[PATCH v2 2/2] pinctrl: qcom: handle input-enable pinconf property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This enables support of 'input-enable' pinconf generic property in
the pinctrl driver.

Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
---
 drivers/pinctrl/qcom/pinctrl-msm.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index d36e511..f3d800f 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -193,6 +193,7 @@ static int msm_config_reg(struct msm_pinctrl *pctrl,
 		*mask = 7;
 		break;
 	case PIN_CONFIG_OUTPUT:
+	case PIN_CONFIG_INPUT_ENABLE:
 		*bit = g->oe_bit;
 		*mask = 1;
 		break;
@@ -260,6 +261,12 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev,
 		val = readl(pctrl->regs + g->io_reg);
 		arg = !!(val & BIT(g->in_bit));
 		break;
+	case PIN_CONFIG_INPUT_ENABLE:
+		/* Pin is output */
+		if (arg)
+			return -EINVAL;
+		arg = 1;
+		break;
 	default:
 		return -ENOTSUPP;
 	}
@@ -330,6 +337,10 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev,
 			/* enable output */
 			arg = 1;
 			break;
+		case PIN_CONFIG_INPUT_ENABLE:
+			/* disable output */
+			arg = 0;
+			break;
 		default:
 			dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
 				param);
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux