Re: [PATCH v1 08/10] arm64: dts: exynos: Add initial support for exynos8895 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/9/24 08:48, Krzysztof Kozlowski wrote:
> On 07/08/2024 13:20, Ivaylo Ivanov wrote:
>> On 8/7/24 12:20, Krzysztof Kozlowski wrote:
>>> On 07/08/2024 10:28, ivo.ivanov.ivanov1@xxxxxxxxx wrote:
>>>> From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
>>>>
>>>> Exynos 8895 SoC is an ARMv8 mobile SoC found in the Samsung Galaxy
>>>> S8 (dreamlte), S8 Plus (dream2lte), Note 8 (greatlte) and the Meizu
>>>> 15 Plus (m1891). Add minimal support for that SoC, including:
>>>>
>>>> - All 8 cores via PSCI
>>>> - ChipID
>>>> - Generic ARMV8 Timer
>>>> - Enumarate all pinctrl nodes
>>>>
>>>> Further platform support will be added over time.
>>>>
>>>> Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
>>>> ---
>>>>  .../boot/dts/exynos/exynos8895-pinctrl.dtsi   | 1378 +++++++++++++++++
>>>>  arch/arm64/boot/dts/exynos/exynos8895.dtsi    |  253 +++
>>>>  2 files changed, 1631 insertions(+)
>>>>  create mode 100644 arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
>>>>  create mode 100644 arch/arm64/boot/dts/exynos/exynos8895.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
>>>> new file mode 100644
>>>> index 000000000..1dcb61e2e
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
>>>> @@ -0,0 +1,1378 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Samsung's Exynos 8895 SoC pin-mux and pin-config device tree source
>>>> + *
>>>> + * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
>>>> + */
>>>> +
>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> +#include "exynos-pinctrl.h"
>>>> +
>>>> +&pinctrl_alive {
>>>> +	gpa0: gpa0 {
>>> I do not believe this was tested. See maintainer SoC profile for Samsung
>>> Exynos.
>>>
>>> Limited review follows due to lack of testing.
>>>
>>>
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
>>>> new file mode 100644
>>>> index 000000000..3ed381ee5
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
>>>> @@ -0,0 +1,253 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Samsung's Exynos 8895 SoC device tree source
>>>> + *
>>>> + * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
>>>> + */
>>>> +
>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> +
>>>> +/ {
>>>> +	compatible = "samsung,exynos8895";
>>>> +	#address-cells = <2>;
>>>> +	#size-cells = <1>;
>>>> +
>>>> +	interrupt-parent = <&gic>;
>>>> +
>>>> +	aliases {
>>>> +		pinctrl0 = &pinctrl_alive;
>>>> +		pinctrl1 = &pinctrl_abox;
>>>> +		pinctrl2 = &pinctrl_vts;
>>>> +		pinctrl3 = &pinctrl_fsys0;
>>>> +		pinctrl4 = &pinctrl_fsys1;
>>>> +		pinctrl5 = &pinctrl_busc;
>>>> +		pinctrl6 = &pinctrl_peric0;
>>>> +		pinctrl7 = &pinctrl_peric1;
>>>> +	};
>>>> +
>>>> +	arm-a53-pmu {
>>> Are there two pmus?
>> Hm. The Downstream kernel has them all under one node with compatible
>>
>> 'arm,armv8-pmuv3', same as with Exynos 7885. So it should have two PMUs,
>>
>> one for each cluster.
>>
>>
>> Considering the second cluster consists of Samsung's custom Mongoose M2
>>
>> cores, what would be the most adequate thing to do? Keep the first PMU as
>>
>> "arm,cortex-a53-pmu" and use the SW model "arm,armv8-pmuv3" for the
>>
>> second PMU? I doubt guessing if these mongoose cores are based on already
>>
>> existing cortex cores is a great idea.
> I was just wondering why there is only one and called a53. I am not sure
> what should be for the second, but rather not a software model.
>
> Best regards,
> Krzysztof
>
Well, as far as I can tell there are 3 options:

- use an already defined PMU model for another core (ex. A73)

- submit another patch to add a custom mongoose-specific PMU model

- omit the mongoose cores PMU entirely

My guess is that omitting it entirely with a comment that mentions the

issue will be good enough, at least for now. Is that OK for the v3?


Best regards,

Ivaylo





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux