Instead of using id->driver_data directly we copied it to the internal structure. This will help to adapt driver for ACPI use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/gpio/gpio-pca953x.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 50caeb1..242e244 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -42,6 +42,9 @@ #define PCA_INT 0x0100 #define PCA953X_TYPE 0x1000 #define PCA957X_TYPE 0x2000 +#define PCA_TYPE_MASK 0xF000 + +#define PCA_CHIP_TYPE(x) ((x) & PCA_TYPE_MASK) static const struct i2c_device_id pca953x_id[] = { { "pca9505", 40 | PCA953X_TYPE | PCA_INT, }, @@ -95,6 +98,7 @@ struct pca953x_chip { struct gpio_chip gpio_chip; const char *const *names; int chip_type; + unsigned long driver_data; }; static inline struct pca953x_chip *to_pca(struct gpio_chip *gc) @@ -517,14 +521,13 @@ static irqreturn_t pca953x_irq_handler(int irq, void *devid) } static int pca953x_irq_setup(struct pca953x_chip *chip, - const struct i2c_device_id *id, int irq_base) { struct i2c_client *client = chip->client; int ret, i, offset = 0; if (client->irq && irq_base != -1 - && (id->driver_data & PCA_INT)) { + && (chip->driver_data & PCA_INT)) { switch (chip->chip_type) { case PCA953X_TYPE: @@ -581,12 +584,11 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, #else /* CONFIG_GPIO_PCA953X_IRQ */ static int pca953x_irq_setup(struct pca953x_chip *chip, - const struct i2c_device_id *id, int irq_base) { struct i2c_client *client = chip->client; - if (irq_base != -1 && (id->driver_data & PCA_INT)) + if (irq_base != -1 && (chip->driver_data & PCA_INT)) dev_warn(&client->dev, "interrupt support not compiled in\n"); return 0; @@ -673,14 +675,15 @@ static int pca953x_probe(struct i2c_client *client, chip->client = client; - chip->chip_type = id->driver_data & (PCA953X_TYPE | PCA957X_TYPE); + chip->driver_data = id->driver_data; + chip->chip_type = PCA_CHIP_TYPE(chip->driver_data); mutex_init(&chip->i2c_lock); /* initialize cached registers from their original values. * we can't share this chip with another i2c master. */ - pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK); + pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK); if (chip->chip_type == PCA953X_TYPE) ret = device_pca953x_init(chip, invert); @@ -693,7 +696,7 @@ static int pca953x_probe(struct i2c_client *client, if (ret) return ret; - ret = pca953x_irq_setup(chip, id, irq_base); + ret = pca953x_irq_setup(chip, irq_base); if (ret) return ret; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html