Hello, While working on regulators, GPIOs and DT I noticed that many of our DT source files incorrectly describe fixed regulators. The common error patterns are - Usage of the undefined (and never parsed) enable-active-low property - Usage of the enable-active-high property without specifying an enable GPIO - Typos in the enabl GPIO property name (gpios instead of gpio) - Mismatch between the enable-active-high property (or the lack thereof) and the enable GPIO flags This patch series fixes those issues in all the DT sources after locating the errors using the following script. ------------------------------------------------------------------------------ #!/bin/sh echo $1 cat $1 | awk ' BEGIN { open_drain = 0; active_high = 0; gpio = 0; flags = 0; } match($0, /([a-zA-Z0-9@_-]*) {/, ary) { name = ary[1]; } /compatible.*"regulator-fixed"/ { found = 1; } /enable-active-high/ { active_high = 1; } /gpio-open-drain/ { open_drain = 1; } match($0, /gpio += <.* ([^ ]*)>/, ary) { gpio = 1; flags = ary[1]; if (flags == 0) flags = "GPIO_ACTIVE_HIGH"; } /}/ { if (found) { if (gpio) { print "\t" name ": active high " active_high " " flags " open drain " open_drain; if ((active_high && flags == "GPIO_ACTIVE_LOW") || (!active_high && flags == "GPIO_ACTIVE_HIGH")) print "WARNING: enable-active-high and flags do not match" } else { if (active_high) print "WARNING: active high without GPIO" if (open_drain) print "WARNING: open drain without GPIO" } } gpio = 0; found = 0; active_high = 0; open_drain = 0; flags = 0; } ' ------------------------------------------------------------------------------ All patches except for the ones touching omap3-beagle-xm and omap3-overo-base are untested as I lack test hardware. As there's no dependency between the patches touching different source files the appropriate maintainers could take their share of the patches in their tree. Alternatively I could send a single pull request after collecting all acks but that might be more complex. Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-omap@xxxxxxxxxxxxxxx Cc: linux-samsung-soc@xxxxxxxxxxxxxxx Cc: linux-tegra@xxxxxxxxxxxxxxx Cc: linux-gpio@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: Benoit Cousson <bcousson@xxxxxxxxxxxx> Cc: Tony Lindgren <tony@xxxxxxxxxxx> Cc: Jason Cooper <jason@xxxxxxxxxxxxxx> Cc: Andrew Lunn <andrew@xxxxxxx> Cc: Gregory Clement <gregory.clement@xxxxxxxxxxxxxxxxxx> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> Cc: Kukjin Kim <kgene@xxxxxxxxxx> Cc: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> Cc: Shawn Guo <shawnguo@xxxxxxxxxx> Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx> Cc: Stephen Warren <swarren@xxxxxxxxxxxxx> Cc: Thierry Reding <thierry.reding@xxxxxxxxx> Cc: Alexandre Courbot <gnurou@xxxxxxxxx> Cc: Liam Girdwood <lgirdwood@xxxxxxxxx> Cc: Mark Brown <broonie@xxxxxxxxxx> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> Laurent Pinchart (37): ARM: dts: am437x-gp-evm: Remove unneeded regulator property ARM: dts: am43xx-epos-evm: Remove unneeded regulator property ARM: mvebu: Armada 388 GP: Remove unneeded regulator property ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property ARM: dts: s5pv210-aquila: Fix typo in regulator enable GPIO property ARM: dts: s5pv210-goni: Fix typo in regulator enable GPIO property ARM: dts: omap3-evm: Remove invalid enable-active-low regulator property ARM: dts: omap3-sb-t35: Remove invalid enable-active-low regulator property ARM: dts: omap3-tao3530: Remove invalid enable-active-low regulator property ARM: dts: imx6qdl-tx6: Fix regulator enable GPIO polarity ARM: dts: dove-cm-a510: Fix regulator enable GPIO polarity ARM: dts: dove-sbc-a510: Fix regulator enable GPIO polarity ARM: dts: exynos5250-arndale: Fix regulator enable GPIO polarity ARM: dts: imx23-evk: Fix regulator enable GPIO polarity ARM: dts: imx23-stmp378x_devb: Fix regulator enable GPIO polarity ARM: dts: imx25-pdk: Fix regulator enable GPIO polarity ARM: dts: imx28-cfa10036: Fix regulator enable GPIO polarity ARM: dts: imx28-evk: Fix regulator enable GPIO polarity ARM: dts: imx28-m28cu3: Fix regulator enable GPIO polarity ARM: dts: imx28-m28evk: Fix regulator enable GPIO polarity ARM: dts: imx28-sps1: Fix regulator enable GPIO polarity ARM: dts: imx28-tx28: Fix regulator enable GPIO polarity ARM: dts: imx53-m53evk: Fix regulator enable GPIO polarity ARM: dts: imx53-mba53: Fix regulator enable GPIO polarity ARM: dts: imx53-tx53: Fix regulator enable GPIO polarity ARM: dts: imx6q-dmo-edmqmx6: Fix regulator enable GPIO polarity ARM: dts: kirkwood-blackarmor-nas220: Fix regulator enable GPIO polarity ARM: dts: omap4-duovero: Fix regulator enable GPIO polarity ARM: dts: kirkwood-nsa3x0-common: Fix regulator enable GPIO polarity ARM: dts: omap3-beagle-xm: Fix regulator enable GPIO polarity ARM: dts: omap3-beagle: Fix regulator enable GPIO polarity ARM: dts: omap3-overo-base: Fix regulator enable GPIO polarity ARM: dts: omap3-tao3530: Fix regulator enable GPIO polarity ARM: dts: tegra20-harmony: Fix regulator enable GPIO polarity ARM: dts: tegra20-iris-512: Fix regulator enable GPIO polarity ARM: dts: tegra20-seaboard: Fix regulator enable GPIO polarity ARM: dts: tegra20-ventana: Fix regulator enable GPIO polarity arch/arm/boot/dts/am437x-gp-evm.dts | 1 - arch/arm/boot/dts/am43x-epos-evm.dts | 1 - arch/arm/boot/dts/armada-388-gp.dts | 2 -- arch/arm/boot/dts/dove-cm-a510.dtsi | 2 +- arch/arm/boot/dts/dove-sbc-a510.dts | 4 ++-- arch/arm/boot/dts/exynos5250-arndale.dts | 2 +- arch/arm/boot/dts/imx23-evk.dts | 3 ++- arch/arm/boot/dts/imx23-stmp378x_devb.dts | 3 ++- arch/arm/boot/dts/imx25-pdk.dts | 2 +- arch/arm/boot/dts/imx28-cfa10036.dts | 2 +- arch/arm/boot/dts/imx28-evk.dts | 4 ++-- arch/arm/boot/dts/imx28-m28cu3.dts | 4 ++-- arch/arm/boot/dts/imx28-m28evk.dts | 6 +++--- arch/arm/boot/dts/imx28-sps1.dts | 2 +- arch/arm/boot/dts/imx28-tx28.dts | 2 +- arch/arm/boot/dts/imx53-m53evk.dts | 2 +- arch/arm/boot/dts/imx53-mba53.dts | 2 +- arch/arm/boot/dts/imx53-tx53.dtsi | 2 +- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 3 +-- arch/arm/boot/dts/imx6sx-sdb.dtsi | 2 +- arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts | 4 ++-- arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi | 2 +- arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +- arch/arm/boot/dts/omap3-beagle.dts | 2 +- arch/arm/boot/dts/omap3-evm-common.dtsi | 1 - arch/arm/boot/dts/omap3-overo-base.dtsi | 4 ++-- arch/arm/boot/dts/omap3-sb-t35.dtsi | 1 - arch/arm/boot/dts/omap3-tao3530.dtsi | 3 +-- arch/arm/boot/dts/omap4-duovero.dtsi | 2 +- arch/arm/boot/dts/s5pv210-aquila.dts | 2 +- arch/arm/boot/dts/s5pv210-goni.dts | 4 ++-- arch/arm/boot/dts/tegra20-harmony.dts | 2 +- arch/arm/boot/dts/tegra20-iris-512.dts | 2 +- arch/arm/boot/dts/tegra20-seaboard.dts | 2 +- arch/arm/boot/dts/tegra20-ventana.dts | 2 +- 36 files changed, 41 insertions(+), 47 deletions(-) -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html