Re: [PATCH v2 7/9] arm: twr-k70f120m: use Freescale eDMA driver with Kinetis SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Arnd,

Thanks for pointing this - dma-ranges seem to work properly. This makes the patch much simpler. To be included to the next iteration.

I also removed DMA_OF from Kconfig and CONFIG_DMA_OF from my defconfig and it was automatically added during preparation of .cofing for build.

On Tue, 30 Jun 2015, Arnd Bergmann wrote:

On Tuesday 30 June 2015 14:27:28 Paul Osmialowski wrote:
Note that <mach/memory.h> is needed (which is denoted by
CONFIG_NEED_MACH_MEMORY_H) as it provides macros required for proper
operation of DMA allocation functions.

You can't do this, it breaks compilation when multiple platforms
are enabled.

Signed-off-by: Paul Osmialowski <pawelo@xxxxxxxxxxx>
---
 arch/arm/Kconfig                            |  4 ++
 arch/arm/boot/dts/kinetis.dtsi              | 34 ++++++++++++++++
 arch/arm/mach-kinetis/include/mach/memory.h | 61 +++++++++++++++++++++++++++++
 3 files changed, 99 insertions(+)
 create mode 100644 arch/arm/mach-kinetis/include/mach/memory.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b21592b..8ccffee 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -971,6 +971,10 @@ config ARCH_KINETIS
 	select CLKSRC_KINETIS
 	select PINCTRL
 	select PINCTRL_KINETIS
+	select DMADEVICES
+	select FSL_EDMA
+	select DMA_OF
+	select NEED_MACH_MEMORY_H

I think DMA_OF is implied by dmaengine support in combination with CONFIG_OF

+
+#ifndef _MACH_KINETIS_MEMORY_H
+#define _MACH_KINETIS_MEMORY_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * On Kinetis K70, consistent DMA memory resides in a special
+ * DDRAM alias region (non-cacheable DDRAM at 0x80000000).
+ *
+ */
+#define KINETIS_PHYS_DMA_OFFSET UL(0x80000000)
+
+/*
+ * Mask of the field used to distinguish DDRAM aliases
+ */
+#define KINETIS_DRAM_ALIAS_MASK UL(0xf8000000)

This should be expressed using the 'dma-ranges' properties in the
bus nodes above any DMA master, the normal DMA mapping code will
then do the right thing.

	Arnd
From e0b549151b3ee8d4419344a2b5ef461bad19b2af Mon Sep 17 00:00:00 2001
From: Paul Osmialowski <pawelo@xxxxxxxxxxx>
Date: Mon, 29 Jun 2015 23:37:20 +0200
Subject: [PATCH 7/9] arm: twr-k70f120m: use Freescale eDMA driver with Kinetis
 SoC

Signed-off-by: Paul Osmialowski <pawelo@xxxxxxxxxxx>
---
 arch/arm/Kconfig               |  2 ++
 arch/arm/boot/dts/kinetis.dtsi | 36 ++++++++++++++++++++++++++++++++++++
 2 files changed, 38 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b21592b..81a6328 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -971,6 +971,8 @@ config ARCH_KINETIS
 	select CLKSRC_KINETIS
 	select PINCTRL
 	select PINCTRL_KINETIS
+	select DMADEVICES
+	select FSL_EDMA
 	help
 	  This enables support for the Freescale Kinetis MCUs
 
diff --git a/arch/arm/boot/dts/kinetis.dtsi b/arch/arm/boot/dts/kinetis.dtsi
index 5ff1d3b..75fc6d4 100644
--- a/arch/arm/boot/dts/kinetis.dtsi
+++ b/arch/arm/boot/dts/kinetis.dtsi
@@ -19,6 +19,42 @@
 	};
 
 	soc {
+		dma-ranges = <0x80000000 0x00000000 0x08000000>;
+
+		edma: dma-controller@40008000 {
+			compatible = "fsl,kinetis-edma";
+			reg = <0x40008000 0x2000>, /* DMAC */
+				<0x40021000 0x1000>, /* DMAMUX0 */
+				<0x40022000 0x1000>; /* DMAMUX1 */
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts =	 <0>,  <1>,  <2>,  <3>,
+					 <4>,  <5>,  <6>,  <7>,
+					 <8>,  <9>, <10>, <11>,
+					<12>, <13>, <14>, <15>,
+					<16>;
+			interrupt-names = "edma-tx-0,16",
+					  "edma-tx-1,17",
+					  "edma-tx-2,18",
+					  "edma-tx-3,19",
+					  "edma-tx-4,20",
+					  "edma-tx-5,21",
+					  "edma-tx-6,22",
+					  "edma-tx-7,23",
+					  "edma-tx-8,24",
+					  "edma-tx-9,25",
+					  "edma-tx-10,26",
+					  "edma-tx-11,27",
+					  "edma-tx-12,28",
+					  "edma-tx-13,29",
+					  "edma-tx-14,30",
+					  "edma-tx-15,31",
+					  "edma-err";
+			clocks = <&mcg_cclk_gate 6 1>,
+				 <&mcg_pclk_gate 5 1>, <&mcg_pclk_gate 5 2>;
+			clock-names = "edma", "dmamux0", "dmamux1";
+		};
+
 		portA: pinmux@40049000 {
 			compatible = "fsl,kinetis-padconf";
 			reg = <0x40049000 0x1000>;
-- 
2.3.6


[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux