Re: [PATCH v2 5/6] arm64: dts: berlin4ct: add the pinctrl node

[Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>]

Jisheng,

On Mon, Sep 21, 2015 at 06:04:19PM +0800, Jisheng Zhang wrote:
> Add the avio, soc, sm pinctrl nodes for Marvell berlin4ct SoC.
> 
> Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> index a3b5f1d..c374f1d 100644
> --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> @@ -225,6 +225,16 @@
>  			};
>  		};
>  
> +		soc_pinctrl: pinctrl@ea8000 {

We tend to use "pin-controller@" instead of "pinctrl@" in Berlin device
trees.

> +			compatible = "marvell,berlin4ct-soc-pinctrl";
> +			reg = <0xea8000 0x14>;
> +		};
> +
> +		avio_pinctrl: pinctrl@ea8400 {

Ditto.

> +			compatible = "marvell,berlin4ct-avio-pinctrl";
> +			reg = <0xea8400 0x8>;
> +		};
> +
>  		apb@fc0000 {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;
> @@ -280,5 +290,10 @@
>  				status = "disabled";
>  			};
>  		};
> +
> +		sm_pinctrl: pinctrl@fe2200 {

Ditto.

> +			compatible = "marvell,berlin4ct-sm-pinctrl";
> +			reg = <0xfe2200 0xc>;
> +		};
>  	};
>  };

Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html