[PATCH v2 00/10] Add minimal Exynos8895 SoC and SM-G950F support

[Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>]

Hi folks,

This series adds initial SoC support for the Exynos 8895 SoC and also
initial board support for Samsung Galaxy S8 phone (SM-G950F), codenamed
dreamlte.

When sending out the V1 series it turned out that I had sendemail.from
enabled for some reason. I'm really sorry for the inconvenience caused by
that.

The Exynos 8895 SoC is also used in S8 Plus (dream2lte), Note 8 (greatlte)
and Meizu 15 Plus (m1891). Currently DT is added for the Exynos 8895 SoC
and dreamlte, but it should be really easy to adapt for the other devices
with the same SoC.

The support added in this series consists of:
* cpus
* pinctrl
* gpio
* simple-framebuffer
* pstore

This is enough to reach a minimal initramfs shell using an upstream kernel.
More platform support will be added in the future.

The preferred way to boot this device is by using a small shim bl called
uniLoader [1], which packages the mainline kernel and DT and jumps to
the kernel. This is done in order to work around some issues caused by
the stock, and non-replacable Samsung S-Boot bootloader. For example,
S-Boot leaves the decon trigger control unset, which causes the framebuffer
to not refresh. 

[1] https://github.com/ivoszbg/uniLoader

Changes in v2:
- No patch changes were made, only fixed the issues with my git send-email

Kind regards,

Ivaylo.

Ivaylo Ivanov (10):
  dt-bindings: arm: cpus: Add Samsung Mongoose M2
  dt-bindings: hwinfo: samsung,exynos-chipid: add exynos8895 compatible
  soc: samsung: exynos-chipid: add exynos8895 SoC support
  dt-bindings: pinctrl: samsung: Add compatible for Exynos8895 SoC
  pinctrl: samsung: Add exynos8895 SoC pinctrl configuration
  dt-bindings: pinctrl: samsung: add exynos8895-wakeup-eint compatible
  dt-bindings: soc: samsung: exynos-pmu: Add exynos8895 compatible
  arm64: dts: exynos: Add initial support for exynos8895 SoC
  dt-bindings: arm: samsung: Document dreamlte board binding
  arm64: dts: exynos: Add initial support for Samsung Galaxy S8

 .../devicetree/bindings/arm/cpus.yaml         |    1 +
 .../bindings/arm/samsung/samsung-boards.yaml  |    6 +
 .../hwinfo/samsung,exynos-chipid.yaml         |    1 +
 .../samsung,pinctrl-wakeup-interrupt.yaml     |    1 +
 .../bindings/pinctrl/samsung,pinctrl.yaml     |    1 +
 .../bindings/soc/samsung/exynos-pmu.yaml      |    1 +
 arch/arm64/boot/dts/exynos/Makefile           |    1 +
 .../boot/dts/exynos/exynos8895-dreamlte.dts   |  126 ++
 .../boot/dts/exynos/exynos8895-pinctrl.dtsi   | 1378 +++++++++++++++++
 arch/arm64/boot/dts/exynos/exynos8895.dtsi    |  253 +++
 .../pinctrl/samsung/pinctrl-exynos-arm64.c    |  137 ++
 drivers/pinctrl/samsung/pinctrl-exynos.h      |   10 +
 drivers/pinctrl/samsung/pinctrl-samsung.c     |    2 +
 drivers/pinctrl/samsung/pinctrl-samsung.h     |    1 +
 drivers/soc/samsung/exynos-chipid.c           |    1 +
 15 files changed, 1920 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos8895.dtsi

-- 
2.34.1