Re: [PATCH] gpio: rcar: Fine-grained Runtime PM support

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Thu, Jun 25, 2015 at 4:45 PM, Geert Uytterhoeven
<geert+renesas@xxxxxxxxx> wrote:

> Currently gpio modules are runtime-resumed at probe time. This means the
> gpio module will be active all the time (except during system suspend,
> if not configured as a wake-up source).
>
> While an R-Car Gen2 gpio module retains pins configured for output at
> the requested level while put in standby mode, gpio registercannot be
> accessed while suspended.  Unfortunately pm_runtime_get_sync() cannot be
> called from all contexts where gpio register access is needed. Hence
> move the Runtime PM handling from probe/remove time to gpio request/free
> time, which is probably the best we can do.
>
> On r8a7791/koelsch, gpio modules 0, 1, 3, and 4 are now suspended during
> normal use (gpio2 is used for LEDs and regulators, gpio5 for keys, gpio6
> for SD-Card CD & WP, gpio7 for keys and regulators).
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Patch applied unless Magnus complains.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html