Re: [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Andrew F. Davis <afd@xxxxxx> [151116 08:39]:
> On 11/13/2015 08:47 AM, Tony Lindgren wrote:
> >* Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> [151112 20:55]:
> >>Hello Tony,
> >>
> >>This series converts all the remaining OMAP boards that didn't use the
> >>IOPAD macros to specify the padconf register addresses. The only board
> >>that I left was arch/arm/boot/dts/am335x-boneblack.dts because Andrew
> >>already posted a patch for that DTS [0].
> >>
> >>I built tested all the DTBs that are build by omap2plus_defconfig and
> >>the md5 checksum was the same before and after the patches so there's
> >>no functional change and is only to make the DTS more readable.
> >
> >Yes great. Being able to compare the register against the documentation
> >helps quite a bit. I plan on applying this series before anything else
> >after -rc1 as it may require other patches to be rebased.
> >
> >>Patch #1 should be acked by the pinctrl maintainer and picked through
> >>the linux-omap tree to maintain bisectability.
> >>
> >>[0]: https://lkml.org/lkml/2015/10/24/114
> >
> 
> v3 of my little contribution also out when you pull:
> https://lkml.org/lkml/2015/11/13/480

Applying that one too into omap-for-v4.5/dt thanks.

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux