Re: [PATCH v4 2/7] mmc: mediatek: Add Mediatek MMC driver

[Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>]

On Thu, Jun 04, 2015 at 10:54:03AM +0800, Chaotian Jing wrote:
> On Tue, 2015-05-19 at 13:15 +0200, Sascha Hauer wrote:
> > On Tue, May 19, 2015 at 02:36:46PM +0800, Chaotian Jing wrote:
> > > Add Mediatek MMC driver code
> > > Support eMMC/SD/SDIO
> > > 
> > > Signed-off-by: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>
> > > ---
> > >  drivers/mmc/host/Kconfig  |    8 +
> > >  drivers/mmc/host/Makefile |    1 +
> > >  drivers/mmc/host/mtk-sd.c | 1422 +++++++++++++++++++++++++++++++++++++++++++++
> > >  3 files changed, 1431 insertions(+)
> > >  create mode 100644 drivers/mmc/host/mtk-sd.c
> > > 
> > > +
> > > +	host->src_clk = devm_clk_get(&pdev->dev, "source");
> > > +	if (IS_ERR(host->src_clk)) {
> > > +		ret = PTR_ERR(host->src_clk);
> > > +		goto host_free;
> > > +	}
> > > +
> > > +	host->h_clk = devm_clk_get(&pdev->dev, "hclk");
> > > +	if (IS_ERR(host->h_clk)) {
> > > +		/* host->h_clk is optional, Only for MSDC0/3 at MT8173 */
> > > +		dev_dbg(&pdev->dev,
> > > +				"Invalied hclk from the device tree!\n");
> > > +	}
> > 
> > s/Invalied/Invalid/
> > 
> > According to my reference manual the controller always needs a hclk. It
> > seems on some controllers it is just not software controllable. If
> > that's the case you should always provide a hclk to the driver and make
> > this clock mandatory.
> For MT8173, MSDC1, MSDC2's HCLK are in Infra, software cannot control
> it. So just set the HCLK to clk_null ?

Yes, please.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html