Re: [PATCH v3 10/15] serial: stm32-usart: Add STM32 USART Driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2015-03-26 16:46 GMT+01:00 Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>:
> On Tue, Mar 24, 2015 at 02:23:38PM -0400, Peter Hurley wrote:
>> Hi Maxime,
>>
>> On 03/12/2015 05:55 PM, Maxime Coquelin wrote:
>> > +static unsigned int stm32_get_mctrl(struct uart_port *port)
>> > +{
>> > +   /*
>> > +    * This routine is used for geting signals of: DTR, DCD, DSR, RI,
>> > +    * and CTS/RTS
>
> It's also worth noting that this comment is wrong.  This is used to get
> the state of DCD, DSR, RI and CTS.  DTR and RTS are *not* included
> because the core tracks their state.

OK, thanks for pointing this.
I will fix the comment in the v4.

>
> ...
>
>> > +   stm32port->clk = devm_clk_get(&pdev->dev, NULL);
>> > +
>> > +   if (WARN_ON(IS_ERR(stm32port->clk)))
>>
>> Do you really need a stack trace here? Could this be dev_err() instead?
>>
>> > +           return -EINVAL;
>
> Also, propagate the error code.
Ok.

>
>> > +
>> > +   /* ensure that clk rate is correct by enabling the clk */
>> > +   clk_prepare_enable(stm32port->clk);
>
> And remember to check the return value of clk_prepare_enable().
I will.

Thanks for the review,
Maxime

>
> --
> FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
> according to speedtest.net.
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux