Re: [PATCH v2 11/14] dt-bindings: mfd: pm8008: rework binding

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

On Wed, May 29, 2024 at 06:29:55PM +0200, Johan Hovold wrote:
> Rework the pm8008 binding by dropping internal details like register
> offsets and interrupts and by adding the missing regulator and
> temperature alarm properties.
> 
> Note that child nodes are still used for pinctrl and regulator
> configuration.
> 
> Also note that the pinctrl state definition will be extended later and
> could eventually also be shared with other PMICs (e.g. by breaking out
> bits of qcom,pmic-gpio.yaml).

Obviously we want to adapt this style of bindings for the other PMICs
too. My main concern here are PMICs which have two kinds of controlled
pins: GPIOs and MPPs. With the existing bindings style those are
declared as two subdevices. What would be your suggested way to support
MPPs with the proposed kind of bindings?

> 
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/mfd/qcom,pm8008.yaml  | 149 +++++++++++-------
>  1 file changed, 90 insertions(+), 59 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> index d71657f488db..ccf472e7f552 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> @@ -27,103 +27,134 @@ properties:
>    reset-gpios:
>      maxItems: 1
>  
> -  "#interrupt-cells":
> +  vdd-l1-l2-supply: true
> +  vdd-l3-l4-supply: true
> +  vdd-l5-supply: true
> +  vdd-l6-supply: true
> +  vdd-l7-supply: true
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
>      const: 2
>  
> -    description: |
> -      The first cell is the IRQ number, the second cell is the IRQ trigger
> -      flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h.
> +  gpio-ranges:
> +    maxItems: 1
>  
>    interrupt-controller: true
>  
> -  "#address-cells":
> -    const: 1
> +  "#interrupt-cells":
> +    const: 2
>  
> -  "#size-cells":
> +  "#thermal-sensor-cells":
>      const: 0
>  
> -patternProperties:
> -  "^gpio@[0-9a-f]+$":
> +  pinctrl:
>      type: object
> +    additionalProperties: false
> +    patternProperties:
> +      "-state$":
> +        type: object
> +        $ref: "#/$defs/qcom-pm8008-pinctrl-state"
> +        unevaluatedProperties: false
>  
> -    description: |
> -      The GPIO peripheral. This node may be specified twice, one for each GPIO.
> -
> -    properties:
> -      compatible:
> -        items:
> -          - const: qcom,pm8008-gpio
> -          - const: qcom,spmi-gpio
> +  regulators:
> +    type: object
> +    additionalProperties: false
> +    patternProperties:
> +      "^ldo[1-7]$":
> +        type: object
> +        $ref: /schemas/regulator/regulator.yaml#
> +        unevaluatedProperties: false
>  
> -      reg:
> -        description: Peripheral address of one of the two GPIO peripherals.
> -        maxItems: 1
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - vdd-l1-l2-supply
> +  - vdd-l3-l4-supply
> +  - vdd-l5-supply
> +  - vdd-l6-supply
> +  - vdd-l7-supply
> +  - gpio-controller
> +  - "#gpio-cells"
> +  - gpio-ranges
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +  - "#thermal-sensor-cells"
>  
> -      gpio-controller: true
> +additionalProperties: false
>  
> -      gpio-ranges:
> -        maxItems: 1
> +$defs:
> +  qcom-pm8008-pinctrl-state:
> +    type: object
>  
> -      interrupt-controller: true
> +    allOf:
> +      - $ref: /schemas/pinctrl/pinmux-node.yaml
> +      - $ref: /schemas/pinctrl/pincfg-node.yaml
>  
> -      "#interrupt-cells":
> -        const: 2
> +    properties:
> +      pins:
> +        items:
> +          pattern: "^gpio[12]$"
>  
> -      "#gpio-cells":
> -        const: 2
> +      function:
> +        items:
> +          - enum:
> +              - normal
>  
>      required:
> -      - compatible
> -      - reg
> -      - gpio-controller
> -      - interrupt-controller
> -      - "#gpio-cells"
> -      - gpio-ranges
> -      - "#interrupt-cells"
> +      - pins
> +      - function
>  
>      additionalProperties: false
>  
> -required:
> -  - compatible
> -  - reg
> -  - interrupts
> -  - "#address-cells"
> -  - "#size-cells"
> -  - "#interrupt-cells"
> -
> -additionalProperties: false
> -
>  examples:
>    - |
>      #include <dt-bindings/gpio/gpio.h>
> -    #include <dt-bindings/mfd/qcom-pm8008.h>
>      #include <dt-bindings/interrupt-controller/irq.h>
>  
>      i2c {
>        #address-cells = <1>;
>        #size-cells = <0>;
>  
> -      pmic@8 {
> +      pm8008: pmic@8 {
>          compatible = "qcom,pm8008";
>          reg = <0x8>;
> -        #address-cells = <1>;
> -        #size-cells = <0>;
> -        interrupt-controller;
> -        #interrupt-cells = <2>;
>  
>          interrupt-parent = <&tlmm>;
>          interrupts = <32 IRQ_TYPE_EDGE_RISING>;
>  
>          reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
>  
> -        pm8008_gpios: gpio@c000 {
> -          compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
> -          reg = <0xc000>;
> -          gpio-controller;
> -          gpio-ranges = <&pm8008_gpios 0 0 2>;
> -          #gpio-cells = <2>;
> -          interrupt-controller;
> -          #interrupt-cells = <2>;
> +        vdd-l1-l2-supply = <&vreg_s8b_1p2>;
> +        vdd-l3-l4-supply = <&vreg_s1b_1p8>;
> +        vdd-l5-supply = <&vreg_bob>;
> +        vdd-l6-supply = <&vreg_bob>;
> +        vdd-l7-supply = <&vreg_bob>;
> +
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        gpio-ranges = <&pm8008 0 0 2>;
> +
> +        interrupt-controller;
> +        #interrupt-cells = <2>;
> +
> +        #thermal-sensor-cells = <0>;
> +
> +        pinctrl {
> +          gpio-keys-state {
> +            pins = "gpio1";
> +            function = "normal";
> +          };
> +        };
> +
> +        regulators {
> +          ldo1 {
> +            regulator-name = "vreg_l1";
> +            regulator-min-microvolt = <950000>;
> +            regulator-max-microvolt = <1300000>;
> +          };
>          };
>        };
>      };
> -- 
> 2.44.1
> 

-- 
With best wishes
Dmitry