Re: [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday 13 May 2015 18:54:10 Maxime Coquelin wrote:
> This calculation is true, but we have to take into account there is a
> hole in the middle, between AHB3, and APB1 register:
> 
> AHB1RSTR : offset = 0x10, index = 0
> AHB2RSTR : offset = 0x14, index = 1
> AHB3RSTR : offset = 0x18, index = 2
> <HOLE >     : offset = 0x1c, index = 3
> APB1RSTR : offset = 0x20, index = 4
> APB2RSTR : offset = 0x24, index = 5
> 
> So we have to carefully document this hole in the bindings, maybe by
> listing indexes in the documentation?

I would only list the index definitions in the binding if they
are common across all chips using that binding.

>From what I see above, this is really regular, so it's possible
that others follow it as well, but it's also possible that another
chip completely screwed up that system because it didn't fit
otherwise.

Ideally the binding should follow closely what is documented
in the data sheet.

> > Are there parts that need something else? If the 0x10 offset is
> > different, we probably want a different compatible string, and I'd
> > consider it a different part at that point. If there are chips
> > that do not spread the clock from the reset by exactly 256 bits,
> > we could add a DT property in the rcc node for that.
> 
> I will check other chips, to see if this is valid generally.

Ok.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux