Re: [PATCH v4 2/8] pinctrl: sh-pfc: r8a7790: Implement voltage switching for SDHI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

On Fri, 2015-07-03 at 00:21 +0100, Ben Hutchings wrote:
> On Wed, 2015-07-01 at 10:37 +0300, Laurent Pinchart wrote:
> [...]
> > > +#define PIN_IO_VOLTAGE(bank, _pin, _name, sfx)		\
> > > +	[RCAR_GP_PIN(bank, _pin)].configs = SH_PFC_PIN_CFG_IO_VOLTAGE
> > > +
> > >  static const struct sh_pfc_pin pinmux_pins[] = {
> > >  	PINMUX_GPIO_GP_ALL(),
> > > 
> > > -	/* Pins not associated with a GPIO port */
> > > +	/*
> > > +	 * All pins assigned to GPIO bank 3 can be used for SD interfaces
> > > +	 * in which case they support both 3.3V and 1.8V signalling.
> > > +	 */
> > > +	PORT_GP_32(3, PIN_IO_VOLTAGE, unused),
> > > +
> > > +	/* Pins not associated with a GPIO port, placed after all the GPIOs */
> > > +	[RCAR_GP_PIN(5, 31) + 1] =
> > 
> > I'm sorry but I still don't like this. gcc outputs a warning when overriding 
> > an initializer if you enable -Wextra, which leads me to believe this construct 
> > is dubious. It should at least be tested with LLVM.
> > 
> > I'd much prefer replacing PINMUX_GPIO_GP_ALL() with a version that will 
> > initialize the pins correctly right away.
> [...]
> 
> Something like this?

Laurent, please can you answer whether this is the right way to go.

Ben.

> diff --git a/drivers/pinctrl/sh-pfc/pfc-emev2.c b/drivers/pinctrl/sh-pfc/pfc-emev2.c
> index 849c6943ed30..ad1a8281a91b 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-emev2.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-emev2.c
> @@ -228,7 +228,7 @@ enum {
>  
>  /* Expand to a list of sh_pfc_pin entries (named PORT#).
>   * NOTE: No config are recorded since the driver do not handle pinconf. */
> -#define __PIN_CFG(pn, pfx, sfx)  SH_PFC_PIN_CFG(pfx, 0)
> +#define __PIN_CFG(pn, pfx, sfx)  SH_PFC_PORT_CFG(pfx, 0)
>  #define PINMUX_EMEV_GPIO_ALL()	  CPU_ALL_PORT(__PIN_CFG, , unused)
>  
>  static const struct sh_pfc_pin pinmux_pins[] = {
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
> index 280a56f97786..ca1538371563 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
> @@ -1272,8 +1272,8 @@ static const u16 pinmux_data[] = {
>  #define __IO	(SH_PFC_PIN_CFG_INPUT | SH_PFC_PIN_CFG_OUTPUT)
>  #define __PUD	(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
>  
> -#define R8A73A4_PIN_IO_PU_PD(pin)       SH_PFC_PIN_CFG(pin, __IO | __PUD)
> -#define R8A73A4_PIN_O(pin)              SH_PFC_PIN_CFG(pin, __O)
> +#define R8A73A4_PIN_IO_PU_PD(pin)       SH_PFC_PORT_CFG(pin, __IO | __PUD)
> +#define R8A73A4_PIN_O(pin)              SH_PFC_PORT_CFG(pin, __O)
>  
>  static const struct sh_pfc_pin pinmux_pins[] = {
>  	R8A73A4_PIN_IO_PU_PD(0), R8A73A4_PIN_IO_PU_PD(1),
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
> index b486e9d20cc2..92939cbd7ad0 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
> @@ -1535,15 +1535,15 @@ static const u16 pinmux_data[] = {
>  #define __PU		(SH_PFC_PIN_CFG_PULL_UP)
>  #define __PUD		(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
>  
> -#define R8A7740_PIN_I_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PD)
> -#define R8A7740_PIN_I_PU(pin)		SH_PFC_PIN_CFG(pin, __I | __PU)
> -#define R8A7740_PIN_I_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __I | __PUD)
> -#define R8A7740_PIN_IO(pin)		SH_PFC_PIN_CFG(pin, __IO)
> -#define R8A7740_PIN_IO_PD(pin)		SH_PFC_PIN_CFG(pin, __IO | __PD)
> -#define R8A7740_PIN_IO_PU(pin)		SH_PFC_PIN_CFG(pin, __IO | __PU)
> -#define R8A7740_PIN_IO_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __IO | __PUD)
> -#define R8A7740_PIN_O(pin)		SH_PFC_PIN_CFG(pin, __O)
> -#define R8A7740_PIN_O_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __O | __PUD)
> +#define R8A7740_PIN_I_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PD)
> +#define R8A7740_PIN_I_PU(pin)		SH_PFC_PORT_CFG(pin, __I | __PU)
> +#define R8A7740_PIN_I_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __I | __PUD)
> +#define R8A7740_PIN_IO(pin)		SH_PFC_PORT_CFG(pin, __IO)
> +#define R8A7740_PIN_IO_PD(pin)		SH_PFC_PORT_CFG(pin, __IO | __PD)
> +#define R8A7740_PIN_IO_PU(pin)		SH_PFC_PORT_CFG(pin, __IO | __PU)
> +#define R8A7740_PIN_IO_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __IO | __PUD)
> +#define R8A7740_PIN_O(pin)		SH_PFC_PORT_CFG(pin, __O)
> +#define R8A7740_PIN_O_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __O | __PUD)
>  
>  static const struct sh_pfc_pin pinmux_pins[] = {
>  	/* Table 56-1 (I/O and Pull U/D) */
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> index 1137bbc810cd..1e59e1775374 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> @@ -1740,20 +1740,23 @@ static const u16 pinmux_data[] = {
>  #define PIN_NUMBER(r, c) (((r) - 'A') * 31 + (c) + 200)
>  #define PIN_A_NUMBER(r, c) PIN_NUMBER(ROW_GROUP_A(r), c)
>  
> -#define PIN_IO_VOLTAGE(bank, _pin, _name, sfx)		\
> -	[RCAR_GP_PIN(bank, _pin)].configs = SH_PFC_PIN_CFG_IO_VOLTAGE
> +/*
> + * All pins assigned to GPIO bank 3 can be used for SD interfaces in
> + * which case they support both 3.3V and 1.8V signalling.
> + */
> +#define GP_GPIO_IO_VOLTAGE(bank, _pin, _name, sfx)			\
> +	[RCAR_GP_PIN(bank, _pin)] =					\
> +		SH_PFC_GPIO_CFG(bank, _pin, _name, SH_PFC_PIN_CFG_IO_VOLTAGE)
>  
>  static const struct sh_pfc_pin pinmux_pins[] = {
> -	PINMUX_GPIO_GP_ALL(),
> -
> -	/*
> -	 * All pins assigned to GPIO bank 3 can be used for SD interfaces
> -	 * in which case they support both 3.3V and 1.8V signalling.
> -	 */
> -	PORT_GP_32(3, PIN_IO_VOLTAGE, unused),
> +	PORT_GP_32(0, _GP_GPIO, unused),
> +	PORT_GP_32(1, _GP_GPIO, unused),
> +	PORT_GP_32(2, _GP_GPIO, unused),
> +	PORT_GP_32(3, GP_GPIO_IO_VOLTAGE, unused),
> +	PORT_GP_32(4, _GP_GPIO, unused),
> +	PORT_GP_32(5, _GP_GPIO, unused),
>  
>  	/* Pins not associated with a GPIO port, placed after all the GPIOs */
> -	[RCAR_GP_PIN(5, 31) + 1] =
>  	SH_PFC_PIN_NAMED(ROW_GROUP_A('F'), 15, AF15),
>  	SH_PFC_PIN_NAMED(ROW_GROUP_A('G'), 15, AG15),
>  	SH_PFC_PIN_NAMED(ROW_GROUP_A('H'), 15, AH15),
> diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
> index d2efbfb776ac..2c798550cd8c 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
> @@ -1166,14 +1166,14 @@ static const u16 pinmux_data[] = {
>  #define __PU		(SH_PFC_PIN_CFG_PULL_UP)
>  #define __PUD		(SH_PFC_PIN_CFG_PULL_DOWN | SH_PFC_PIN_CFG_PULL_UP)
>  
> -#define SH73A0_PIN_I_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PD)
> -#define SH73A0_PIN_I_PU(pin)		SH_PFC_PIN_CFG(pin, __I | __PU)
> -#define SH73A0_PIN_I_PU_PD(pin)		SH_PFC_PIN_CFG(pin, __I | __PUD)
> -#define SH73A0_PIN_IO(pin)		SH_PFC_PIN_CFG(pin, __IO)
> -#define SH73A0_PIN_IO_PD(pin)		SH_PFC_PIN_CFG(pin, __IO | __PD)
> -#define SH73A0_PIN_IO_PU(pin)		SH_PFC_PIN_CFG(pin, __IO | __PU)
> -#define SH73A0_PIN_IO_PU_PD(pin)	SH_PFC_PIN_CFG(pin, __IO | __PUD)
> -#define SH73A0_PIN_O(pin)		SH_PFC_PIN_CFG(pin, __O)
> +#define SH73A0_PIN_I_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PD)
> +#define SH73A0_PIN_I_PU(pin)		SH_PFC_PORT_CFG(pin, __I | __PU)
> +#define SH73A0_PIN_I_PU_PD(pin)		SH_PFC_PORT_CFG(pin, __I | __PUD)
> +#define SH73A0_PIN_IO(pin)		SH_PFC_PORT_CFG(pin, __IO)
> +#define SH73A0_PIN_IO_PD(pin)		SH_PFC_PORT_CFG(pin, __IO | __PD)
> +#define SH73A0_PIN_IO_PU(pin)		SH_PFC_PORT_CFG(pin, __IO | __PU)
> +#define SH73A0_PIN_IO_PU_PD(pin)	SH_PFC_PORT_CFG(pin, __IO | __PUD)
> +#define SH73A0_PIN_O(pin)		SH_PFC_PORT_CFG(pin, __O)
>  
>  /* Pin numbers for pins without a corresponding GPIO port number are computed
>   * from the row and column numbers with a 1000 offset to avoid collisions with
> diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h
> index 734f7a92229c..3eca740bba02 100644
> --- a/drivers/pinctrl/sh-pfc/sh_pfc.h
> +++ b/drivers/pinctrl/sh-pfc/sh_pfc.h
> @@ -272,14 +272,18 @@ struct sh_pfc_soc_info {
>  		.enum_id = _pin##_DATA,					\
>  	}
>  
> -/* SH_PFC_PIN_CFG - Expand to a sh_pfc_pin entry (named PORT#) with config */
> -#define SH_PFC_PIN_CFG(_pin, cfgs)					\
> +/* SH_PFC_{PORT,GPIO}_CFG - Expand to a sh_pfc_pin entry with config */
> +#define _SH_PFC_PIN_CFG(_pin, _name, cfgs)				\
>  	{								\
>  		.pin = _pin,						\
> -		.name = __stringify(PORT##_pin),			\
> -		.enum_id = PORT##_pin##_DATA,				\
> +		.name = __stringify(_name),				\
> +		.enum_id = _name##_DATA,				\
>  		.configs = cfgs,					\
>  	}
> +#define SH_PFC_PORT_CFG(_pin, cfgs)				\
> +	_SH_PFC_PIN_CFG(PORT##_pin, PORT##_pin, cfgs)
> +#define SH_PFC_GPIO_CFG(bank, _pin, _name, cfgs)		\
> +	_SH_PFC_PIN_CFG((bank * 32) + _pin, _name, cfgs)
>  
>  /* SH_PFC_PIN_NAMED - Expand to a sh_pfc_pin entry with the given name */
>  #define SH_PFC_PIN_NAMED(row, col, _name)				\
> --- END ---
> 
> If you're happy with that, I'll re-send the series (hopefully for the
> last time!) with the r8a7790 changes squashed into "pinctrl: sh-pfc:
> r8a7790: Implement voltage switching for SDHI" and the SH_PFC_PIN_CFG
> macro change as a new patch before it.
> 
> Ben.
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux