Re: [RFC 3/3] ARM: e3xx: Add header file for pinctrl constants

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Friday 06 November 2015 09:55:28 Moritz Fischer wrote:
> On Fri, Nov 6, 2015 at 8:42 AM, Arnd Bergmann <arnd@xxxxxxxx> wrote:
> > On Friday 06 November 2015 08:01:25 Moritz Fischer wrote:
> >> pins = E31X_TX_BANDSEL_2;
> >> output-low;
> >>
> >> in one .dts, while having something like
> >>
> >> pins = E33X_TX_BANDSEL_2
> >> output low;
> >>
> >> in the second dts
> >
> > That doesn't seem helpful though, because the assignment of the
> > pins is not hidden from the source file that should be documenting
> > it: if someone wants to know how the pins are muxed, they now have
> > to cross-reference the dts file with the header. If you just put the
> > pin number directly into the dts, it becomes completely clear
> > what the setting is.
> 
> Just to clarify, you're suggesting using "DB_0" etc in the dts file?
> At that point
> the name becomes kinda useless. I found the PINCTRL_PIN_ANON macro,
> but haven't found any use throughout the tree, is using it discouraged?

I don't know if that is the best approach, but it's better than using
macros here. You should only add a header file with macros if you
absolutely have to define a common namespace between the driver and the
dts files, but you don't do that here: the header file is only used
in one place.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux