On Fri, Sep 25, 2015 at 12:47:26PM +0200, Markus Pargmann wrote: > On Thu, Sep 24, 2015 at 03:54:00PM -0500, Adrian Alonso wrote: > > Allow mux_reg offset zero to be a valid pin_id, on imx7d > > mux_conf reg offset is zero for iomuxc-lspr controller > > > > Signed-off-by: Adrian Alonso <aalonso@xxxxxxxxxxxxx> > > --- > > Changes for V2: Resend > > Changes for V3: Resend > > Changes for V4: Simplify pin_id assigment when ZERO_OFFSET_VALID is set > > Changes for V5: > > - Drop patch pinctrl: freescale: imx: add ZERO_OFFSET_VALID flag > > - Allow mux_reg ZERO OFFSET as pin_id > > > > drivers/pinctrl/freescale/pinctrl-imx.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c > > index b9c6deb..23348d8 100644 > > --- a/drivers/pinctrl/freescale/pinctrl-imx.c > > +++ b/drivers/pinctrl/freescale/pinctrl-imx.c > > @@ -550,7 +550,7 @@ static int imx_pinctrl_parse_groups(struct device_node *np, > > conf_reg = -1; > > } > > > > - pin_id = mux_reg ? mux_reg / 4 : conf_reg / 4; > > + pin_id = (mux_reg != -1) ? mux_reg / 4 : conf_reg / 4; > > This will break compatibility with imx35 and imx25 pinctrl drivers. They > have definitions where mux_reg can be 0x0. See imx35-pinfunc.h and > imx25-pinfunc.h: > > git grep -E "0x0+ 0x.* 0x.* 0x.* 0x.*" > > This mux_reg behaviour was not described in the DT binding > documentation. But it is used by some platforms. So even if you change > the pincfunc headers to use "-1", it would break devicetrees compiled > with earlier kernel versions. Ah, sorry, I'm screwed on the previous review. So we still need the flag ZERO_OFFSET_VALID to convert invalid 0 mux_reg to -1. @Adrian, Will the following change just work for you? Shawn diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index d7b98ba36825..ae801ba7e226 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -542,6 +542,9 @@ static int imx_pinctrl_parse_groups(struct device_node *np, struct imx_pin_reg *pin_reg; struct imx_pin *pin = &grp->pins[i]; + if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg) + mux_reg = -1; + if (info->flags & SHARE_MUX_CONF_REG) { conf_reg = mux_reg; } else { @@ -550,7 +553,7 @@ static int imx_pinctrl_parse_groups(struct device_node *np, conf_reg = -1; } - pin_id = mux_reg ? mux_reg / 4 : conf_reg / 4; + pin_id = (mux_reg != -1) ? mux_reg / 4 : conf_reg / 4; pin_reg = &info->pin_regs[pin_id]; pin->pin = pin_id; grp->pin_ids[i] = pin_id; -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html