Re: [PATCH v4 05/15] dt-bindings: Document the STM32 reset bindings

[Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>]

Am Dienstag, den 31.03.2015, 18:24 +0200 schrieb Maxime Coquelin:
> This adds documentation of device tree bindings for the
> STM32 reset controller.
> 
> Tested-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
> ---
>  .../devicetree/bindings/reset/st,stm32-rcc.txt     | 107 +++++++++++++++++++++
>  1 file changed, 107 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
> new file mode 100644
> index 0000000..e2e2f25
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
> @@ -0,0 +1,107 @@
> +STMicroelectronics STM32 Peripheral Reset Controller
> +====================================================
> +
> +The RCC IP is both a reset and a clock controller. This documentation only
> +document the reset part.

documents?

Otherwise,
Acked-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>

regards
Philipp

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html