Re: [PATCH V7 04/10] ARM: dts: add imx7d soc dtsi file

[Zhi Li <lznuaa@xxxxxxxxx>]

On Thu, Apr 30, 2015 at 1:07 PM, Fabio Estevam <festevam@xxxxxxxxx> wrote:
> Hi Frank,
>
> On Wed, Apr 29, 2015 at 11:20 AM,  <Frank.Li@xxxxxxxxxxxxx> wrote:
>
>> +       cpus {
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +
>> +               cpu0: cpu@0 {
>> +                       compatible = "arm,cortex-a7";
>> +                       device_type = "cpu";
>> +                       reg = <0>;
>> +                       operating-points = <
>> +                               /* KHz  uV */
>> +                               996000  1075000
>> +                               792000  975000
>> +                       >;
>> +                       clock-latency = <61036>; /* two CLK32 periods */
>> +                       clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>,
>> +                                <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>;
>> +                       clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main";
>> +               };
>> +       };
>
> That's a dual core, so you also need to pass cpu1 ;-)

SMP is not enabled yet.
cpu1 will be added when enable SMP.
I am working on that.

best regards
Frank Li
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html