[RFT][PATCH 2/2] gpio: bcm-kona: Implement get_direction callback

[Axel Lin <axel.lin@xxxxxxxxxx>]

Implement gpio_chip's get_direction() callback, that lets other drivers get
particular GPIOs direction using gpiod_get_direction().

Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
---
 drivers/gpio/gpio-bcm-kona.c | 24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 632352d..3649ed5 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -129,6 +129,14 @@ static int bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
 	return 0;
 }
 
+static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcm_kona_gpio *kona_gpio = to_kona_gpio(chip);
+	void __iomem *reg_base = kona_gpio->reg_base;
+
+	return readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
+}
+
 static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
 {
 	struct bcm_kona_gpio *kona_gpio;
@@ -142,12 +150,8 @@ static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
 	reg_base = kona_gpio->reg_base;
 	spin_lock_irqsave(&kona_gpio->lock, flags);
 
-	/* determine the GPIO pin direction */
-	val = readl(reg_base + GPIO_CONTROL(gpio));
-	val &= GPIO_GPCTR0_IOTR_MASK;
-
 	/* this function only applies to output pin */
-	if (GPIO_GPCTR0_IOTR_CMD_INPUT == val)
+	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
 		goto out;
 
 	reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
@@ -173,13 +177,12 @@ static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
 	reg_base = kona_gpio->reg_base;
 	spin_lock_irqsave(&kona_gpio->lock, flags);
 
-	/* determine the GPIO pin direction */
-	val = readl(reg_base + GPIO_CONTROL(gpio));
-	val &= GPIO_GPCTR0_IOTR_MASK;
+	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
+		reg_offset = GPIO_IN_STATUS(bank_id);
+	else
+		reg_offset = GPIO_OUT_STATUS(bank_id);
 
 	/* read the GPIO bank status */
-	reg_offset = (GPIO_GPCTR0_IOTR_CMD_INPUT == val) ?
-	    GPIO_IN_STATUS(bank_id) : GPIO_OUT_STATUS(bank_id);
 	val = readl(reg_base + reg_offset);
 
 	spin_unlock_irqrestore(&kona_gpio->lock, flags);
@@ -316,6 +319,7 @@ static struct gpio_chip template_chip = {
 	.owner = THIS_MODULE,
 	.request = bcm_kona_gpio_request,
 	.free = bcm_kona_gpio_free,
+	.get_direction = bcm_kona_gpio_get_dir,
 	.direction_input = bcm_kona_gpio_direction_input,
 	.get = bcm_kona_gpio_get,
 	.direction_output = bcm_kona_gpio_direction_output,
-- 
1.9.1



--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html