[PATCH v2] gpio/davinci: add interrupt support for GPIOs 16-31

[Vitaly Andrianov <vitalya@xxxxxx>]

Interrupts for GPIOs 16 through 31 are enabled by bit 1 in the
"binten" register (offset 8). Previous versions of GPIO only
used bit 0, which enables GPIO 0-15 interrupts.

Signed-off-by: Vitaly Andrianov <vitalya@xxxxxx>
Reviewed-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
History

v2.
- use GENMASK to set binten. Thanks to Nori Sekhar's.

 drivers/gpio/gpio-davinci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index c5e05c8..86cfe18 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -545,7 +545,7 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
 		chips[0].chip.to_irq = gpio_to_irq_unbanked;
 		chips[0].gpio_irq = bank_irq;
 		chips[0].gpio_unbanked = pdata->gpio_unbanked;
-		binten = BIT(0);
+		binten = GENMASK(pdata->gpio_unbanked / 16, 0);
 
 		/* AINTC handles mask/unmask; GPIO handles triggering */
 		irq = bank_irq;
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html