Re: [PATCH 4/4] pinctrl: renesas: rzg2l: Reorganize variable configuration macro

[claudiu beznea <claudiu.beznea@xxxxxxxxx>]

On 18.06.2024 20:48, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> 
> The `PIN_CFG_VARIABLE` macro did not indicate the capabilities of a pin
> but served as a flag indicating that the pins of a port have different
> capabilities.
> 
> To better reflect its purpose, move the `PIN_CFG_VARIABLE` macro beside
> `RZG2L_SINGLE_PIN` and rename it to `RZG2L_CFG_VARIABLE`. Additionally,
> introduce new macros for packing variable port configurations:
> 
> - `RZG2L_GPIO_PORT_PACK_VARIABLE(n, a)`: Combines `RZG2L_CFG_VARIABLE`
>   with `RZG2L_GPIO_PORT_PACK` to handle variable pin configurations
>   for a packed port.
> - `RZG2L_GPIO_PORT_SPARSE_PACK_VARIABLE(m, a)`: Combines
>   `RZG2L_CFG_VARIABLE` with `RZG2L_GPIO_PORT_SPARSE_PACK` to handle
>   variable pin configurations for a sparse port.
> 
> Due to the above change the configuration macros have been reorganized
> as follows:
> - Shift the bit positions of `PIN_CFG_NOGPIO_INT`, `PIN_CFG_NOD`,
>   `PIN_CFG_SMT`, `PIN_CFG_ELC`, and `PIN_CFG_IOLH_RZV2H` down by one
>   to accommodate the removal of `PIN_CFG_VARIABLE`.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Tested-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

> ---
>  drivers/pinctrl/renesas/pinctrl-rzg2l.c | 29 +++++++++++++++----------
>  1 file changed, 17 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> index 37a99d33400d..9a67de960470 100644
> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -57,14 +57,14 @@
>  #define PIN_CFG_IOLH_C			BIT(13)
>  #define PIN_CFG_SOFT_PS			BIT(14)
>  #define PIN_CFG_OEN			BIT(15)
> -#define PIN_CFG_VARIABLE		BIT(16)
> -#define PIN_CFG_NOGPIO_INT		BIT(17)
> -#define PIN_CFG_NOD			BIT(18)	/* N-ch Open Drain */
> -#define PIN_CFG_SMT			BIT(19)	/* Schmitt-trigger input control */
> -#define PIN_CFG_ELC			BIT(20)
> -#define PIN_CFG_IOLH_RZV2H		BIT(21)
> +#define PIN_CFG_NOGPIO_INT		BIT(16)
> +#define PIN_CFG_NOD			BIT(17)	/* N-ch Open Drain */
> +#define PIN_CFG_SMT			BIT(18)	/* Schmitt-trigger input control */
> +#define PIN_CFG_ELC			BIT(19)
> +#define PIN_CFG_IOLH_RZV2H		BIT(20)
>  
>  #define RZG2L_SINGLE_PIN		BIT_ULL(63)	/* Dedicated pin */
> +#define RZG2L_CFG_VARIABLE		BIT_ULL(62)	/* Variable cfg for port pins */
>  
>  #define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \
>  					(PIN_CFG_IOLH_##group | \
> @@ -100,12 +100,17 @@
>  #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)	(FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
>  						 FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
>  						 FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
> +#define RZG2L_GPIO_PORT_SPARSE_PACK_VARIABLE(m, a)	\
> +						(RZG2L_CFG_VARIABLE | \
> +						 RZG2L_GPIO_PORT_SPARSE_PACK(m, a, 0))
>  
>  /*
>   * n indicates number of pins in the port, a is the register index
>   * and f is pin configuration capabilities supported.
>   */
>  #define RZG2L_GPIO_PORT_PACK(n, a, f)	RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
> +#define RZG2L_GPIO_PORT_PACK_VARIABLE(n, a)	(RZG2L_CFG_VARIABLE | \
> +						 RZG2L_GPIO_PORT_PACK(n, a, 0))
>  
>  #define RZG2L_SINGLE_PIN_INDEX_MASK	GENMASK_ULL(62, 56)
>  #define RZG2L_SINGLE_PIN_BITS_MASK	GENMASK_ULL(55, 53)
> @@ -371,7 +376,7 @@ static u64 rzg2l_pinctrl_get_variable_pin_cfg(struct rzg2l_pinctrl *pctrl,
>  
>  		if (FIELD_GET(VARIABLE_PIN_CFG_PORT_MASK, cfg) == port &&
>  		    FIELD_GET(VARIABLE_PIN_CFG_PIN_MASK, cfg) == pin)
> -			return (pincfg & ~PIN_CFG_VARIABLE) | FIELD_GET(PIN_CFG_MASK, cfg);
> +			return (pincfg & ~RZG2L_CFG_VARIABLE) | FIELD_GET(PIN_CFG_MASK, cfg);
>  	}
>  
>  	return 0;
> @@ -1835,13 +1840,13 @@ static const u64 r9a07g043_gpio_configs[] = {
>  	RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x06, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
>  				    PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
>  				    PIN_CFG_IEN | PIN_CFG_NOGPIO_INT),			/* P19 */
> -	RZG2L_GPIO_PORT_PACK(8, 0x07, PIN_CFG_VARIABLE),				/* P20 */
> +	RZG2L_GPIO_PORT_PACK_VARIABLE(8, 0x07),						/* P20 */
>  	RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x08, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
>  				    PIN_CFG_IEN | PIN_CFG_NOGPIO_INT),			/* P21 */
>  	RZG2L_GPIO_PORT_PACK(4, 0x09, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
>  			     PIN_CFG_IEN | PIN_CFG_NOGPIO_INT),				/* P22 */
> -	RZG2L_GPIO_PORT_SPARSE_PACK(0x3e, 0x0a, PIN_CFG_VARIABLE),			/* P23 */
> -	RZG2L_GPIO_PORT_PACK(6, 0x0b, PIN_CFG_VARIABLE),				/* P24 */
> +	RZG2L_GPIO_PORT_SPARSE_PACK_VARIABLE(0x3e, 0x0a),				/* P23 */
> +	RZG2L_GPIO_PORT_PACK_VARIABLE(6, 0x0b),						/* P24 */
>  	RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x0c, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_FILONOFF |
>  				    PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
>  				    PIN_CFG_NOGPIO_INT),				/* P25 */
> @@ -1913,7 +1918,7 @@ static const u64 r9a09g057_gpio_configs[] = {
>  				      PIN_CFG_ELC),		/* P8 */
>  	RZG2L_GPIO_PORT_PACK(8, 0x29, RZV2H_MPXED_PIN_FUNCS),	/* P9 */
>  	RZG2L_GPIO_PORT_PACK(8, 0x2a, RZV2H_MPXED_PIN_FUNCS),	/* PA */
> -	RZG2L_GPIO_PORT_PACK(6, 0x2b, PIN_CFG_VARIABLE),	/* PB */
> +	RZG2L_GPIO_PORT_PACK_VARIABLE(6, 0x2b),			/* PB */
>  };
>  
>  static const struct {
> @@ -2637,7 +2642,7 @@ static int rzg2l_pinctrl_register(struct rzg2l_pinctrl *pctrl)
>  		if (i && !(i % RZG2L_PINS_PER_PORT))
>  			j++;
>  		pin_data[i] = pctrl->data->port_pin_configs[j];
> -		if (pin_data[i] & PIN_CFG_VARIABLE)
> +		if (pin_data[i] & RZG2L_CFG_VARIABLE)
>  			pin_data[i] = rzg2l_pinctrl_get_variable_pin_cfg(pctrl,
>  									 pin_data[i],
>  									 j,