Re: [PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

On Mon, Nov 30, 2015 at 02:09:14AM +0800, Vishnu Patekar wrote:
> >> +                     reg = <0x01c20800 0x400>;
> >> +                     clocks = <&osc24M>;
> >> +                     gpio-controller;
> >> +                     interrupt-controller;
> >> +                     #interrupt-cells = <3>;
> >> +                     #gpio-cells = <3>;
> >> +
> >> +                     i2c0_pins_a: i2c0@0 {
> >> +                             allwinner,pins = "PH0", "PH1";
> >> +                             allwinner,function = "i2c0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     i2c1_pins_a: i2c1@0 {
> >> +                             allwinner,pins = "PH2", "PH3";
> >> +                             allwinner,function = "i2c1";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     i2c2_pins_a: i2c2@0 {
> >> +                             allwinner,pins = "PH4", "PH5";
> >> +                             allwinner,function = "i2c2";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     mmc0_pins_a: mmc0@0 {
> >> +                             allwinner,pins = "PF0", "PF1", "PF2",
> >> +                                              "PF3", "PF4", "PF5";
> >> +                             allwinner,function = "mmc0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     mmc1_pins_a: mmc1@0 {
> >> +                             allwinner,pins = "PG0", "PG1", "PG2",
> >> +                                              "PG3", "PG4", "PG5";
> >> +                             allwinner,function = "mmc1";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     mmc2_8bit_pins: mmc2_8bit {
> >> +                             allwinner,pins = "PC5", "PC6", "PC8",
> >> +                                              "PC9", "PC10", "PC11",
> >> +                                              "PC12", "PC13", "PC14",
> >> +                                              "PC15";
> >> +                             allwinner,function = "mmc2";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     uart0_pins_a: uart0@0 {
> >> +                             allwinner,pins = "PF2", "PF4";
> >> +                             allwinner,function = "uart0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >> +
> >> +                     uart0_pins_b: uart0@1 {
> >> +                             allwinner,pins = "PB9", "PB10";
> >> +                             allwinner,function = "uart0";
> >> +                             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> +                             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> +                     };
> >
> > Are you going to use all these options?
>
> Not, only uart0_pins_a and uart0_pins_b and mmc0_pins_a will be used for now.
> As, these are not enabled, I don't see any harm in keeping those here.

It bloats the DT for no particular reason.

> Let me know in case you want to remove, I'll do it.

Yes, please.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux