[PATCH v3 5/6] ARM: shmobile: lager: Set clock rates for SDHI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Set the input clocks to the highest supported speeds.

Signed-off-by: Ben Hutchings <ben.hutchings@xxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index aaa4f258e279..5f68e53c58ae 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -488,6 +488,9 @@
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";
 
+	assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
+	assigned-clock-rates = <156000000>;
+
 	vmmc-supply = <&vcc_sdhi0>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
@@ -498,6 +501,9 @@
 	pinctrl-0 = <&sdhi2_pins>;
 	pinctrl-names = "default";
 
+	assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
+	assigned-clock-rates = <97500000>;
+
 	vmmc-supply = <&vcc_sdhi2>;
 	vqmmc-supply = <&vccq_sdhi2>;
 	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-- 
2.1.4




--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux