Re: [PATCH v3 2/9] pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions

[Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>]

Hi Paul,

On Tue, Jun 25, 2024 at 10:03 PM Paul Barker
<paul.barker.ct@xxxxxxxxxxxxxx> wrote:
> The variable naming in the various OEN functions has been confusing. We
> were passing the _pin & bit variables from rzg2l_pinctrl_pinconf_get()
> and rzg2l_pinctrl_pinconf_set() as the offset & pin argument to the
> oen_read() and oen_write() functions. This doesn't make sense, the first
> of these isn't actually an offset and the second is not needed for
> RZ/V2H but leads to confusion with the bit variable used within these
> functions.
>
> To tidy this up, instead pass the _pin variable directly to the
> oen_read() and oen_write() functions with consistent naming. Then
> rzg3s_read_oen() and rzg3s_write_oen() can use macros to get the port
> and pin numbers it needs.
>
> Instead of passing the pin capabilities into oen_read() and oen_write(),
> we can check that the pin supports OEN before calling these functions.
>
> Also, merge rzg3s_oen_is_supported() into rzg3s_pin_to_oen_bit() to give
> a single translation function which returns an error if the pin doesn't
> support OEN. While we're here, remove an unnecessary branch and clarify
> the variable naming. Lastly, check that we are not dealing with a
> dedicated pin before calling RZG2L_PIN_ID_TO_{PORT,PIN}().
>
> Signed-off-by: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
> Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> Changes v2->v3:
>   * Picked up Linus W's Acked-by tag.
>   * Skipped Geert's Reviewed-by tag as I've made a few changes here and
>     want another review.
>   * Check pin caps before calling oen_{read,write}() so we can drop the
>     caps argument to those functions.
>   * Simplify arguments to rzg3s_pin_to_oen_bit() and decode
>     pin_data/port/pin inside this function.
>   * Check for dedicated pin before calling RZG2L_PIN_ID_TO_{PORT,PIN}().

Thanks for the update!

> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c

> -static u32 rzg3s_oen_read(struct rzg2l_pinctrl *pctrl, u32 caps, u32 offset, u8 pin)
> +static int rzg3s_pin_to_oen_bit(struct rzg2l_pinctrl *pctrl, unsigned int _pin)
>  {
> +       u64 *pin_data = pctrl->desc.pins[_pin].drv_data;
>         u8 max_port = pctrl->data->hwcfg->oen_max_port;
>         u8 max_pin = pctrl->data->hwcfg->oen_max_pin;

As max_port and max_pin are used only once...

> -       u8 bit;
> +       u8 port, pin, bit;
>
> -       if (!rzg3s_oen_is_supported(caps, pin, max_pin))
> -               return 0;
> +       if (*pin_data & RZG2L_SINGLE_PIN)
> +               return -EINVAL;
>
> -       bit = rzg3s_pin_to_oen_bit(offset, pin, max_port);
> +       port = RZG2L_PIN_ID_TO_PORT(_pin);
> +       pin = RZG2L_PIN_ID_TO_PIN(_pin);
> +       if (pin > max_pin)

... I'd rather use their origins here...

> +               return -EINVAL;
> +
> +       bit = pin * 2;
> +       if (port == max_port)

... and here.
I can do that while applying.

> +               bit += 1;
> +
> +       return bit;
> +}

Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

I'll check with Linus whether I can still queue this in renesas-pinctrl
for v6.11.  As the first three patches of this series are a hard
dependency for the DTS parts, it would be good to get them in sooner
rather than later.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds