- Add shared input select register support - imx7d has two iomux controllers iomuxc and iomuxc-lpsr which share select_input register for daisy chain settings Signed-off-by: Adrian Alonso <aalonso@xxxxxxxxxxxxx> --- Changes for V2: Resend drivers/pinctrl/freescale/pinctrl-imx.c | 28 +++++++++++++++++++++++++++- drivers/pinctrl/freescale/pinctrl-imx.h | 1 + 2 files changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index 9f019be..597319d 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_address.h> #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> @@ -39,6 +40,7 @@ struct imx_pinctrl { struct device *dev; struct pinctrl_dev *pctl; void __iomem *base; + void __iomem *input_sel_base; const struct imx_pinctrl_soc_info *info; }; @@ -254,7 +256,12 @@ static int imx_pmx_set(struct pinctrl_dev *pctldev, unsigned selector, * Regular select input register can never be at offset * 0, and we only print register value for regular case. */ - writel(pin->input_val, ipctl->base + pin->input_reg); + if (info->flags & SHARE_INPUT_SELECT_REG) + writel(pin->input_val, ipctl->input_sel_base + + pin->input_reg); + else + writel(pin->input_val, ipctl->base + + pin->input_reg); dev_dbg(ipctl->dev, "==>select_input: offset 0x%x val 0x%x\n", pin->input_reg, pin->input_val); @@ -690,6 +697,8 @@ static int imx_pinctrl_probe_dt(struct platform_device *pdev, int imx_pinctrl_probe(struct platform_device *pdev, struct imx_pinctrl_soc_info *info) { + struct device_node *dev_np = pdev->dev.of_node; + struct device_node *np; struct imx_pinctrl *ipctl; struct resource *res; int ret; @@ -715,6 +724,23 @@ int imx_pinctrl_probe(struct platform_device *pdev, if (IS_ERR(ipctl->base)) return PTR_ERR(ipctl->base); + if (info->flags & SHARE_INPUT_SELECT_REG) { + np = of_get_child_by_name(dev_np->parent, "iomuxc"); + if (np) { + ipctl->input_sel_base = of_iomap(np, 0); + if (IS_ERR(ipctl->input_sel_base)) { + of_node_put(np); + dev_err(&pdev->dev, + "iomuxc base address not found\n"); + return PTR_ERR(ipctl->input_sel_base); + } + } else { + dev_err(&pdev->dev, "iomuxc device node not foud\n"); + return -EINVAL; + } + of_node_put(np); + } + imx_pinctrl_desc.name = dev_name(&pdev->dev); imx_pinctrl_desc.pins = info->pins; imx_pinctrl_desc.npins = info->npins; diff --git a/drivers/pinctrl/freescale/pinctrl-imx.h b/drivers/pinctrl/freescale/pinctrl-imx.h index 67c07c2..d11a827 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.h +++ b/drivers/pinctrl/freescale/pinctrl-imx.h @@ -86,6 +86,7 @@ struct imx_pinctrl_soc_info { #define SHARE_MUX_CONF_REG 0x1 #define ZERO_OFFSET_VALID 0x2 +#define SHARE_INPUT_SELECT_REG 0x4 #define NO_MUX 0x0 #define NO_PAD 0x0 -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html