On Fri, Sep 25, 2015 at 04:05:58PM -0500, Adrian Alonso wrote: > Add imx7d-sdb iomuxc-lpsr hoggrp-2 default pads settings > > Signed-off-by: Adrian Alonso <aalonso@xxxxxxxxxxxxx> Looked at this patch again, and please see comments below. > --- > Changes for V2: Resend > Changes for V3: Resend > Changes for V4: Resend > Changes for V5: Resend > Changes for V6: > - Add wdog pinctrl group, add comments for hog2 group gpios > > arch/arm/boot/dts/imx7d-sdb.dts | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts > index 8059458..2da704a 100644 > --- a/arch/arm/boot/dts/imx7d-sdb.dts > +++ b/arch/arm/boot/dts/imx7d-sdb.dts > @@ -419,3 +419,23 @@ > > }; > }; > + > +&iomuxc_lpsr { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog_2>; > + > + imx7d-sdb { > + pinctrl_hog_2: hoggrp-2 { > + fsl,pins = < > + MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* usb_otg1_pwr */ Shouldn't this be handled by a pinctrl of regulator@0 ... > + MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x59 /* sensor_int_b */ ... and this by a pinctrl of regulator@2? > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 > + >; > + }; Add this only when you have a user for it. Shawn > + }; > +}; > -- > 2.1.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html