Re: [PATCH v2 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Nah, I've found this code hard to maintain. I'm attaching simplified version.

Thanks,
Paul

On Wed, 1 Jul 2015, Paul Osmialowski wrote:

Hi Arnd,

Can you look at attached candidate for the third iteration? Is it any better now?

Thanks,
Paul

On Tue, 30 Jun 2015, Arnd Bergmann wrote:

 On Tuesday 30 June 2015 14:27:24 Paul Osmialowski wrote:
>  Based on K70P256M150SF3RM.pdf K70 Sub-Family Reference Manual, Rev. 3.
> > Signed-off-by: Paul Osmialowski <pawelo@xxxxxxxxxxx>
>  ---
>   .../devicetree/bindings/clock/kinetis-clock.txt    |  63 +++
>   arch/arm/boot/dts/kinetis.dtsi                     |  36 ++
>   drivers/clk/Makefile                               |   1 +
> drivers/clk/clk-kinetis.c | 463 > +++++++++++++++++++++
>   4 files changed, 563 insertions(+)
> create mode 100644 > Documentation/devicetree/bindings/clock/kinetis-clock.txt
>   create mode 100644 drivers/clk/clk-kinetis.c
> > diff --git a/Documentation/devicetree/bindings/clock/kinetis-clock.txt > b/Documentation/devicetree/bindings/clock/kinetis-clock.txt
>  new file mode 100644
>  index 0000000..63af6a5
>  --- /dev/null
>  +++ b/Documentation/devicetree/bindings/clock/kinetis-clock.txt
>  @@ -0,0 +1,63 @@
>  +* Clock bindings for Freescale Kinetis SoC
>  +
>  +Required properties:
>  +- compatible: Should be "fsl,kinetis-cmu".
>  +- reg: Two address ranges, one for the Clock Genetator register set,
>  +	one for System Integration Module register set.
> +- Set of clock devices: one fixed-rate-root, fixed-rate clocks and > clock-gates.
>  +
> +For clock-gate addresses see K70 Sub-Family Reference Manual, Rev. 3 > pg. 341 > +and later. Notice that addresses are zero-based, so SIM_SCGC1 has > address 0, > +SIM_SCGC2 has address 1 and so on. The second address component is the > bit
>  +index.

 Please document the sub-nodes that are allowed, and the format
 of the clock specifiers.

>  +
>  +Example:
>  +
>  +cmu@40064000 {
>  +	compatible = "fsl,kinetis-cmu";
>  +	reg = <0x40064000 0x14>, <0x40047000 0x1100>;
>  +
>  +	mcg_outclk: fixed-rate-root@mcgout {
>  +		device_type = "mcgout";
>  +		#clock-cells = <0>;
>  +	};
>  +
>  +	mcg_cclk: fixed-rate@cclk {

 '@' is a reserved character here that is used before the address
 of the device, so this has to be a hexadecimal number without leading
 '0x', and it should match the 'reg' property of the device.

>  +		device_type = "cclk";
>  +		#clock-cells = <0>;
>  +		clocks = <&mcg_outclk>;
>  +	};

 The device_type property here is not a standard identifier,
 and you don't list it as an optional or mandatory property.

 Please remove it and instead use the compatible property, the
 name or the address.

  Arnd

From ae43dcd17eec3eb2c3ad4d7cd514295d935655fe Mon Sep 17 00:00:00 2001
From: Paul Osmialowski <pawelo@xxxxxxxxxxx>
Date: Mon, 29 Jun 2015 20:58:55 +0200
Subject: [PATCH 3/9] arm: twr-k70f120m: clock driver for Kinetis SoC

Based on K70P256M150SF3RM.pdf K70 Sub-Family Reference Manual, Rev. 3.

Signed-off-by: Paul Osmialowski <pawelo@xxxxxxxxxxx>
---
 .../devicetree/bindings/clock/kinetis-clock.txt    |  65 +++
 arch/arm/boot/dts/kinetis.dtsi                     |  29 ++
 drivers/clk/Makefile                               |   1 +
 drivers/clk/clk-kinetis.c                          | 475 +++++++++++++++++++++
 4 files changed, 570 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/kinetis-clock.txt
 create mode 100644 drivers/clk/clk-kinetis.c

diff --git a/Documentation/devicetree/bindings/clock/kinetis-clock.txt b/Documentation/devicetree/bindings/clock/kinetis-clock.txt
new file mode 100644
index 0000000..e6c1cfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/kinetis-clock.txt
@@ -0,0 +1,65 @@
+* Clock bindings for Freescale Kinetis SoC
+
+Required properties:
+- compatible: Should be "fsl,kinetis-cmu".
+- reg: Two address ranges, one for the Multipurpose Clock Genetator (MCG)
+	register set, one for System Integration Module (SIM) register set.
+- Set of clock devices (obligatory):
+	- fixed-rate-mcgout
+		Required properties:
+		- #clock-cells: must be <0>.
+	- fixed-rate-cclk
+		Required properties:
+		- #clock-cells: must be <0>.
+	- fixed-rate-pclk
+		Required properties:
+		- #clock-cells: must be <0>.
+	- cclk-gate
+		Required properties:
+		- #clock-cells: must be <2> (see below).
+	- pclk-gate
+		Required properties:
+		- #clock-cells: must be <2> (see below).
+
+For clock gate addresses see K70 Sub-Family Reference Manual, Rev. 3 pg. 341
+and later. Notice that addresses are zero-based, so SIM_SCGC1 has address 0,
+SIM_SCGC2 has address 1 and so on. The second address component is the bit
+index.
+
+Example:
+
+cmu@40064000 {
+	compatible = "fsl,kinetis-cmu";
+	reg = <0x40064000 0x14>, <0x40047000 0x1100>;
+
+	mcg_outclk: fixed-rate-mcgout {
+		#clock-cells = <0>;
+	};
+
+	mcg_cclk: fixed-rate-cclk {
+		#clock-cells = <0>;
+	};
+
+	mcg_pclk: fixed-rate-pclk {
+		#clock-cells = <0>;
+	};
+
+	mcg_cclk_gate: cclk-gate {
+		#clock-cells = <2>;
+	};
+
+	mcg_pclk_gate: pclk-gate {
+		#clock-cells = <2>;
+	};
+};
+
+uart1: serial@4006b000 {
+	compatible = "fsl,kinetis-lpuart";
+	reg = <0x4006b000 0x1000>;
+	interrupts = <47>, <48>;
+	interrupt-names = "uart-stat", "uart-err";
+	clocks = <&mcg_cclk_gate 3 11>;
+	clock-names = "ipg";
+	dmas = <&edma 0 4>;
+	dma-names = "rx";
+};
diff --git a/arch/arm/boot/dts/kinetis.dtsi b/arch/arm/boot/dts/kinetis.dtsi
index 93d2a8a..42a11c7 100644
--- a/arch/arm/boot/dts/kinetis.dtsi
+++ b/arch/arm/boot/dts/kinetis.dtsi
@@ -3,3 +3,32 @@
  *
  */
 #include "armv7-m.dtsi"
+
+/ {
+	soc {
+		cmu@40064000 {
+			compatible = "fsl,kinetis-cmu";
+			reg = <0x40064000 0x14>, <0x40047000 0x1100>;
+
+			mcg_outclk: fixed-rate-mcgout {
+				#clock-cells = <0>;
+			};
+
+			mcg_cclk: fixed-rate-cclk {
+				#clock-cells = <0>;
+			};
+
+			mcg_pclk: fixed-rate-pclk {
+				#clock-cells = <0>;
+			};
+
+			mcg_cclk_gate: cclk-gate {
+				#clock-cells = <2>;
+			};
+
+			mcg_pclk_gate: pclk-gate {
+				#clock-cells = <2>;
+			};
+		};
+	};
+};
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 63418cf..412d76b 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
+obj-$(CONFIG_ARCH_KINETIS)		+= clk-kinetis.o
 obj-$(CONFIG_MACH_LOONGSON32)		+= clk-ls1x.o
 obj-$(CONFIG_COMMON_CLK_MAX_GEN)	+= clk-max-gen.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
diff --git a/drivers/clk/clk-kinetis.c b/drivers/clk/clk-kinetis.c
new file mode 100644
index 0000000..a6e8a28
--- /dev/null
+++ b/drivers/clk/clk-kinetis.c
@@ -0,0 +1,475 @@
+/*
+ * clk-kinetis.c - Clock driver for Kinetis K70 MCG
+ *
+ * Based on legacy pre-OF code by Alexander Potashev <aspotashev@xxxxxxxxxxx>
+ *
+ * Copyright (C) 2015 Paul Osmialowski <pawelo@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+
+enum kinetis_clk_ids {
+	KINETIS_CLK_MCGOUT = 0,
+	KINETIS_CLK_CCLK,
+	KINETIS_CLK_PCLK,
+	KINETIS_CLK_CCLK_GATE,
+	KINETIS_CLK_PCLK_GATE,
+	KINETIS_CLK_NUM
+};
+
+static const struct {
+	enum kinetis_clk_ids id;
+	const char *name;
+} kinetis_clks[KINETIS_CLK_NUM] = {
+	{ .id = KINETIS_CLK_MCGOUT, .name = "fixed-rate-mcgout", },
+	{ .id = KINETIS_CLK_CCLK, .name = "fixed-rate-cclk", },
+	{ .id = KINETIS_CLK_PCLK, .name = "fixed-rate-pclk", },
+	{ .id = KINETIS_CLK_CCLK_GATE, .name = "cclk-gate", },
+	{ .id = KINETIS_CLK_PCLK_GATE, .name = "pclk-gate", },
+};
+
+/*
+ * Frequencies on OSC0 (EXTAL0/XTAL0) and OSC1 (EXTAL1/XTAL1)
+ *
+ * These frequencies should be set to the same values as in U-Boot.
+ */
+#define KINETIS_OSC0_RATE	50000000	/* 50 MHz */
+#define KINETIS_OSC1_RATE	12000000	/* 12 MHz */
+
+#define KINETIS_SIM_CG_NUMREGS	7
+
+/*
+ * System Integration Module (SIM) register map
+ *
+ * This map actually covers two hardware modules:
+ *     1. SIM low-power logic, at 0x40047000
+ *     2. System integration module (SIM), at 0x40048000
+ */
+struct kinetis_sim_regs {
+	u32 sopt1;	/* System Options Register 1 */
+	u32 rsv0[1024];
+	u32 sopt2;	/* System Options Register 2 */
+	u32 rsv1;
+	u32 sopt4;	/* System Options Register 4 */
+	u32 sopt5;	/* System Options Register 5 */
+	u32 sopt6;	/* System Options Register 6 */
+	u32 sopt7;	/* System Options Register 7 */
+	u32 rsv2[2];
+	u32 sdid;	/* System Device Identification Register */
+	u32 scgc[KINETIS_SIM_CG_NUMREGS];	/* Clock Gating Regs 1...7 */
+	u32 clkdiv1;	/* System Clock Divider Register 1 */
+	u32 clkdiv2;	/* System Clock Divider Register 2 */
+	u32 fcfg1;	/* Flash Configuration Register 1 */
+	u32 fcfg2;	/* Flash Configuration Register 2 */
+	u32 uidh;	/* Unique Identification Register High */
+	u32 uidmh;	/* Unique Identification Register Mid-High */
+	u32 uidml;	/* Unique Identification Register Mid Low */
+	u32 uidl;	/* Unique Identification Register Low */
+	u32 clkdiv3;	/* System Clock Divider Register 3 */
+	u32 clkdiv4;	/* System Clock Divider Register 4 */
+	u32 mcr;	/* Misc Control Register */
+};
+#define KINETIS_SIM_PTR(base, reg) \
+	(&(((struct kinetis_sim_regs *)(base))->reg))
+
+/*
+ * System Clock Divider Register 1
+ */
+/* Clock 1 output divider value (for the core/system clock) */
+#define KINETIS_SIM_CLKDIV1_OUTDIV1_BITS	28
+#define KINETIS_SIM_CLKDIV1_OUTDIV1_MSK \
+	(((1 << 4) - 1) << KINETIS_SIM_CLKDIV1_OUTDIV1_BITS)
+/* Clock 2 output divider value (for the peripheral clock) */
+#define KINETIS_SIM_CLKDIV1_OUTDIV2_BITS	24
+#define KINETIS_SIM_CLKDIV1_OUTDIV2_MSK \
+	(((1 << 4) - 1) << KINETIS_SIM_CLKDIV1_OUTDIV2_BITS)
+
+/*
+ * System Clock Divider Register 2
+ */
+/* USB HS clock divider fraction */
+#define KINETIS_SIM_CLKDIV2_USBHSFRAC_BIT	8
+#define KINETIS_SIM_CLKDIV2_USBHSFRAC_MSK \
+	(1 << KINETIS_SIM_CLKDIV2_USBHSFRAC_BIT)
+/* USB HS clock divider divisor */
+#define KINETIS_SIM_CLKDIV2_USBHSDIV_BIT	9
+#define KINETIS_SIM_CLKDIV2_USBHSDIV_MSK \
+	(7 << KINETIS_SIM_CLKDIV2_USBHSDIV_BIT)
+
+/*
+ * MCG Control 5 Register
+ */
+/* PLL External Reference Divider */
+#define KINETIS_MCG_C5_PRDIV_BITS	0
+#define KINETIS_MCG_C5_PRDIV_MSK \
+	(((1 << 3) - 1) << KINETIS_MCG_C5_PRDIV_BITS)
+/* PLL Stop Enable */
+#define KINETIS_MCG_C5_PLLSTEN_MSK	(1 << 5)
+/* PLL Clock Enable */
+#define KINETIS_MCG_C5_PLLCLKEN_MSK	(1 << 6)
+/* PLL External Reference Select (for K70@120MHz) */
+#define KINETIS_MCG_C5_PLLREFSEL_BIT	7
+#define KINETIS_MCG_C5_PLLREFSEL_MSK	(1 << KINETIS_MCG_C5_PLLREFSEL_BIT)
+/*
+ * MCG Control 6 Register
+ */
+/* VCO Divider */
+#define KINETIS_MCG_C6_VDIV_BITS	0
+#define KINETIS_MCG_C6_VDIV_MSK \
+	(((1 << 5) - 1) << KINETIS_MCG_C6_VDIV_BITS)
+/* PLL Select */
+#define KINETIS_MCG_C6_PLLS_MSK		(1 << 6)
+/*
+ * MCG Control 11 Register
+ */
+/* PLL1 External Reference Divider */
+#define KINETIS_MCG_C11_PRDIV_BITS	0
+#define KINETIS_MCG_C11_PRDIV_MSK \
+	(((1 << 3) - 1) << KINETIS_MCG_C11_PRDIV_BITS)
+/* PLL Clock Select: PLL0 or PLL1 */
+#define KINETIS_MCG_C11_PLLCS_MSK	(1 << 4)
+/* PLL1 Stop Enable */
+#define KINETIS_MCG_C11_PLLSTEN1_MSK	(1 << 5)
+/* PLL1 Clock Enable */
+#define KINETIS_MCG_C11_PLLCLKEN1_MSK	(1 << 6)
+/* PLL1 External Reference Select (for K70@120MHz) */
+#define KINETIS_MCG_C11_PLLREFSEL1_BIT	7
+#define KINETIS_MCG_C11_PLLREFSEL1_MSK	(1 << KINETIS_MCG_C11_PLLREFSEL1_BIT)
+/*
+ * MCG Control 12 Register
+ */
+/* VCO1 Divider */
+#define KINETIS_MCG_C12_VDIV1_BITS	0
+#define KINETIS_MCG_C12_VDIV1_MSK \
+	(((1 << 5) - 1) << KINETIS_MCG_C12_VDIV1_BITS)
+
+/*
+ * Multipurpose Clock Generator (MCG) register map
+ *
+ * See Chapter 25 of the K70 Reference Manual
+ */
+struct kinetis_mcg_regs {
+	u8 c1;		/* MCG Control 1 Register */
+	u8 c2;		/* MCG Control 2 Register */
+	u8 c3;		/* MCG Control 3 Register */
+	u8 c4;		/* MCG Control 4 Register */
+	u8 c5;		/* MCG Control 5 Register */
+	u8 c6;		/* MCG Control 6 Register */
+	u8 status;	/* MCG Status Register */
+	u8 rsv0;
+	u8 atc;		/* MCG Auto Trim Control Register */
+	u8 rsv1;
+	u8 atcvh;	/* MCG Auto Trim Compare Value High Register */
+	u8 atcvl;	/* MCG Auto Trim Compare Value Low Register */
+	u8 c7;		/* MCG Control 7 Register */
+	u8 c8;		/* MCG Control 8 Register */
+	u8 rsv2;
+	u8 c10;		/* MCG Control 10 Register */
+	u8 c11;		/* MCG Control 11 Register */
+	u8 c12;		/* MCG Control 12 Register */
+	u8 status2;	/* MCG Status 2 Register */
+	u8 rsv3;
+};
+#define KINETIS_MCG_PTR(base, reg) \
+	(&(((struct kinetis_mcg_regs *)(base))->reg))
+
+struct kinetis_clk_gate {
+	const char *clk_gate_name;
+	struct clk *clk;
+	u32 reg;
+	u32 idx;
+	struct list_head clk_list;
+};
+
+struct kinetis_clk_gate_data {
+	const char *clk_parent_name;
+	void __iomem *sim;
+	struct list_head clk_gate_list;
+};
+
+static struct clk *kinetis_find_clk_gate(
+		struct kinetis_clk_gate_data *clk_gate_data, u32 reg, u32 idx)
+{
+	struct kinetis_clk_gate *gate;
+
+	list_for_each_entry(gate, &clk_gate_data->clk_gate_list, clk_list)
+		if ((gate->reg == reg) && (gate->idx == idx))
+			return gate->clk;
+
+	return NULL;
+}
+
+static struct clk *kinetis_clk_gate_get(struct of_phandle_args *clkspec,
+					void *data)
+{
+	struct kinetis_clk_gate_data *clk_gate_data = data;
+	struct kinetis_clk_gate *gate;
+	u32 reg = clkspec->args[0];
+	u32 idx = clkspec->args[1];
+	struct clk *clk;
+
+	clk = kinetis_find_clk_gate(clk_gate_data, reg, idx);
+	if (clk)
+		return clk;
+
+	gate = kzalloc(sizeof(struct kinetis_clk_gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+	gate->clk_gate_name = kasprintf(GFP_KERNEL, "%s:%u:%u",
+				clkspec->np->full_name, reg, idx);
+
+	clk = clk_register_gate(NULL, gate->clk_gate_name,
+				clk_gate_data->clk_parent_name, 0,
+				KINETIS_SIM_PTR(clk_gate_data->sim, scgc[reg]),
+				idx, 0, NULL);
+	if (IS_ERR(clk)) {
+		pr_err("Cannot register gate to clock %s\n",
+				clk_gate_data->clk_parent_name);
+		kfree_const(gate->clk_gate_name);
+		kfree(gate);
+		return clk;
+	}
+
+	gate->clk = clk;
+	gate->reg = reg;
+	gate->idx = idx;
+
+	list_add(&gate->clk_list, &clk_gate_data->clk_gate_list);
+
+	return clk;
+}
+
+static int kinetis_of_register_fixed_rate_root(struct device_node *np,
+							u32 clock_val)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_register_fixed_rate(NULL, np->full_name, NULL, CLK_IS_ROOT,
+								    clock_val);
+	if (IS_ERR(clk)) {
+		pr_err("Could not register clock %s\n", np->full_name);
+		return PTR_ERR(clk);
+	}
+
+	ret = of_clk_add_provider(np, of_clk_src_simple_get, clk);
+	if (ret < 0) {
+		pr_err("Could not add clock provider %s\n", np->full_name);
+		clk_unregister(clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int kinetis_of_register_fixed_rate(struct device_node *np,
+					struct device_node *parent_clk,
+					u32 clock_val)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_register_fixed_rate(NULL, np->full_name,
+					parent_clk->full_name, 0, clock_val);
+	if (IS_ERR(clk)) {
+		pr_err("Could not register clock %s\n", np->full_name);
+		return PTR_ERR(clk);
+	}
+
+	ret = of_clk_add_provider(np, of_clk_src_simple_get, clk);
+	if (ret < 0) {
+		pr_err("Could not add clock provider %s\n", np->full_name);
+		clk_unregister(clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int kinetis_of_register_clk_gate(struct device_node *np,
+					struct device_node *parent_clk,
+					void __iomem *sim)
+{
+	struct kinetis_clk_gate_data *clk_gate;
+	int ret;
+
+	clk_gate = kzalloc(sizeof(struct kinetis_clk_gate_data), GFP_KERNEL);
+	if (!clk_gate)
+		return -ENOMEM;
+
+	clk_gate->clk_parent_name = parent_clk->full_name;
+	clk_gate->sim = sim;
+	INIT_LIST_HEAD(&clk_gate->clk_gate_list);
+
+	ret = of_clk_add_provider(np, kinetis_clk_gate_get, clk_gate);
+	if (ret < 0) {
+		pr_err("Could not add clock provider %s\n", np->full_name);
+		kfree(clk_gate);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __init kinetis_mcg_init(struct device_node *np)
+{
+	const int vco_div = 2;
+	const int vdiv_min = 16;
+	u32 clock_val_mcgout;
+	u32 clock_val_cclk;
+	u32 clock_val_pclk;
+	void __iomem *base;
+	void __iomem *sim;
+	int pll_sel;
+	int osc_sel;
+	unsigned long mcgout;
+	struct device_node *child;
+	struct device_node *clk_nodes[KINETIS_CLK_NUM];
+	int i;
+
+	for (i = 0; i < KINETIS_CLK_NUM; i++)
+		clk_nodes[i] = NULL;
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_err("Failed to map address range for kinetis,mcg node\n");
+		return;
+	}
+
+	sim = of_iomap(np, 1);
+	if (!sim) {
+		pr_err("Failed to map address range for kinetis SIM module\n");
+		iounmap(base);
+		return;
+	}
+
+	/*
+	 * Check whether PLL0 or PLL1 is used for MCGOUTCLK
+	 */
+	pll_sel = !!(ioread8(KINETIS_MCG_PTR(base, c11)) &
+				KINETIS_MCG_C11_PLLCS_MSK);
+
+	/*
+	 * Check whether OSC0 or OSC1 is used to source the main PLL
+	 */
+	if (pll_sel)
+		osc_sel = !!(ioread8(KINETIS_MCG_PTR(base, c11)) &
+				KINETIS_MCG_C11_PLLREFSEL1_MSK);
+	else
+		osc_sel = !!(ioread8(KINETIS_MCG_PTR(base, c5)) &
+				KINETIS_MCG_C5_PLLREFSEL_MSK);
+
+	/*
+	 * Start with the MCG input clock
+	 */
+	mcgout = osc_sel ? KINETIS_OSC1_RATE : KINETIS_OSC0_RATE;
+
+	/*
+	 * Apply dividers and multipliers of the selected PLL
+	 */
+	if (pll_sel) {
+		/*
+		 * PLL1 internal divider (PRDIV)
+		 */
+		mcgout /= ((ioread8(KINETIS_MCG_PTR(base, c11)) &
+		  KINETIS_MCG_C11_PRDIV_MSK) >> KINETIS_MCG_C11_PRDIV_BITS) + 1;
+
+		/*
+		 * PLL1 multiplication factor (VDIV)
+		 */
+		mcgout *= ((ioread8(KINETIS_MCG_PTR(base, c12)) &
+		  KINETIS_MCG_C12_VDIV1_MSK) >> KINETIS_MCG_C12_VDIV1_BITS) +
+								    vdiv_min;
+	} else {
+		/*
+		 * PLL0 internal divider (PRDIV)
+		 */
+		mcgout /= ((ioread8(KINETIS_MCG_PTR(base, c5)) &
+			KINETIS_MCG_C5_PRDIV_MSK) >>
+			KINETIS_MCG_C5_PRDIV_BITS) + 1;
+
+		/*
+		 * PLL0 multiplication factor (VDIV)
+		 */
+		mcgout *= ((ioread8(KINETIS_MCG_PTR(base, c6)) &
+			KINETIS_MCG_C6_VDIV_MSK) >>
+			KINETIS_MCG_C6_VDIV_BITS) + vdiv_min;
+	}
+
+	/*
+	 * Apply the PLL output divider
+	 */
+	mcgout /= vco_div;
+
+	clock_val_mcgout = mcgout;
+
+	clock_val_cclk = mcgout /
+		(((ioread32(KINETIS_SIM_PTR(sim, clkdiv1)) &
+			KINETIS_SIM_CLKDIV1_OUTDIV1_MSK) >>
+				KINETIS_SIM_CLKDIV1_OUTDIV1_BITS) + 1);
+
+	/*
+	 * Peripheral (bus) clock
+	 */
+	clock_val_pclk = mcgout /
+		(((ioread32(KINETIS_SIM_PTR(sim, clkdiv1)) &
+			KINETIS_SIM_CLKDIV1_OUTDIV2_MSK) >>
+				KINETIS_SIM_CLKDIV1_OUTDIV2_BITS) + 1);
+
+	for_each_child_of_node(np, child) {
+		if (!of_device_is_available(child))
+			continue;
+
+		for (i = 0; i < KINETIS_CLK_NUM; i++) {
+			if (!of_node_cmp(child->name, kinetis_clks[i].name)) {
+				if (clk_nodes[kinetis_clks[i].id]) {
+					pr_err("more than one %s specified\n",
+								child->name);
+					goto fail;
+				} else
+					clk_nodes[kinetis_clks[i].id] = child;
+			}
+		}
+	}
+
+	for (i = 0; i < KINETIS_CLK_NUM; i++) {
+		if (!(clk_nodes[kinetis_clks[i].id])) {
+			pr_err("One of obligatory clocks NOT specified\n");
+			goto fail;
+		}
+	}
+
+	if (kinetis_of_register_fixed_rate_root(clk_nodes[KINETIS_CLK_MCGOUT],
+						clock_val_mcgout))
+		goto fail;
+
+	if (!(kinetis_of_register_fixed_rate(clk_nodes[KINETIS_CLK_CCLK],
+				clk_nodes[KINETIS_CLK_MCGOUT], clock_val_cclk)))
+		kinetis_of_register_clk_gate(clk_nodes[KINETIS_CLK_CCLK_GATE],
+				clk_nodes[KINETIS_CLK_CCLK], sim);
+
+	if (!(kinetis_of_register_fixed_rate(clk_nodes[KINETIS_CLK_PCLK],
+				clk_nodes[KINETIS_CLK_MCGOUT], clock_val_pclk)))
+		kinetis_of_register_clk_gate(clk_nodes[KINETIS_CLK_PCLK_GATE],
+				clk_nodes[KINETIS_CLK_PCLK], sim);
+
+	return;
+
+fail:
+
+	iounmap(sim);
+	iounmap(base);
+}
+
+CLK_OF_DECLARE(kinetis_mcg, "fsl,kinetis-cmu", kinetis_mcg_init);
-- 
2.3.6


[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux