Remove incorrect can2-3v3 fixed regulator, imx7d-sdb doesn't have a dedicated can2 fixed regulator instead it shares PERI_3V3 fixed regulator (RT8070ZS) which is enabled by default (hardwired) from pmic pfuze3000 NVCC_3V3 power rail. Signed-off-by: Adrian Alonso <aalonso@xxxxxxxxxxxxx> --- Changes for V7: New patch in series Changes for V8: Resend arch/arm/boot/dts/imx7d-sdb.dts | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 432aaf5..88308f3 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -78,16 +78,7 @@ enable-active-high; }; - reg_can2_3v3: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "can2-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; - - reg_vref_1v8: regulator@3 { + reg_vref_1v8: regulator@2 { compatible = "regulator-fixed"; reg = <3>; regulator-name = "vref-1v8"; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html