On Wed, May 6, 2015 at 12:29 PM, Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> wrote: > This is the convention used in most parts of the kernel including DT > counterpart of I2C slave enumeration. To make things consistent do the same > for ACPI I2C slave enumeration path as well. > > Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> This needs to go through the GPIO tree along with 3/3. Wolfram, can I have your ACK on this patch? Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2 2/3] i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v2 2/3] i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Date: Mon, 11 May 2015 11:58:29 +0200
- In-reply-to: <1430908148-201129-3-git-send-email-mika.westerberg@linux.intel.com>
- References:
- [PATCH v2 0/3] ACPI: Translate Linux IRQ number directly from GpioInt
- From: Mika Westerberg
- [PATCH v2 2/3] i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned
- From: Mika Westerberg
- [PATCH v2 0/3] ACPI: Translate Linux IRQ number directly from GpioInt
- Prev by Date: Re: [PATCH 4/4] gpio: mxc: read output value from GPIO_DR register
- Next by Date: Re: [PATCH v2 3/3] i2c / ACPI: Assign IRQ for devices that have GpioInt automatically
- Previous by thread: [PATCH v2 2/3] i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned
- Next by thread: Re: [PATCH v2 2/3] i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned
- Index(es):
 |