Re: [PATCH v2 6/7] Documentation: Rename gpio controller name from cygnus to iproc

[Rob Herring <robh@xxxxxxxxxx>]

On Thu, Nov 19, 2015 at 09:22:18AM +0530, Pramod Kumar wrote:
> Renamed gpio controller's driver name from cygnus to iproc to make it
> more generic so that all iProc based SoCs having the same gpio controller
> could use this.
> 
> Signed-off-by: Pramod Kumar <pramodku@xxxxxxxxxxxx>
> Reviewed-by: Ray Jui <rjui@xxxxxxxxxxxx>
> Reviewed-by: Scott Branden <sbranden@xxxxxxxxxxxx>

Where's my ack?

> ---
>  .../bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt}    | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>  rename Documentation/devicetree/bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt} (97%)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> similarity index 97%
> rename from Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> rename to Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> index 8b1e5d1..e427792 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> @@ -1,4 +1,4 @@
> -Broadcom Cygnus GPIO/PINCONF Controller
> +Broadcom iProc GPIO/PINCONF Controller
>  
>  Required properties:
>  
> @@ -7,7 +7,7 @@ Required properties:
>      "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
>  
>  - reg:
> -    Define the base and range of the I/O address space that contains the Cygnus
> +    Define the base and range of the I/O address space that contains SoC
>  GPIO/PINCONF controller registers
>  
>  - ngpios:
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html