2015-03-10 22:30 GMT+01:00 Rob Herring <robherring2@xxxxxxxxx>: > On Tue, Mar 10, 2015 at 3:19 PM, Arnd Bergmann <arnd@xxxxxxxx> wrote: >> On Tuesday 10 March 2015 16:28:44 Maxime Coquelin wrote: >>> 2015-03-10 16:00 GMT+01:00 Arnd Bergmann <arnd@xxxxxxxx>: >>> > On Friday 20 February 2015 19:01:04 Maxime Coquelin wrote: >>> >> Some platforms need to initialize the reset controller before the timers. >>> >> >>> >> This patch introduces a reset_controller_of_init() function that can be >>> >> called before the timers intialization. >>> >> >>> >> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx> >>> >> >>> > >>> > Not sure about this. It seems like the cleanest approach if we get >>> > a lot of these, but then again it is probably very rare, and I'd >>> > like to avoid adding such infrastructure if it's just for one >>> > SoC. Could we add a hack in the machine initialization instead? >>> >>> Sun6i also need to initialize the reset controller early. Today, they >>> hack the machine initialization. >>> With two SoCs having the same need, what should we do? >> >> Good question, I'd like to hear some other opinions on this first. > > 2 is still far from the common case. > >>> > I think ideally this would be done in the boot loader before we >>> > even start Linux, but I don't know if that's possible for you. >>> >>> From what I understand, the only constraint is to perform it after the >>> clock is enabled. >>> So this should be possible to do it in the bootloader, but it means >>> also adding timers clocks ungating in the bootloader. >> >> Ungating the timer clock input seems like a reasonable thing to >> do for the bootloader, I think a lot of platforms rely on this >> elsewhere (but enough of them don't, which is why we have the >> early clk init). > > +1 > > If the bootloader is u-boot, then you need a timer anyway. Ok, I moved it to the bootloader, and use the reset as optional in the timer driver. Thanks, Maxime > > Rob -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html