On Wed, 29 Apr 2015, Shobhit Kumar wrote: > On some BYT PLatform the PWM is controlled using CRC PMIC. Add a lookup > entry for the same to be used by the consumer (Intel GFX) > > v2: Remove the lookup table on driver unload (Thierry) > > CC: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx> > Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> > Cc: Alexandre Courbot <gnurou@xxxxxxxxx> > Cc: Thierry Reding <thierry.reding@xxxxxxxxx> > Signed-off-by: Shobhit Kumar <shobhit.kumar@xxxxxxxxx> > --- > drivers/mfd/intel_soc_pmic_core.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) How do you expect this set to be managed? Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> > diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c > index f3d918e..a00ddd9 100644 > --- a/drivers/mfd/intel_soc_pmic_core.c > +++ b/drivers/mfd/intel_soc_pmic_core.c > @@ -25,6 +25,7 @@ > #include <linux/regmap.h> > #include <linux/mfd/intel_soc_pmic.h> > #include <linux/gpio/machine.h> > +#include <linux/pwm.h> > #include "intel_soc_pmic_core.h" > > /* Lookup table for the Panel Enable/Disable line as GPIO signals */ > @@ -37,6 +38,11 @@ static struct gpiod_lookup_table panel_gpio_table = { > }, > }; > > +/* PWM consumed by the Intel GFX */ > +static struct pwm_lookup crc_pwm_lookup[] = { > + PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_backlight", 0, PWM_POLARITY_NORMAL), > +}; > + > static int intel_soc_pmic_find_gpio_irq(struct device *dev) > { > struct gpio_desc *desc; > @@ -99,6 +105,9 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c, > /* Add lookup table binding for Panel Control to the GPIO Chip */ > gpiod_add_lookup_table(&panel_gpio_table); > > + /* Add lookup table for crc-pwm */ > + pwm_add_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup)); > + > ret = mfd_add_devices(dev, -1, config->cell_dev, > config->n_cell_devs, NULL, 0, > regmap_irq_get_domain(pmic->irq_chip_data)); > @@ -121,6 +130,9 @@ static int intel_soc_pmic_i2c_remove(struct i2c_client *i2c) > /* Remove lookup table for Panel Control from the GPIO Chip */ > gpiod_remove_lookup_table(&panel_gpio_table); > > + /* remove crc-pwm lookup table */ > + pwm_remove_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup)); > + > mfd_remove_devices(&i2c->dev); > > return 0; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html