Re: [PATCH 2/2] Documentation: gpio: Update description for X-Gene standby GPIO controller DTS binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 14, 2015 at 10:23 PM, Marc Zyngier <marc.zyngier@xxxxxxx> wrote:
> On 14/09/15 16:06, Y Vo wrote:
>> On Mon, Sep 14, 2015 at 9:47 PM, Arnd Bergmann <arnd@xxxxxxxx> wrote:
>>> On Monday 14 September 2015 16:39:43 Y Vo wrote:
>>>> On Mon, Sep 14, 2015 at 4:11 PM, Arnd Bergmann <arnd@xxxxxxxx> wrote:
>>>>> On Saturday 12 September 2015 12:55:55 Y Vo wrote:
>>>>>> On Fri, Sep 11, 2015 at 11:45 PM, Arnd Bergmann <arnd@xxxxxxxx> wrote:
>>>>>>> On Friday 11 September 2015 22:06:58 Y Vo wrote:
>>>>>>
>>>>>> Example for configure GPIO_DS13 as interrupt and use as button with
>>>>>> the current gpio driver:
>>>>>>         gpio-keys {
>>>>>>                 compatible = "gpio-keys";
>>>>>>                 button@1 {
>>>>>>                         label = "POWER";
>>>>>>                         linux,code = <116>;
>>>>>>                         linux,input-type = <0x1>;
>>>>>>                         interrupts = <0x0 0x2d 0x1>;
>>>>>>                 };
>>>>>>         };
>>>>>
>>>>> Wait, this looks wrong: the gpio driver doesn't actually see
>>>>> the connection here and won't be able to configure the interrupt
>>>>> correctly. The interrupt is already owned by the gpio driver, so
>>>>> you cannot use it in the button node.
>>>>
>>>> In summary:
>>>> - Our GPIO doesn't support interrupt controller.
>>>> - There are 6 pins which used the external interrupt from GIC, so all
>>>> setup for those irqs are from gic driver. The GPIO driver only
>>>> configure to wire those lines.
>>>>
>>>> For your concern:
>>>> - That's correct: if we use that defined, the gpio driver never saw
>>>> the connection here (That's why it already is configued at the
>>>> beginning).
>>>> - At the first time, we tried to use the define: <&sbgpio 13 1>, it
>>>> means using the GPIO_DS13, it will go into the GPIO driver to setup,
>>>> but there is another problem which I have sent out to all of you:
>>>> + It will go into gpio_keys_setup_key (gpio_keys.c driver) function,
>>>> then set the irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
>>>> but the gic only support IRQ_TYPE_LEVEL_HIGH && IRQF_TRIGGER_RISING,
>>>> so it always returns failed at gpio_keys_setup_key function. Please
>>>> see the gic_set_type at gic driver.
>>>
>>> Hmm, I see now how the event handling in the gpio-keys driver differs
>>> between irq mode and gpio mode, where gpio mode relies on getting
>>> a separate event for the release. This is certainly something that
>>> could be changed in the gpio-keys driver as an extension, but that
>>> seems to be what Laxman Dewangan did when he introduced the irq-mode.
>>>
>>>> static int gic_set_type(struct irq_data *d, unsigned int type)
>>>> {
>>>>         void __iomem *base = gic_dist_base(d);
>>>>         unsigned int gicirq = gic_irq(d);
>>>>
>>>>         /* Interrupt configuration for SGIs can't be changed */
>>>>         if (gicirq < 16)
>>>>                 return -EINVAL;
>>>>
>>>>         /* SPIs have restrictions on the supported types */
>>>>         if (gicirq >= 32 && type != IRQ_TYPE_LEVEL_HIGH &&
>>>>                             type != IRQ_TYPE_EDGE_RISING)
>>>>                 return -EINVAL;
>>>>
>>>>         return gic_configure_irq(gicirq, type, base, NULL);
>>>> }
>>>> + Another issue: in order gpio_key works it needs the status of GPIO.
>>>> For our chip, when the GPIO is configued as interrupt, we need to
>>>> access to GIC register to read the real status, it is not acceptable
>>>> to implement accessing GIC registers at gpio driver. The function
>>>> irq_get_irqchip_state(..) also doesn't work in our chip too. Because
>>>> it needs to access different offset.
>>>
>>> I thought we had solved that problem long ago when you first
>>> submitted the driver.
>>>
>>> Did 1b7047edfcfb25 ("genirq: Allow the irqchip state of an IRQ to be
>>> save/restored") not address the problem for you? You were on
>>> Cc to that patch and should have spoken up when the code that was
>>> merged was not sufficient.
>>
>> Yes, I am in this mail-list too, but I also had a issue on this, I
>> think you are still in my submitted for this.
>> Currently, irq_get|set_irqchip_state(..) supports access to
>> GIC_DIST_ENABLE_SET, GIC_DIST_ACTIVE_SET, GIC_DIST_PENDING_SET. But
>> our hw only has the valid value at SPISR register ("[PATCH v4 2/3]
>> irqchip: GIC: Add support for irq_{get,set}_irqchip_state"), so I
>> still can not use it.
>
> And I asked Feng Kan to explain *why* it doesn't work, but nobody ever
> bothered giving me a straight answer on that:
>
> https://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg892972.html
>
> The GIC400 TRM explicitly states that reading GICD_SPISRn is the same as
> reading GICD_ICPENDRn. if that doesn't work for you please explain why.
>
> If I can get a reasonable explanation on *why* it doesn't work, then we
> can look at having an X-Gene specific workaround.
>
I am checking and let you know soon.

Thanks

> Thanks,
>
>         M.
> --
> Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux