On Fri, Feb 20, 2015 at 05:04:24PM +0000, Thomas Petazzoni wrote: > This commit adds the stdout-path property in /chosen for all Armada > boards that were not yet carrying this property. > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/armada-370-db.dts | 1 + > arch/arm/boot/dts/armada-370-mirabox.dts | 1 + > arch/arm/boot/dts/armada-370-netgear-rn102.dts | 1 + > arch/arm/boot/dts/armada-370-netgear-rn104.dts | 1 + > arch/arm/boot/dts/armada-370-rd.dts | 1 + > arch/arm/boot/dts/armada-375-db.dts | 1 + > arch/arm/boot/dts/armada-388-db.dts | 1 + > arch/arm/boot/dts/armada-388-rd.dts | 1 + > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 1 + > arch/arm/boot/dts/armada-xp-db.dts | 1 + > arch/arm/boot/dts/armada-xp-gp.dts | 1 + > arch/arm/boot/dts/armada-xp-matrix.dts | 1 + > arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 1 + > arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 1 + > 14 files changed, 14 insertions(+) > > diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts > index e993c46..286bedd 100644 > --- a/arch/arm/boot/dts/armada-370-db.dts > +++ b/arch/arm/boot/dts/armada-370-db.dts > @@ -56,6 +56,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; stdout-path can now take a config too (including the rate), which will avoid any reliance on the serial core choosing the right rate by default. If you have an alias serial0, this could be: stdout-path = "serial0:115200n8"; Otherwise you can use the full path instead of serial0. That's documented in Documentation/devicetree/bindings/chosen.txt Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html