value);
> + break;
> + case PIN_CONFIG_INPUT_SCHMITT:
> + arg = FIELD_GET(PAD_SCHMITT, value);
> + break;
> + case PIN_CONFIG_SLEW_RATE:
> + arg = FIELD_GET(PAD_SLEW_RATE, value);
> + break;
> + case PIN_CONFIG_K1_SLEW_RATE_ENABLE:
> + arg = FIELD_GET(PAD_SLEW_RATE_EN, value);
> + break;
> + case PIN_CONFIG_K1_STRONG_PULL_UP:
> + arg = FIELD_GET(PAD_STRONG_PULL, value);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + *config = pinconf_to_config_packed(param, arg);
> +
> + return 0;
> +}
> +
> +static int spacemit_pinconf_generate_config(const struct spacemit_pin *spin,
> + unsigned long *configs,
> + unsigned int num_configs,
> + u32 *value)
> +{
> + enum spacemit_pin_io_type type;
> + int i, param;
> + u32 v = 0, voltage = 0, arg, val;
> +#define ENABLE_DRV_STRENGTH BIT(1)
> +#define ENABLE_SLEW_RATE BIT(2)
move this before the function.
> + u32 flag = 0, drv_strength, slew_rate;
> +
> + if (!spin)
> + return -EINVAL;
> +
> + for (i = 0; i < num_configs; i++) {
> + param = pinconf_to_config_param(configs[i]);
> + arg = pinconf_to_config_argument(configs[i]);
> +
> + switch (param) {
> + case PIN_CONFIG_BIAS_DISABLE:
> + v &= ~(PAD_PULL_EN | PAD_PULLDOWN | PAD_PULLUP);
> + break;
> + case PIN_CONFIG_BIAS_PULL_DOWN:
> + v &= ~PAD_PULLDOWN;
> + v |= PAD_PULL_EN;
> + v |= FIELD_PREP(PAD_PULLDOWN, arg);
> + break;
> + case PIN_CONFIG_BIAS_PULL_UP:
> + v &= ~PAD_PULLUP;
> + v |= PAD_PULL_EN;
> + v |= FIELD_PREP(PAD_PULLUP, arg);
> + break;
> + case PIN_CONFIG_DRIVE_STRENGTH_UA:
> + flag |= ENABLE_DRV_STRENGTH;
> + drv_strength = arg;
> + break;
> + case PIN_CONFIG_INPUT_SCHMITT:
> + slew_rate = arg;
> + break;
> + case PIN_CONFIG_POWER_SOURCE:
> + voltage = arg;
> + break;
> + case PIN_CONFIG_SLEW_RATE:
> + flag |= ENABLE_SLEW_RATE;
> + break;
> + case PIN_CONFIG_K1_SLEW_RATE_ENABLE:
> + if (arg)
> + v |= PAD_SLEW_RATE_EN;
> + else
> + v &= ~PAD_SLEW_RATE_EN;
> + break;
> + case PIN_CONFIG_K1_STRONG_PULL_UP:
> + v &= ~PAD_STRONG_PULL;
> + v |= FIELD_PREP(PAD_STRONG_PULL, arg);
> + break;
> + default:
> + return -EINVAL;
> + }
> + }
> +
> + if (flag & ENABLE_DRV_STRENGTH) {
> + type = spacemit_to_pin_io_type(spin);
> +
> + /* fix external io type */
> + if (type == IO_TYPE_EXTERNAL) {
> + switch (voltage) {
> + case 1800:
> + type = IO_TYPE_1V8;
> + break;
> + case 3300:
> + type = IO_TYPE_3V3;
> + break;
> + default:
> + pr_err("pin(%d) lack power source\n", spin->pin);
> + return -EINVAL;
> + }
> + }
> +
> + val = spacemit_get_driver_strength(type, drv_strength);
> +
> + v &= ~PAD_DRIVE;
> + v |= FIELD_PREP(PAD_DRIVE, val);
> + }
> +
> + if (flag & ENABLE_SLEW_RATE) {
> + v &= ~PAD_SLEW_RATE;
> + v |= FIELD_PREP(PAD_SLEW_RATE, arg);
> + /* check, driver strength & slew rate */
> + if (flag & ENABLE_DRV_STRENGTH) {
> + if (slew_rate != FIELD_GET(PAD_SLEW_RATE, v))
> + pr_warn("%s: slew rate conflict with driver strength\n", __func__);
Should this return -EINVAL?
> + } else {
> + v &= ~PAD_SCHMITT;
> + v |= FIELD_PREP(PAD_SCHMITT, slew_rate);
> + }
> + }
> +
> + *value = v;
> +
> + return 0;
> +}
> +
> +static int spacemit_pin_set_config(struct spacemit_pinctrl *pctrl,
> + unsigned int pin,
> + u32 value)
> +{
> + const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> + void __iomem *reg;
> + unsigned long flags;
> + unsigned int mux;
> +
> + if (!pin)
> + return -EINVAL;
> +
> + reg = spacemit_pin_to_reg(pctrl, spin->pin);
> +
> + raw_spin_lock_irqsave(&pctrl->lock, flags);
> + mux = readl_relaxed(reg) & PAD_MUX;
> + writel_relaxed(mux | value, reg);
> + raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> +
> + return 0;
> +}
> +
> +static int spacemit_pinconf_set(struct pinctrl_dev *pctldev,
> + unsigned int pin, unsigned long *configs,
> + unsigned int num_configs)
> +{
> + struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> + const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> + u32 value;
> +
> + if (spacemit_pinconf_generate_config(spin, configs, num_configs, &value))
> + return -EINVAL;
> +
> + return spacemit_pin_set_config(pctrl, pin, value);
> +}
> +
> +static int spacemit_pinconf_group_set(struct pinctrl_dev *pctldev,
> + unsigned int gsel,
> + unsigned long *configs,
> + unsigned int num_configs)
> +{
> + struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> + const struct spacemit_pin *spin;
> + const struct group_desc *group;
> + u32 value;
> + int i;
> +
> + group = pinctrl_generic_get_group(pctldev, gsel);
> + if (!group)
> + return -EINVAL;
> +
> + spin = spacemit_get_pin(pctrl, group->grp.pins[0]);
> + if (spacemit_pinconf_generate_config(spin, configs, num_configs, &value))
> + return -EINVAL;
> +
> + for (i = 0; i < group->grp.npins; i++)
> + spacemit_pin_set_config(pctrl, group->grp.pins[i], value);
> +
> + return 0;
> +}
> +
> +static void spacemit_pinconf_dbg_show(struct pinctrl_dev *pctldev,
> + struct seq_file *seq, unsigned int pin)
> +{
> + struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> + const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> + enum spacemit_pin_io_type type = spacemit_to_pin_io_type(spin);
> + void __iomem *reg;
> +
> + reg = spacemit_pin_to_reg(pctrl, pin);
> + seq_printf(seq, " reg (0x%x), io (%d)\n", readl(reg), type);
> +}
> +
I think this is a duplicate of "spacemit_pctrl_dbg_show".
> +static const struct pinconf_ops spacemit_pinconf_ops = {
> + .pin_config_get = spacemit_pinconf_get,
> + .pin_config_set = spacemit_pinconf_set,
> + .pin_config_group_set = spacemit_pinconf_group_set,
> + .pin_config_dbg_show = spacemit_pinconf_dbg_show,
> + .is_generic = true,
> +};
> +
> +static int spacemit_pinctrl_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct device *dev = &pdev->dev;
> + struct spacemit_pinctrl *pctrl;
> + const struct spacemit_pinctrl_data *pctrl_data;
> + int ret;
> +
> + pctrl_data = device_get_match_data(dev);
> + if (!pctrl_data)
> + return -ENODEV;
> +
> + if (pctrl_data->npins == 0)
> + return dev_err_probe(dev, -EINVAL, "invalid pin data\n");
> +
> + pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL);
> + if (!pctrl)
> + return -ENOMEM;
> +
> + pctrl->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(pctrl->regs))
> + return PTR_ERR(pctrl->regs);
> +
> + pctrl->pdesc.name = dev_name(dev);
> + pctrl->pdesc.pins = pctrl_data->pins;
> + pctrl->pdesc.npins = pctrl_data->npins;
> + pctrl->pdesc.pctlops = &spacemit_pctrl_ops;
> + pctrl->pdesc.pmxops = &spacemit_pmx_ops;
> + pctrl->pdesc.confops = &spacemit_pinconf_ops;
> + pctrl->pdesc.num_custom_params = ARRAY_SIZE(spacemit_pinconf_custom_params);
> + pctrl->pdesc.custom_params = spacemit_pinconf_custom_params;
> + pctrl->pdesc.owner = THIS_MODULE;
> +
> + pctrl->data = pctrl_data;
> + pctrl->dev = dev;
> + raw_spin_lock_init(&pctrl->lock);
> + INIT_LIST_HEAD(&pctrl->gpiofuncs);
> + mutex_init(&pctrl->mutex);
> +
> + platform_set_drvdata(pdev, pctrl);
> +
> + ret = devm_pinctrl_register_and_init(dev, &pctrl->pdesc,
> + pctrl, &pctrl->pctl_dev);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "fail to register pinctrl driver\n");
> + ret = spacemit_add_gpio_func(np, pctrl);
> + if (ret < 0)
> + return dev_err_probe(dev, ret,
> + "fail to get gpio function\n");
> +
> + return pinctrl_enable(pctrl->pctl_dev);
> +}
> +
> +static const struct pinctrl_pin_desc k1_pin_desc[] = {
> + PINCTRL_PIN(GPIO_00, "GPIO_00"),
> + PINCTRL_PIN(GPIO_01, "GPIO_01"),
> + PINCTRL_PIN(GPIO_02, "GPIO_02"),
> + PINCTRL_PIN(GPIO_03, "GPIO_03"),
> + PINCTRL_PIN(GPIO_04, "GPIO_04"),
> + PINCTRL_PIN(GPIO_05, "GPIO_05"),
> + PINCTRL_PIN(GPIO_06, "GPIO_06"),
> + PINCTRL_PIN(GPIO_07, "GPIO_07"),
> + PINCTRL_PIN(GPIO_08, "GPIO_08"),
> + PINCTRL_PIN(GPIO_09, "GPIO_09"),
> + PINCTRL_PIN(GPIO_10, "GPIO_10"),
> + PINCTRL_PIN(GPIO_11, "GPIO_11"),
> + PINCTRL_PIN(GPIO_12, "GPIO_12"),
> + PINCTRL_PIN(GPIO_13, "GPIO_13"),
> + PINCTRL_PIN(GPIO_14, "GPIO_14"),
> + PINCTRL_PIN(GPIO_15, "GPIO_15"),
> + PINCTRL_PIN(GPIO_16, "GPIO_16"),
> + PINCTRL_PIN(GPIO_17, "GPIO_17"),
> + PINCTRL_PIN(GPIO_18, "GPIO_18"),
> + PINCTRL_PIN(GPIO_19, "GPIO_19"),
> + PINCTRL_PIN(GPIO_20, "GPIO_20"),
> + PINCTRL_PIN(GPIO_21, "GPIO_21"),
> + PINCTRL_PIN(GPIO_22, "GPIO_22"),
> + PINCTRL_PIN(GPIO_23, "GPIO_23"),
> + PINCTRL_PIN(GPIO_24, "GPIO_24"),
> + PINCTRL_PIN(GPIO_25, "GPIO_25"),
> + PINCTRL_PIN(GPIO_26, "GPIO_26"),
> + PINCTRL_PIN(GPIO_27, "GPIO_27"),
> + PINCTRL_PIN(GPIO_28, "GPIO_28"),
> + PINCTRL_PIN(GPIO_29, "GPIO_29"),
> + PINCTRL_PIN(GPIO_30, "GPIO_30"),
> + PINCTRL_PIN(GPIO_31, "GPIO_31"),
> + PINCTRL_PIN(GPIO_32, "GPIO_32"),
> + PINCTRL_PIN(GPIO_33, "GPIO_33"),
> + PINCTRL_PIN(GPIO_34, "GPIO_34"),
> + PINCTRL_PIN(GPIO_35, "GPIO_35"),
> + PINCTRL_PIN(GPIO_36, "GPIO_36"),
> + PINCTRL_PIN(GPIO_37, "GPIO_37"),
> + PINCTRL_PIN(GPIO_38, "GPIO_38"),
> + PINCTRL_PIN(GPIO_39, "GPIO_39"),
> + PINCTRL_PIN(GPIO_40, "GPIO_40"),
> + PINCTRL_PIN(GPIO_41, "GPIO_41"),
> + PINCTRL_PIN(GPIO_42, "GPIO_42"),
> + PINCTRL_PIN(GPIO_43, "GPIO_43"),
> + PINCTRL_PIN(GPIO_44, "GPIO_44"),
> + PINCTRL_PIN(GPIO_45, "GPIO_45"),
> + PINCTRL_PIN(GPIO_46, "GPIO_46"),
> + PINCTRL_PIN(GPIO_47, "GPIO_47"),
> + PINCTRL_PIN(GPIO_48, "GPIO_48"),
> + PINCTRL_PIN(GPIO_49, "GPIO_49"),
> + PINCTRL_PIN(GPIO_50, "GPIO_50"),
> + PINCTRL_PIN(GPIO_51, "GPIO_51"),
> + PINCTRL_PIN(GPIO_52, "GPIO_52"),
> + PINCTRL_PIN(GPIO_53, "GPIO_53"),
> + PINCTRL_PIN(GPIO_54, "GPIO_54"),
> + PINCTRL_PIN(GPIO_55, "GPIO_55"),
> + PINCTRL_PIN(GPIO_56, "GPIO_56"),
> + PINCTRL_PIN(GPIO_57, "GPIO_57"),
> + PINCTRL_PIN(GPIO_58, "GPIO_58"),
> + PINCTRL_PIN(GPIO_59, "GPIO_59"),
> + PINCTRL_PIN(GPIO_60, "GPIO_60"),
> + PINCTRL_PIN(GPIO_61, "GPIO_61"),
> + PINCTRL_PIN(GPIO_62, "GPIO_62"),
> + PINCTRL_PIN(GPIO_63, "GPIO_63"),
> + PINCTRL_PIN(GPIO_64, "GPIO_64"),
> + PINCTRL_PIN(GPIO_65, "GPIO_65"),
> + PINCTRL_PIN(GPIO_66, "GPIO_66"),
> + PINCTRL_PIN(GPIO_67, "GPIO_67"),
> + PINCTRL_PIN(GPIO_68, "GPIO_68"),
> + PINCTRL_PIN(GPIO_69, "GPIO_69"),
> + PINCTRL_PIN(GPIO_70, "GPIO_70/PRI_DTI"),
> + PINCTRL_PIN(GPIO_71, "GPIO_71/PRI_TMS"),
> + PINCTRL_PIN(GPIO_72, "GPIO_72/PRI_TCK"),
> + PINCTRL_PIN(GPIO_73, "GPIO_73/PRI_TDO"),
> + PINCTRL_PIN(GPIO_74, "GPIO_74"),
> + PINCTRL_PIN(GPIO_75, "GPIO_75"),
> + PINCTRL_PIN(GPIO_76, "GPIO_76"),
> + PINCTRL_PIN(GPIO_77, "GPIO_77"),
> + PINCTRL_PIN(GPIO_78, "GPIO_78"),
> + PINCTRL_PIN(GPIO_79, "GPIO_79"),
> + PINCTRL_PIN(GPIO_80, "GPIO_80"),
> + PINCTRL_PIN(GPIO_81, "GPIO_81"),
> + PINCTRL_PIN(GPIO_82, "GPIO_82"),
> + PINCTRL_PIN(GPIO_83, "GPIO_83"),
> + PINCTRL_PIN(GPIO_84, "GPIO_84"),
> + PINCTRL_PIN(GPIO_85, "GPIO_85"),
> + PINCTRL_PIN(GPIO_86, "GPIO_86"),
> + PINCTRL_PIN(GPIO_87, "GPIO_87"),
> + PINCTRL_PIN(GPIO_88, "GPIO_88"),
> + PINCTRL_PIN(GPIO_89, "GPIO_89"),
> + PINCTRL_PIN(GPIO_90, "GPIO_90"),
> + PINCTRL_PIN(GPIO_91, "GPIO_91"),
> + PINCTRL_PIN(GPIO_92, "GPIO_92"),
> + PINCTRL_PIN(GPIO_93, "GPIO_93/PWR_SCL"),
> + PINCTRL_PIN(GPIO_94, "GPIO_94/PWR_SDA"),
> + PINCTRL_PIN(GPIO_95, "GPIO_95/VCX0_EN"),
> + PINCTRL_PIN(GPIO_96, "GPIO_96/DVL0"),
> + PINCTRL_PIN(GPIO_97, "GPIO_97/DVL1"),
> + PINCTRL_PIN(GPIO_98, "GPIO_98/QSPI_DAT3"),
> + PINCTRL_PIN(GPIO_99, "GPIO_99/QSPI_DAT2"),
> + PINCTRL_PIN(GPIO_100, "GPIO_100/QSPI_DAT1"),
> + PINCTRL_PIN(GPIO_101, "GPIO_101/QSPI_DAT0"),
> + PINCTRL_PIN(GPIO_102, "GPIO_102/QSPI_CLK"),
> + PINCTRL_PIN(GPIO_103, "GPIO_103/QSPI_CSI"),
> + PINCTRL_PIN(GPIO_104, "GPIO_104/MMC1_DAT3"),
> + PINCTRL_PIN(GPIO_105, "GPIO_105/MMC1_DAT2"),
> + PINCTRL_PIN(GPIO_106, "GPIO_106/MMC1_DAT1"),
> + PINCTRL_PIN(GPIO_107, "GPIO_107/MMC1_DAT0"),
> + PINCTRL_PIN(GPIO_108, "GPIO_108/MMC1_CMD"),
> + PINCTRL_PIN(GPIO_109, "GPIO_109/MMC1_CLK"),
> + PINCTRL_PIN(GPIO_110, "GPIO_110"),
> + PINCTRL_PIN(GPIO_111, "GPIO_111"),
> + PINCTRL_PIN(GPIO_112, "GPIO_112"),
> + PINCTRL_PIN(GPIO_113, "GPIO_113"),
> + PINCTRL_PIN(GPIO_114, "GPIO_114"),
> + PINCTRL_PIN(GPIO_115, "GPIO_115"),
> + PINCTRL_PIN(GPIO_116, "GPIO_116"),
> + PINCTRL_PIN(GPIO_117, "GPIO_117"),
> + PINCTRL_PIN(GPIO_118, "GPIO_118"),
> + PINCTRL_PIN(GPIO_119, "GPIO_119"),
> + PINCTRL_PIN(GPIO_120, "GPIO_120"),
> + PINCTRL_PIN(GPIO_121, "GPIO_121"),
> + PINCTRL_PIN(GPIO_122, "GPIO_122"),
> + PINCTRL_PIN(GPIO_123, "GPIO_123"),
> + PINCTRL_PIN(GPIO_124, "GPIO_124"),
> + PINCTRL_PIN(GPIO_125, "GPIO_125"),
> + PINCTRL_PIN(GPIO_126, "GPIO_126"),
> + PINCTRL_PIN(GPIO_127, "GPIO_127"),
> +};
> +
> +static const struct spacemit_pin k1_pin_data[ARRAY_SIZE(k1_pin_desc)] = {
> + K1_FUNC_PIN(GPIO_00, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_01, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_02, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_03, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_04, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_05, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_06, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_07, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_08, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_09, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_10, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_11, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_12, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_13, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_14, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_15, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_16, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_17, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_18, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_19, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_20, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_21, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_22, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_23, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_24, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_25, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_26, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_27, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_28, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_29, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_30, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_31, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_32, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_33, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_34, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_35, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_36, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_37, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_38, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_39, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_40, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_41, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_42, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_43, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_44, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_45, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_46, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_47, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_48, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_49, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_50, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_51, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_52, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_53, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_54, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_55, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_56, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_57, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_58, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_59, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_60, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_61, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_62, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_63, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_64, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_65, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_66, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_67, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_68, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_69, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_70, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_71, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_72, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_73, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_74, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_75, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_76, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_77, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_78, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_79, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_80, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_81, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_82, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_83, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_84, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_85, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_86, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_87, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_88, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_89, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_90, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_91, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_92, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_93, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_94, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_95, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_96, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_97, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_98, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_99, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_100, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_101, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_102, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_103, IO_TYPE_EXTERNAL),
> + K1_FUNC_PIN(GPIO_104, IO_TYPE_3V3),
> + K1_FUNC_PIN(GPIO_105, IO_TYPE_3V3),
> + K1_FUNC_PIN(GPIO_106, IO_TYPE_3V3),
> + K1_FUNC_PIN(GPIO_107, IO_TYPE_3V3),
> + K1_FUNC_PIN(GPIO_108, IO_TYPE_3V3),
> + K1_FUNC_PIN(GPIO_109, IO_TYPE_3V3),
> + K1_FUNC_PIN(GPIO_110, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_111, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_112, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_113, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_114, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_115, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_116, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_117, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_118, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_119, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_120, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_121, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_122, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_123, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_124, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_125, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_126, IO_TYPE_1V8),
> + K1_FUNC_PIN(GPIO_127, IO_TYPE_1V8),
> +};
> +
> +static const struct spacemit_pinctrl_data k1_pinctrl_data = {
> + .pins = k1_pin_desc,
> + .data = k1_pin_data,
> + .npins = ARRAY_SIZE(k1_pin_desc),
> +};
> +
> +static const struct of_device_id k1_pinctrl_ids[] = {
> + { .compatible = "spacemit,k1-pinctrl", .data = &k1_pinctrl_data },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, k1_pinctrl_ids);
> +
> +static struct platform_driver k1_pinctrl_driver = {
> + .probe = spacemit_pinctrl_probe,
> + .driver = {
> + .name = "k1-pinctrl",
> + .suppress_bind_attrs = true,
> + .of_match_table = k1_pinctrl_ids,
> + },
> +};
> +module_platform_driver(k1_pinctrl_driver);
> +
> +MODULE_AUTHOR("Yixun Lan <dlan@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Pinctrl driver for the SpacemiT K1 SoC");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/pinctrl/spacemit/pinctrl-k1.h b/drivers/pinctrl/spacemit/pinctrl-k1.h
> new file mode 100644
> index 0000000000000..9d6589b626e9d
> --- /dev/null
> +++ b/drivers/pinctrl/spacemit/pinctrl-k1.h
> @@ -0,0 +1,36 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Copyright (c) 2024 Yixun Lan <dlan@xxxxxxxxxx> */
> +
> +#ifndef _PINCTRL_SPACEMIT_K1_H
> +#define _PINCTRL_SPACEMIT_K1_H
> +
> +#include <linux/bits.h>
> +#include <linux/bitfield.h>
> +#include <linux/device.h>
> +#include <linux/mutex.h>
> +#include <linux/spinlock.h>
> +#include <linux/platform_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinconf.h>
> +
> +enum spacemit_pin_io_type {
> + IO_TYPE_NONE = 0,
> + IO_TYPE_1V8,
> + IO_TYPE_3V3,
> + IO_TYPE_EXTERNAL,
> +};
> +
> +#define K1_PIN_IO_TYPE GENMASK(2, 1)
> +
> +#define K1_PIN_CAP_IO_TYPE(type) \
> + FIELD_PREP_CONST(K1_PIN_IO_TYPE, type)
> +#define K1_PIN_GET_IO_TYPE(val) \
> + FIELD_GET(K1_PIN_IO_TYPE, val)
> +
> +#define K1_FUNC_PIN(_id, _io) \
> + { \
> + .pin = (_id), \
> + .flags = (K1_PIN_CAP_IO_TYPE(_io)) \
> + }
> +
> +#endif /* _PINCTRL_SPACEMIT_K1_H */
>
> --
> 2.45.2
>
Re: [PATCH v2 2/4] pinctrl: spacemit: add support for SpacemiT K1 SoC
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v2 2/4] pinctrl: spacemit: add support for SpacemiT K1 SoC
- From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
- Date: Mon, 26 Aug 2024 16:16:25 +0800
- In-reply-to: <20240825-02-k1-pinctrl-v2-2-ddd38a345d12@gentoo.org>
- References: <20240825-02-k1-pinctrl-v2-0-ddd38a345d12@gentoo.org> <20240825-02-k1-pinctrl-v2-2-ddd38a345d12@gentoo.org>
- Follow-Ups:
- References:
- [PATCH v2 0/4] riscv: spacemit: add pinctrl support to K1 SoC
- From: Yixun Lan
- [PATCH v2 2/4] pinctrl: spacemit: add support for SpacemiT K1 SoC
- From: Yixun Lan
- [PATCH v2 0/4] riscv: spacemit: add pinctrl support to K1 SoC
- Prev by Date: Re: [PATCH v2 3/4] riscv: dts: spacemit: add pinctrl support for K1 SoC
- Next by Date: Re: [PATCH 1/4] gpio: ath79: order headers alphabetically
- Previous by thread: [PATCH v2 2/4] pinctrl: spacemit: add support for SpacemiT K1 SoC
- Next by thread: Re: [PATCH v2 2/4] pinctrl: spacemit: add support for SpacemiT K1 SoC
- Index(es):
 |