Hi Thomas, On 03/03/2015 15:40, Thomas Petazzoni wrote: > Hello, > > This is the third version of the patch series adding Armada 39x basic > support. > > This set of patches add basic support for a new family of Marvell EBU > processors: the Armada 39x. They are based on Cortex-A9 (like Armada > 375 and 38x) and the most important new feature is probably the > addition of 10 GbE support. > > See http://www.marvell.com/embedded-processors/armada-39x/ for a basic > introduction. > > Note that this web page talks about an Armada 395 and Armada 398, but > so far the technical documentation we have been given access to only > describes Armada 390 and Armada 398, so this series supports only > Armada 390 and Armada 398 so far. Support for Armada 395 might be > added in the future, once we get access to the appropriate technical > details. > > Changes v2 -> v3: > > - Rebased on top of v4.0-rc1 > > - Add support for the L2 cache > > - Added Acked-by from Gregory Clement on > > ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat tables > ARM: mvebu: fix usb@ unit address on Armada 38x to match register address > ARM: mvebu: add missing UART alias on Armada 38x > devicetree: bindings: add DT binding for the Marvell Armada 39x SoC family > > - Renamed 'ARM: mvebu: add missing UART alias on Armada 38x' to 'ARM: > mvebu: add missing UART labels on Armada 38x'. > > - Added a patch 'ARM: mvebu: add UART labels to Armada 375'. > > - Change 'ARM: mvebu: add stdout-path to all armada-*.dts' to go > further and eliminate completely /chosen/bootargs. This removes the > non-desired 'earlyprintk' argument, and since console= was the only > remaining kernel parameter, using stdout-path makes more > sense. Requested by Rob Herring and Mark Rutland. > > - Dropped the patch "ARM: mvebu: use IRQ macros to define the SDHCI > interrupt on Armada 38x" from the series, since Gregory Clement > already submitted it as part of a different series. > > - Added patches 'ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig' > and 'ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig' > to update mvebu_v7_defconfig and multi_v7_defconfig so that they > enable Marvell Armada 39x by default. Suggested by Gregory Clement. > > - Fix the unit address of the MPIC interrupt controller, in both the > newly added Armada 39x support, as well as in the existing Armada > 370, 375, 38x and XP support. Suggested by Gregory Clement. > > Changes v1 -> v2: > > - At the SoC level, add the description of SPI controller 0 and 1, > NAND flash controller, SDHCI controller, Core Divider Clock (needed > by the NAND flash controller), the main PLL clock (needed by the > Core Divider Clock) and the XOR engines. > > - At the board level, add the description of the SPI flash connected > to SPI bus 1, which contains the bootloader, and the description of > the NAND flash. > > - Fix space vs. tab. > > - Use __initconst when defining the dt_compat table for Armada > 39x. Suggested by Stephen Boyd. > > - Fix typo in commit log of "ARM: mvebu: add core support for Armada > 39x", noticed by Maxime Ripard. > > - Remove earlyprintk from /chosen/bootargs. Suggested by Andrew Lunn. > > - Add aliases for uart[0-3]. Suggested by Andrew Lunn. > > - Add /chosen/stdout-path to Armada 398 DB DT. Suggested by Andrew > Lunn. > > - Move pinctrl configurations at the SoC level. Suggested by Andrew > Lunn. > > - Add several preparation/cleanup patches not related to Armada 39x > directly, but whose topics were found while working on Armada 39x > support: > > - Add __initconst to all dt_compat table in mach-mvebu. > - Fixup usb@ unit address on Armada 38x > - Add stdout-path to all armada-*.dts > - Use GIC and IRQ macros in SDHCI definition of Armada 38x > - Add missing UART alias on Armada 38x > > Thanks! > > Thomas > > Thomas Petazzoni (20): > ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat > tables > ARM: mvebu: fix usb@ unit address on Armada 38x to match register > address > ARM: mvebu: add missing UART labels on Armada 38x > ARM: mvebu: add UART labels to Armada 375 > ARM: mvebu: remove aliases for Ethernet devices on Armada > 370/375/38x/XP > ARM: mvebu: add serial port aliases on Armada 370/375/38x/XP > ARM: mvebu: use stdout-path in all armada-*.dts > ARM: mvebu: fix unit address of MPIC nodes > devicetree: bindings: add DT binding for the Marvell Armada 39x SoC > family > devicetree: bindings: update DT bindings for Marvell EBU clock support > devicetree: bindings: add Device Tree bindings for Armada 39x > pin-muxing controller > devicetree: bindings: add new SMP enable method for Marvell Armada 39x > clk: mvebu: extend common code to allow an optional refclk > clk: mvebu: add Marvell Armada 39x driver > pinctrl: mvebu: add pinctrl driver for Marvell Armada 39x > ARM: mvebu: add core support for Armada 39x > ARM: mvebu: add Device Tree files for Armada 39x SoC and board > Documentation: arm: update supported Marvell EBU processors > ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig > ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig Patches 1 applied to mvebu/cleanup Patches 2 to 8 and patch 17 applied to mvebu/dt Patches 9,12,16 and 18 applied to mvebu/soc Patch 19 applied to mvebu/defconfig and Patches 10,13 and 14 applied to mvebu/clk as requested by Mike. I had to amend the patch "ARM: mvebu: fix unit address of MPIC nodes" by removing the armada-38x related part which was already applied by the patch "ARM: mvebu: Fix MPIC unit address". Patch 20 should be directly taken by the arm-soc maintainer. Thanks, Gregory > > Documentation/arm/Marvell/README | 5 + > .../devicetree/bindings/arm/armada-39x.txt | 20 + > Documentation/devicetree/bindings/arm/cpus.txt | 1 + > .../devicetree/bindings/clock/mvebu-core-clock.txt | 9 + > .../bindings/clock/mvebu-gated-clock.txt | 15 +- > .../pinctrl/marvell,armada-39x-pinctrl.txt | 78 ++++ > arch/arm/boot/dts/Makefile | 2 + > arch/arm/boot/dts/armada-370-db.dts | 2 +- > arch/arm/boot/dts/armada-370-mirabox.dts | 2 +- > arch/arm/boot/dts/armada-370-netgear-rn102.dts | 2 +- > arch/arm/boot/dts/armada-370-netgear-rn104.dts | 2 +- > arch/arm/boot/dts/armada-370-rd.dts | 2 +- > arch/arm/boot/dts/armada-370-synology-ds213j.dts | 3 +- > arch/arm/boot/dts/armada-370-xp.dtsi | 6 +- > arch/arm/boot/dts/armada-370.dtsi | 2 +- > arch/arm/boot/dts/armada-375-db.dts | 2 +- > arch/arm/boot/dts/armada-375.dtsi | 10 +- > arch/arm/boot/dts/armada-385-db-ap.dts | 3 +- > arch/arm/boot/dts/armada-388-db.dts | 4 +- > arch/arm/boot/dts/armada-388-gp.dts | 5 +- > arch/arm/boot/dts/armada-388-rd.dts | 2 +- > arch/arm/boot/dts/armada-38x.dtsi | 11 +- > .../dts/{armada-xp-matrix.dts => armada-390.dtsi} | 71 +--- > .../dts/{armada-388-db.dts => armada-398-db.dts} | 111 ++--- > .../dts/{armada-xp-matrix.dts => armada-398.dtsi} | 70 +--- > .../boot/dts/{armada-375.dtsi => armada-39x.dtsi} | 446 ++++++++------------- > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 2 +- > arch/arm/boot/dts/armada-xp-db.dts | 2 +- > arch/arm/boot/dts/armada-xp-gp.dts | 2 +- > arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 3 +- > arch/arm/boot/dts/armada-xp-matrix.dts | 2 +- > arch/arm/boot/dts/armada-xp-mv78260.dtsi | 1 - > arch/arm/boot/dts/armada-xp-mv78460.dtsi | 1 - > arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 2 +- > arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +- > arch/arm/boot/dts/armada-xp-synology-ds414.dts | 3 +- > arch/arm/boot/dts/armada-xp.dtsi | 5 +- > arch/arm/configs/multi_v7_defconfig | 1 + > arch/arm/configs/mvebu_v7_defconfig | 1 + > arch/arm/mach-mvebu/Kconfig | 14 + > arch/arm/mach-mvebu/board-v7.c | 20 +- > arch/arm/mach-mvebu/dove.c | 2 +- > arch/arm/mach-mvebu/kirkwood.c | 2 +- > arch/arm/mach-mvebu/platsmp-a9.c | 2 + > drivers/clk/mvebu/Kconfig | 4 + > drivers/clk/mvebu/Makefile | 1 + > drivers/clk/mvebu/armada-39x.c | 156 +++++++ > drivers/clk/mvebu/common.c | 17 + > drivers/clk/mvebu/common.h | 1 + > drivers/pinctrl/mvebu/Kconfig | 4 + > drivers/pinctrl/mvebu/Makefile | 1 + > drivers/pinctrl/mvebu/pinctrl-armada-39x.c | 432 ++++++++++++++++++++ > 52 files changed, 1045 insertions(+), 524 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/armada-39x.txt > create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt > copy arch/arm/boot/dts/{armada-xp-matrix.dts => armada-390.dtsi} (61%) > copy arch/arm/boot/dts/{armada-388-db.dts => armada-398-db.dts} (70%) > copy arch/arm/boot/dts/{armada-xp-matrix.dts => armada-398.dtsi} (61%) > copy arch/arm/boot/dts/{armada-375.dtsi => armada-39x.dtsi} (55%) > create mode 100644 drivers/clk/mvebu/armada-39x.c > create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-39x.c > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html