Re: [PATCH v1 8/8] pwm-pca9685: enable ACPI device found on Galileo Gen2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 22, 2015 at 01:10:19PM +0300, Andy Shevchenko wrote:
> There is a chip connected to i2c bus on Intel Galileo Gen2 board. Enable it via
> ACPI ID INT3492.
> 
> Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> ---
>  drivers/pwm/Kconfig       |  2 +-
>  drivers/pwm/pwm-pca9685.c | 14 +++++++++++---
>  2 files changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 062630a..bb114ef 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -242,7 +242,7 @@ config PWM_MXS
>  
>  config PWM_PCA9685
>  	tristate "NXP PCA9685 PWM driver"
> -	depends on OF && I2C
> +	depends on I2C
>  	select REGMAP_I2C
>  	help
>  	  Generic PWM framework driver for NXP PCA9685 LED controller.
> diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
> index 70448a6..38ea28b 100644
> --- a/drivers/pwm/pwm-pca9685.c
> +++ b/drivers/pwm/pwm-pca9685.c
> @@ -26,6 +26,8 @@
>  #include <linux/regmap.h>
>  #include <linux/slab.h>
>  #include <linux/delay.h>
> +#include <linux/acpi.h>
> +#include <linux/property.h>

These should be kept sorted. I know that delay.h isn't properly ordered
either, I missed that during patch review. Please keep new ones ordered
alphabetically and I'll sort out the delay.h via a separate patch.

>  
>  /*
>   * Because the PCA9685 has only one prescaler per chip, changing the period of
> @@ -297,7 +299,6 @@ static const struct regmap_config pca9685_regmap_i2c_config = {
>  static int pca9685_pwm_probe(struct i2c_client *client,
>  				const struct i2c_device_id *id)
>  {
> -	struct device_node *np = client->dev.of_node;
>  	struct pca9685 *pca;
>  	int ret;
>  	int mode2;
> @@ -320,12 +321,12 @@ static int pca9685_pwm_probe(struct i2c_client *client,
>  
>  	regmap_read(pca->regmap, PCA9685_MODE2, &mode2);
>  
> -	if (of_property_read_bool(np, "invert"))
> +	if (device_property_read_bool(&client->dev, "invert"))
>  		mode2 |= MODE2_INVRT;
>  	else
>  		mode2 &= ~MODE2_INVRT;
>  
> -	if (of_property_read_bool(np, "open-drain"))
> +	if (device_property_read_bool(&client->dev, "open-drain"))
>  		mode2 &= ~MODE2_OUTDRV;
>  	else
>  		mode2 |= MODE2_OUTDRV;
> @@ -363,6 +364,12 @@ static const struct i2c_device_id pca9685_id[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, pca9685_id);
>  
> +static const struct acpi_device_id pca9685_acpi_ids[] = {
> +	{ "INT3492", 0 },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids);
> +
>  static const struct of_device_id pca9685_dt_ids[] = {
>  	{ .compatible = "nxp,pca9685-pwm", },
>  	{ /* sentinel */ }
> @@ -372,6 +379,7 @@ MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
>  static struct i2c_driver pca9685_i2c_driver = {
>  	.driver = {
>  		.name = "pca9685-pwm",
> +		.acpi_match_table = ACPI_PTR(pca9685_acpi_ids),

I think you now need #ifdef protection for the ACPI ID table, otherwise
the compiler will warn that the table is unused for !ACPI.

>  		.of_match_table = pca9685_dt_ids,

Similarly to the above, this should use of_match_ptr(), which in turn
will require #ifdef protection for the table to avoid warnings.

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux