Re: [PATCH 1/2 v2] Documentation: gpio: board: add flags parameter to gpiod_get*() functions

[Alexandre Courbot <gnurou@xxxxxxxxx>]

Argh, just noticed I replied to an older version of this patch! The
comment still applies though.

On Sun, Aug 30, 2015 at 6:15 PM, Dirk Behme <dirk.behme@xxxxxxxxx> wrote:
> With commit 39b2bbe3d715 ("gpio: add flags argument to gpiod_get*()
> functions") the gpiod_get*() functions got a 'flags' parameter. Reflect
> this in the documentation, too.
>
> Signed-off-by: Dirk Behme <dirk.behme@xxxxxxxxx>
> ---
>  Documentation/gpio/board.txt | 17 ++++++++---------
>  1 file changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt
> index b80606d..7605773 100644
> --- a/Documentation/gpio/board.txt
> +++ b/Documentation/gpio/board.txt
> @@ -39,11 +39,11 @@ This property will make GPIOs 15, 16 and 17 available to the driver under the
>
>         struct gpio_desc *red, *green, *blue, *power;
>
> -       red = gpiod_get_index(dev, "led", 0);
> -       green = gpiod_get_index(dev, "led", 1);
> -       blue = gpiod_get_index(dev, "led", 2);
> +       red = gpiod_get_index(dev, "led", 0, GPIOD_OUT_HIGH);
> +       green = gpiod_get_index(dev, "led", 1, GPIOD_OUT_HIGH);
> +       blue = gpiod_get_index(dev, "led", 2, GPIOD_OUT_HIGH);
>
> -       power = gpiod_get(dev, "power");
> +       power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
>
>  The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
>  gpiod_is_active_low(power) will be true).
> @@ -142,12 +142,11 @@ The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
>
>         struct gpio_desc *red, *green, *blue, *power;
>
> -       red = gpiod_get_index(dev, "led", 0);
> -       green = gpiod_get_index(dev, "led", 1);
> -       blue = gpiod_get_index(dev, "led", 2);
> +       red = gpiod_get_index(dev, "led", 0, GPIOD_OUT_HIGH);
> +       green = gpiod_get_index(dev, "led", 1, GPIOD_OUT_HIGH);
> +       blue = gpiod_get_index(dev, "led", 2, GPIOD_OUT_HIGH);
>
> -       power = gpiod_get(dev, "power");
> -       gpiod_direction_output(power, 1);
> +       power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
>
>  Since the "power" GPIO is mapped as active-low, its actual signal will be 0
>  after this code. Contrary to the legacy integer GPIO interface, the active-low
> --
> 2.5.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html