On 19.09.2015 12:02, Jisheng Zhang wrote:
Add the avio, soc, sm pinctrl nodes for Marvell berlin4ct SoC. This
patch also adds urt0 txd and rxd muxing setup in the dtsi because uart0
always use them to work, no other possibilities.
Please split the patch into two:
one adding the pinctrl nodes and
one adding the default pinmux to uart0 node.
Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
index a3b5f1d..4566e4e 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -225,6 +225,16 @@
};
};
+ soc_pinctrl: pinctrl@ea8000 {
+ compatible = "marvell,berlin4ct-soc-pinctrl";
+ reg = <0xea8000 0x14>;
+ };
+
+ avio_pinctrl: pinctrl@ea8400 {
+ compatible = "marvell,berlin4ct-avio-pinctrl";
+ reg = <0xea8400 8>;
s/8/0x8/
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -278,6 +288,23 @@
clocks = <&osc>;
reg-shift = <2>;
status = "disabled";
+ pinctrl-0 = <&urt0_txd_pmux>, <&urt0_rxd_pmux>;
+ pinctrl-names = "default", "default";
pinctrl-names = "default", "default"; refers to pinctrl-0 and pinctrl-1
respectively. There is no pinctrl-1, so please remove the second
pinctrl-names element.
+ };
+ };
+
+ sm_pinctrl: pinctrl@fe2200 {
+ compatible = "marvell,berlin4ct-sm-pinctrl";
+ reg = <0xfe2200 0xc>;
+
+ urt0_txd_pmux: urt0_txd-pmux {
+ groups = "SM_URT0_TXD";
+ function = "sm_urt0_txd";
+ };
+
+ urt0_rxd_pmux: urt0_rxd-pmux {
+ groups = "SM_URT0_RXD";
+ function = "sm_urt0_rxd";
If you change the driver to generic function names ("uart0") this
boils down to a single
uart0_pmux: uart0-pmux {
groups = "SM_UART0_TXD", "SM_UART0_RXD";
function = "uart0";
};
pinmux node and the reference in uart0 node to
pinctrl-0 = <&uart0_pmux>;
pinctrl-names = "default";
Sebastian
};
};
};
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
