On 09/19/2015 11:16 PM, Lee Jones wrote:
On Tue, 15 Sep 2015, Andrew F. Davis wrote:
The TPS65912 PMIC contains several regulators and a GPIO controller.
Add bindings for the TPS65912 PMIC.
Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---
.../devicetree/bindings/gpio/gpio-tps65912.txt | 17 +++++++++
Documentation/devicetree/bindings/mfd/tps65912.txt | 43 ++++++++++++++++++++++
.../bindings/regulator/tps65912-regulator.txt | 32 ++++++++++++++++
3 files changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt
create mode 100644 Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
new file mode 100644
index 0000000..f65370b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
@@ -0,0 +1,17 @@
+* TPS65912 GPIO controller bindings
Suggest s/controller/Controller/
ACK
+Required properties:
+ - compatible : Should be "ti,tps65912-gpio".
+ - gpio-controller : Marks the device node as a gpio controller.
s/gpio/GPIO/
As above for controller.
ACK
+ - #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify the gpio polarity:
+ 0 = active high
+ 1 = active low
Best to use the #defines in include/dt-bindings/gpio.
ACK
+Example:
+
+ gpio4: tps65912_gpio {
+ compatible = "ti,tps65912-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
new file mode 100644
index 0000000..081af66
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
@@ -0,0 +1,43 @@
+* TPS65912 Power Management Integrated Circuit bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65912".
+ - reg : Slave address or chip select number (I2C / SPI).
+ - interrupt-parent : The parent interrupt controller.
+ - interrupts : The interrupt line the device is connected to.
+ - interrupt-controller : Marks the device node as an interrupt controller.
+ - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
s/the/The/
ACK
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ Documentation/devicetree/bindings/interrupts.txt
No such file.
Yeah, this is an unchecked copy/paste on my part, other bindings did it this also, so
I just submitted a patch to fix them too.
+Optional nodes:
+ - Regulators: Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
+ - GPIO: Documentation/devicetree/bindings/gpio/gpio-tps65912.txt.
Better to use ../gpio, ../regulator, etc.
"Regulators" and "GPIO" aren't valid node names.
Please be more specific.
OK, I'll see if I can clear this up.
+Example:
+
+ pmic: tps65912@2d {
+ compatible = "ti,tps65912";
+ reg = <0x2d>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ compatible = "ti,tps65912-dcdc1";
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ ...
No need for this.
ACK
+ gpio4: tps65912_gpio {
+ compatible = "ti,tps65912-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
new file mode 100644
index 0000000..a417ff7
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
@@ -0,0 +1,32 @@
+* TPS65912 regulator bindings
+
+Required properties:
+ - compatible: Should be:
+ - "ti,tps65912-dcdc1" for DCDC1
+ - "ti,tps65912-dcdc2" for DCDC2
+ - "ti,tps65912-dcdc3" for DCDC3
+ - "ti,tps65912-dcdc4" for DCDC4
+ - "ti,tps65912-ldo1" for LDO1
+ - "ti,tps65912-ldo2" for LDO2
+ - "ti,tps65912-ldo3" for LDO3
+ - "ti,tps65912-ldo4" for LDO4
+ - "ti,tps65912-ldo5" for LDO5
+ - "ti,tps65912-ldo6" for LDO6
+ - "ti,tps65912-ldo7" for LDO7
+ - "ti,tps65912-ldo8" for LDO8
+ - "ti,tps65912-ldo9" for LDO9
+ - "ti,tps65912-ldo10" for LDO10
+
+Optional properties:
+ - Any optional property defined in bindings/regulator/regulator.txt
../regulator/...
Not really sure what you mean here?
Thanks,
Andrew
+Example:
+
+ xyz: regulator@0 {
+ compatible = "ti,tps65912-dcdc1";
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
