On Fri, Aug 09, 2024 at 02:22:04AM GMT, Konrad Dybcio wrote: > From: Konrad Dybcio <quic_kdybcio@xxxxxxxxxxx> > > Remove the erroneus 0x100000 offset to prevent the boards from crashing > on pin state setting, as well as for the intended state changes to take > effect. > > Fixes: 05e4941d97ef ("pinctrl: qcom: Add X1E80100 pinctrl driver") > Signed-off-by: Konrad Dybcio <quic_kdybcio@xxxxxxxxxxx> Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx> Regards, Bjorn > --- > drivers/pinctrl/qcom/pinctrl-x1e80100.c | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/pinctrl/qcom/pinctrl-x1e80100.c b/drivers/pinctrl/qcom/pinctrl-x1e80100.c > index 6cd4d10e6fd6..65ed933f05ce 100644 > --- a/drivers/pinctrl/qcom/pinctrl-x1e80100.c > +++ b/drivers/pinctrl/qcom/pinctrl-x1e80100.c > @@ -1805,10 +1805,10 @@ static const struct msm_pingroup x1e80100_groups[] = { > [235] = PINGROUP(235, aon_cci, qdss_gpio, _, _, _, _, _, _, _), > [236] = PINGROUP(236, aon_cci, qdss_gpio, _, _, _, _, _, _, _), > [237] = PINGROUP(237, _, _, _, _, _, _, _, _, _), > - [238] = UFS_RESET(ufs_reset, 0x1f9000), > - [239] = SDC_QDSD_PINGROUP(sdc2_clk, 0x1f2000, 14, 6), > - [240] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x1f2000, 11, 3), > - [241] = SDC_QDSD_PINGROUP(sdc2_data, 0x1f2000, 9, 0), > + [238] = UFS_RESET(ufs_reset, 0xf9000), > + [239] = SDC_QDSD_PINGROUP(sdc2_clk, 0xf2000, 14, 6), > + [240] = SDC_QDSD_PINGROUP(sdc2_cmd, 0xf2000, 11, 3), > + [241] = SDC_QDSD_PINGROUP(sdc2_data, 0xf2000, 9, 0), > }; > > static const struct msm_gpio_wakeirq_map x1e80100_pdc_map[] = { > > --- > base-commit: 1e391b34f6aa043c7afa40a2103163a0ef06d179 > change-id: 20240809-topic-h_sdc-eb6edad718cd > > Best regards, > -- > Konrad Dybcio <quic_kdybcio@xxxxxxxxxxx> >